Brighton and Hove · Fire damper testing
Brighton and Hove fire damper testing
Our technicians work in Brighton and Hove on fire damper testing. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- Smoke dampers with no recent test
- Dirty dampers that may not close
- Dampers overdue for their annual drop test
Fire damper testing in Brighton and Hove, done properly
Not every damper relies on heat. Smoke dampers are motorised and are opened and closed by a control system, so testing means running them through their controls and confirming every blade travels fully and comes back. The work covers hospitals and care homes, riser dampers and fusible link fire dampers, and common reasons people get in touch are gaps in the fire damper test log and rusted damper blades and springs.
Smaller commercial buildings in towns like Brighton and Hove may have just a handful of fire dampers, but a damper that has never been tested can stick just as easily as one in a tower block. Dust, grease and corrosion are what stop a blade closing.
The paperwork matters as much as the work. You get a written report with pictures after each visit, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Location
- Brighton and Hove (BN3, BN41, BN1)
- Region
- Brighton and Hove
- Records
- Photo report after every visit
- Quotes
- A fixed price before we start
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
What the work involves, part by part
Offices and retail
Fit-outs and tenant changes are hard on dampers. Testing after a fit-out shows whether anything was disturbed.
Fusible link fire dampers
The link has to be in good order for the damper to work. We check its condition during the test and any problems go on the report.
Towns and villages near Brighton and Hove
Other services in Brighton and Hove
In-house cleaning or a specialist?
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Fire damper testing in Brighton and Hove: local notes
The coast is only about 1 mile from Brighton and Hove. Corrosion is a known cause of damper failure, and coastal air adds to the risk near intakes and louvres. Going by the FSA’s register, there are about 38 schools, colleges and universities, about 88 hospitals, care homes and childcare premises and about 9 hotels, B&Bs and guest houses serving food within about 1.5 miles of central Brighton and Hove. If any of them has ducted ventilation, its dampers need an annual drop test at least. The nearest hospital to Brighton and Hove is Montefiore Hospital, about 1.5 miles east. Where patients or residents may need help to leave a building, working dampers matter all the more.
If you manage a care home or clinic near Brighton and Hove, the testing that a hospital like Montefiore Hospital (about 1.5 miles east) relies on applies to your dampers too. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Portslade Manor is about 1.3 miles west), finding every damper is the first job.
Brighton and Hove is in England. If you need fire damper testing in Brighton and Hove, please give us a ring on 0345 646 2711 or use the quote form for a fixed quote. We work across South East England and London, Brighton and Hove included. 30 places in Brighton and Hove are on our list, large and small.
Work in BN3, BN41 and BN1 follows the same survey, fixed quote and written report as everywhere else we cover. You will find streets such as New Church Road, Princes Square and Station Road, all of which we cover for fire damper testing. With the A270 and A293 close by, Brighton and Hove is easy for our technicians to reach for fire damper testing. Neighbouring places we cover for fire damper testing include Aldrington (1 mile south-west), West Blatchington (1 mile north-east), Hove (1 mile south-east), Prestonville (2 miles east) and Brunswick (2 miles south-east). We also work in nearby towns such as Brighton (3 miles east), Carlton Hill (3 miles east), Hanover (3 miles east), Kemptown (3 miles south-east), Hollingdean (3 miles east) and Whitehawk (4 miles east).
What’s near Brighton and Hove
Typical jobs here are in premises near Hove Park, The Drive Prep School and Hove Park School, among other places. Brighton and Hove has its own railway station: Aldrington station. Well-known places in the area include British Engineerium (0.7 miles north-east) and Churchill Square (2.1 miles south-east). For a walk, there’s Thundersbarrow Hill and Ladies Mile.
How it works
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool first, and the area around the work is covered and protected. On site, it takes a morning or an afternoon for a small number of dampers, longer where there are many. For a site in a town like Brighton and Hove, tell us your opening hours, where we can park and how we reach the roof or plant.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
Before we arrive
- Mention any sign-in, permit or induction we need
- Let us know how we reach the system, including roofs, risers and plant rooms
- Clear loose items from the work area
Ask for a quote
Quotes are quick. Call or email with a few details and you’ll typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Related advice
Your questions about fire damper testing in Brighton and Hove
Can you come to Brighton and Hove after we close?
Yes, out-of-hours work is a big part of what we do. The work in Brighton and Hove can fit around your hours. Just phone us on 0345 646 2711, or send details by email with your opening times and we’ll plan around them.
Is fire damper testing any different in a coastal place like Brighton and Hove?
It can. Being within about 1 mile of the sea means more corrosion on metalwork in Brighton and Hove than inland. If corrosion is stopping a blade, the report says so and remedial work can be quoted.
What if a damper has no access panel?
We record it as not tested and explain why. Access panels can be installed so the damper can be tested next time.
What do you do to protect the area?
Floors and surfaces near the work are sheeted before work begins, and waste is contained as we go. Before we leave, we tidy up and clean down.
Which sectors do you work in?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
Are you insured?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it for clients who vet their contractors.
Can one contract cover all our sites?
Yes. Tell us the addresses and what each needs and we will quote them together.
What do you do with what you remove?
It’s contained and taken away. We collect grease, debris and waste water as we go, so it doesn’t spread.
When something else is needed
In fairness, some problems need a different fix:
- Fire-stopping gaps around the duct where it passes through the wall
- Designing the building’s fire compartments
- Missing dampers that a designer needs to specify
If in doubt, call us on 0345 646 2711 or send us an email and we will say what we think before booking.
Where we work
- Motorised smoke dampers
- Riser dampers
- Hospitals and care homes
- Offices and schools
- Wall and floor dampers
- Fusible link fire dampers
How we price fire damper testing
You will get a fixed price before work begins. It takes into account:
- When the work can happen, such as evenings, overnight or weekends
- Travel, parking and unloading
- The number of sites or systems
- One-off work versus a regular cycle
You will not find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
What to send for a quote
When you contact us, it’s useful to have:
- Problems your staff have spotted
- Wide photos of the system and the area around it
- How we’d reach plant on a roof or in a plant room
- Detail shots of panels, filters and grilles
To help us quote: the address, the type of site and when it’s open, a few photos and the last certificate or report, if there is one. Then call us on 0345 646 2711, or send details by email.
When to call us in Brighton and Hove
Links and springs age like any other part. Damaged or painted links and weak springs mean the blade may stop short, which only shows up when the damper is dropped.
Clients typically contact us after spotting something like this:
- Fire dampers nobody can get to
- Corroded dampers in damp risers and plant rooms
- Dust or grease build-up on damper blades
- Dampers that stick or won’t close fully
A school like West Hove Infant School can have any dampers tested over half-term without disturbing lessons.
What your quote should include
- Whether they recommend a next date
- Whether the whole system is included, or only the parts that are easy to reach
- When they can work, and whether that’s outside your opening hours
- Whether the figure could change on the day
Aftercare tips
Think of this as the after-treatment advice, short and simple:
- Book the next test before the year runs out
- Store test records alongside the fire risk assessment
- Keep an eye out for damp around dampers
- Act on failed dampers rather than leaving them on file
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. If a damper has been disturbed, have it tested again.
Keeping to at least annual testing stops small faults turning into failed dampers. Faults caught early are easier to fix.