Hampshire · Fire damper testing
Fire damper inspection in Pinewood Village
Fire damper testing across Pinewood Village and nearby, timed so the site keeps working and signed off in writing with photos.
- Dampers affected by leaks or condensation
- Damper actions from a fire risk assessment
- Dampers that stick or won’t close fully
How we handle fire damper testing in Pinewood Village
Plenty of buildings have dampers nobody has looked at since they were fitted. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we cannot get to, so you know where the gaps are. Common call-outs are for dampers hidden with no access panel or hatch and motorised smoke dampers due for testing, across hospitals and care homes, wall and floor dampers and motorised smoke dampers.
In smaller places like Pinewood Village, dampers are often in the ductwork serving kitchens, plant rooms and escape routes. Testing is planned around residents, pupils or guests.
We’ve been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Location
- Pinewood Village (GU35)
- Region
- Hampshire
- Paperwork
- Photo report after every visit
- Quote
- A fixed price before any work starts
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
How we price fire damper testing
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How easy every part is to reach
- One-off work versus a regular cycle
- Site requirements such as sign-in and permits
- The condition we find in the survey
The cost depends on the size of the system, what state it’s in and access to every part of it. We give you a fixed price before work begins, so you know where you stand.
What we need to know
There’s no need for technical detail. It helps if you can send:
- Detail shots of panels, filters and grilles
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
If you need fire damper testing in Pinewood Village, give us a ring on 0345 646 2711 or use the quote form. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. We typically send a fixed quote within one working day.
What fire damper testing looks like in Pinewood Village
Food Standards Agency records list about 3 schools, colleges and universities and about 7 caring premises (care homes, nurseries and hospitals) registered as food businesses within 1.5 miles or so of the middle of Pinewood Village. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. Pinewood Village sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises. For Pinewood Village, the closest hospital is Chase Community Hospital, roughly 1.1 miles south. Hospitals are a good example of a building with fire dampers across many floors and departments.
Hospitals such as Chase Community Hospital, about 1.1 miles south, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Pinewood Village, the same annual testing applies.
Pinewood Village is about 5 miles east of Alton, in Hampshire. We carry out fire damper testing for commercial premises of every kind in Pinewood Village and the rest of Hampshire. 683 places in Hampshire are on our list, from busy centres to quieter spots. You can also see our page for Guildford, about 15 miles away.
We work across GU35 for fire damper testing and the streets around it. You’ll find streets such as Camp Road, Budds Lane and Oakley Road, and we cover them all for fire damper testing. We also cover the places around Pinewood Village: Bordon (1 mile south), Lindford (1 mile east), Deadwater (1 mile south-east), Sleaford (1 mile north) and Whitehill (1 mile south). Further out, we also cover Basingstoke (14 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles west) and Petersfield (9 miles south).
Landmarks near Pinewood Village
We work in commercial kitchens and buildings around Mill Chase Academy and the streets around them. For rail, the closest station is Bentley (Hampshire) station, roughly 4.1 miles north. A little further out are The Romany Museum (3.8 miles south-west) and Chase Community Hospital (1.1 miles south). The countryside around Pinewood Village includes Deadwater Valley and Selborne Hill.
Other services in Pinewood Village
When something else is needed
Not every problem is solved by fire damper testing, and we will tell you before any work starts. It won’t put right:
- Fire alarm or control system faults behind a smoke damper
- Holes around ductwork in fire-resisting walls
- Ductwork crossing a fire wall with no damper fitted
If you’re not sure, just give us a ring on 0345 646 2711 or use the quote form and we’ll give you a straight answer before you book.
What we work on in Pinewood Village
- Offices and schools
- Riser dampers
- Wall and floor dampers
- Fusible link fire dampers
- Motorised smoke dampers
- Hospitals and care homes
The process
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes a morning or an afternoon for a small number of dampers, longer where there are many. Around Pinewood Village, access is normally simpler than in a town centre, though gates and roof access are worth mentioning.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Each one that passes is reset, ready to work.
- We report on every damper, with faults and suggested remedials set out.
Before we arrive
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Mention any sign-in, permit or induction we need
- Let us know when the site is closed or quiet
Get a fixed quote
Getting a quote doesn’t take long. Call or email with a few details and you will usually have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Related advice
What happens if it’s left?
When something goes wrong, people ask what checks were in place. A damper test log helps show the responsible person kept on top of things, and you can only produce records for tests that took place. Even a site near Pinewood Village that is only busy part of the week needs its system checked on a schedule.
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before work begins.
Why book with us
- Fixed quotes from a survey or photos
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Full insurance on every job
- Every job surveyed first
Read what affects the cost and our accreditations and certificates.
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.
When to call us in Pinewood Village
Over the life of a building, owners, tenants and contractors come and go, and damper records often get lost along the way. Without a register, nobody knows how many dampers there are or when they were last tested.
Common reasons sites call us are:
- Dampers that stick or will not close fully
- Damper actions from a fire risk assessment
- Gaps in the fire damper test log
- Smoke dampers with no recent test
For schools like Bordon Junior School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Comparing quotes
- What insurance they carry
- When the next visit should be, and why
- What happens if part of the system cannot be accessed
- If the quote is a fixed price or an estimate
Between visits
Aftercare is simple, and it makes the next visit easier:
- Do not let anything obstruct a damper’s blade
- Act on failed dampers rather than leaving them on file
- Brief other trades about dampers in ceilings and risers
- Keep an eye out for damp around dampers
After testing, you get a report listing each of the fire and smoke dampers we tested, with its location and its result. Keep it with the building’s fire safety records so it’s ready when your assessor or insurer asks.
Keeping to at least annual testing stops small faults turning into failed dampers. Faults caught early are easier to fix.
Pinewood Village: your questions answered
Can a school’s dampers in Pinewood Village be tested out of term time?
Yes. The holidays are the usual time for school work. Food Standards Agency records list about 3 schools, colleges and universities with registered kitchens within about a mile and a half of Pinewood Village. Just ring 0345 646 2711 or send us an email with your term dates and we’ll plan around them.
Can you work in Pinewood Village outside opening hours?
Yes, nights and weekends are routine for us. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
How much notice do you need?
That depends on the slot you want and the size of the job. Mention your preferred dates with your enquiry, and for anything urgent, ring our 24/7 emergency line.
How long does fire damper testing take?
Expect it to take from an hour or two in a small building to several visits on a large estate. Access is the biggest factor, and we will give you an idea when we quote.
Is a quote from photos possible?
Typically, yes. Send a few wide pictures plus close-ups of panels, filters or grilles, and we normally come back within one working day. If photos are not enough, we will survey first.
Will we get a certificate for the dampers?
What you receive is a written report of each test, damper by damper. Failures are set out with the remedials we’d suggest.
Do you have insurance?
Yes, fully. We also hold CHAS and SafeContractor, for sites that check contractor safety.
What about areas you can’t get to?
The report shows them clearly. In ductwork, new access panels are often the answer, which we can install.