Brighton and Hove · Fire damper testing
Fire Damper Testing in Roedean
Fire damper testing in Roedean, surveyed first and signed off with a written report and photos. Ask us for a fixed quote.
- Buildings with no damper register
- Dirty dampers that may not close
- Dampers that can’t be reached without an access panel
What your team can do, and what needs us
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Fire damper testing for kitchens and businesses in Roedean
A drop test is simple in principle: we release the blade, watch it close fully, then reset it. We test dampers for sites in Roedean and the rest of Brighton and Hove, logging each one so the record builds year on year. We are often asked to deal with fire dampers with no recent test record and fire dampers nobody can get to, across offices and schools, wall and floor dampers and motorised smoke dampers.
In a village or hamlet like Roedean, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
The paperwork matters as much as the work. Each visit is written up with pictures, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Place
- Roedean (BN2)
- Region
- Brighton and Hove
- Records
- Written report with pictures
- Quote
- A fixed quote up front
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
What the work involves, part by part
Schools, hospitals and care homes
Where residents can’t easily get out, holding fire and smoke back matters even more. Regular damper testing supports that.
Ceiling voids and risers
Ceiling voids are where lots of dampers end up. Ceiling tiles are lifted for access and replaced afterwards.
Leave it or put it right?
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. Rural sites can’t always move to another kitchen or room when something fails.
What you pay depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before we start, so there are no surprises.
Why Roedean businesses choose us
- Full insurance on every job
- CHAS, SafeContractor and ISO 9001
- Work around your opening hours, with 24/7 emergency cover
- Photo reports with every job
Take a look at our cost guide and our accreditations.
How we price fire damper testing
You will get a fixed price before we start. It’s based on:
- Whether several sites go on one quote
- Site requirements such as sign-in and permits
- Parking and loading at the site
- The condition we find in the survey
Several systems or sites on one quote can make for a more efficient booking. Tell us about everything you’d like looked at, and you will get one fixed quote.
Helping us quote
When you contact us, these details help:
- When the site is open and when it’s quiet
- Your last certificate, test record or report
- How we’d reach plant on a roof or in a plant room
- A few general shots of the system
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Your questions about fire damper testing in Roedean
Do you work in villages like Roedean?
Yes, smaller places are covered as well as towns. A survey first, from pictures or a visit, means we arrive with the right kit.
Does the sea air around Roedean make a difference to fire damper testing?
It can, as Roedean is within about 1 mile of the sea, where salt in the air is hard on metal. If corrosion is stopping a blade, the report says so and remedial work can be quoted.
Do you certify fire dampers?
Our paperwork is a test report, not a certificate of compliance. For each damper it shows the result and anything that needs putting right.
How far ahead should we book?
It depends on the time you need and how big the job is. Mention your preferred dates with your enquiry, and for anything urgent, ring our 24/7 emergency line.
Can you price the work without visiting?
Normally, yes. Send a few wide photos plus close-ups of panels, filters or grilles, and a fixed quote normally follows within one working day. If pictures are not enough, we’ll survey first.
What happens to dampers you can’t get to?
We do not leave it off the report; we note it as not reached. Once there’s a panel or a way through the ceiling, it can be tested.
How much does fire damper testing cost?
It depends on the site, so we quote each one individually. For a quote, phone us on 0345 646 2711 or send us an email and tell us about the site and its opening hours.
How often should fire dampers be tested?
The guidance from BESA is at least annually, by a competent person. A test on completion of installation comes first.
Managing agents and facilities teams in Roedean
Records are where multi-site compliance often slips. Each visit produces a dated report with photos, ready to show insurers, fire officers or EHOs.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.
What fire damper testing looks like in Roedean
At about 1 mile from the coast, Roedean is close enough for sea air to matter. Dampers close to louvres and air intakes can corrode in sea air, and a corroded blade may not drop. Food Standards Agency records list about 26 schools, colleges and universities and about 20 hospitals, care homes and childcare premises registered as food businesses in Roedean and the streets around it, up to about 1.5 miles out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. French Convalescent Home is the nearest hospital, about 0.5 miles west of Roedean. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
French Convalescent Home, about 0.5 miles west of Roedean, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests. Royal Pavilion, about 1.9 miles west, is one of the historic houses near Roedean, and older buildings converted to new uses often have ventilation added later.
Roedean is about 2 miles east of Carlton Hill, in Brighton and Hove. We provide fire damper testing for commercial premises of every kind in Roedean and the rest of Brighton and Hove. Our area takes in 30 places across Brighton and Hove, from busy centres to quieter spots.
All of BN2 is within our area for fire damper testing, from busy streets to back roads. If you need fire damper testing at premises on Peel Road, Cliff Road and Henley Road or anywhere close by, our technicians can take on the work. We also cover the places around Roedean: Ovingdean (1 mile east), Rottingdean (1 mile east), Saltdean (3 miles east), East Saltdean (3 miles east) and Falmer (3 miles north). Within a short drive, we also cover Brighton and Hove (4 miles west), Hove (4 miles west), Brunswick (3 miles west), Seven Dials (3 miles north-west), Hollingdean (3 miles north-west) and Prestonville (3 miles north-west).
Near you in Roedean
In Roedean, that means kitchens and buildings near St Mary's Hall, Whitehawk Hill and Longhill High School, among other places. For rail, the closest station is Brighton station, about 2.2 miles north-west of the centre. Well-known places in the area include French Convalescent Home (0.5 miles west) and Churchill Square (2.3 miles west). For a walk, there’s Whitehawk Hill and Newmarket Hill.
When to call us in Roedean
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either can stop the blade dropping fully.
Keep an eye out for any of the following:
- Fire dampers that fail to drop shut
- Missing or out-of-date damper records
- Damper actions from a fire risk assessment
- Motorised smoke dampers due for testing
School buildings such as St Mark's CofE Primary School are typically tested in the holidays, wherever they have dampers.
Before booking anyone
- Which accreditations they hold, and whether you can check them
- Whether inaccessible sections are listed on the report
- If the quote is a fixed price or an estimate
- Whether they recommend a next date
Also near Roedean
Other services in Roedean
How it works
Each visit runs to the same pattern: sheeting and protection first, isolate whatever needs isolating, do the work, tidy up and hand over the paperwork. On site, the work takes from an hour or two in a small building to several visits on a large estate. Seeing the system in photos first means the trip to Roedean can be planned properly.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- We report on every damper, with faults and suggested remedials set out.
Preparing for the visit
- Dig out any earlier paperwork for the system
- Tell us the best time to work, such as after service or at a weekend
- Make sure someone can let us in and lock up afterwards
Getting a quote
Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, you get a fixed price before work begins.