Hampshire · Fire damper testing
Fire damper testing in Kingsley, Hampshire
Looking for fire damper testing in Kingsley? We diagnose first, fix the price and book the work around your hours, then sign off with a report and pictures.
- Smoke dampers that need testing through their controls
- Dampers overdue for their annual drop test
- Blades that jam part-way when released
How the visit works
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. On site, the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. We agree a date with you, plan the drive to Kingsley and turn up when the site is quiet.
- First we check the schedule and the last set of results.
- Each damper is found and checked for access.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Preparing for the visit
- Let us know about permits to work or site inductions
- Let us know how we reach the system, including roofs, risers and plant rooms
- Make sure equipment near the work can be switched off and left to cool
Get a fixed quote
For a fixed quote, ring 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
Read more
Fire damper testing for kitchens and businesses in Kingsley
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. Spring-operated dampers need testing every year as a minimum. Our job is to do the testing and hand you the paperwork that shows it. If you have rusted damper blades and springs and dampers that stick or won’t close fully, we can put it right, from riser dampers, motorised smoke dampers and wall and floor dampers onwards.
In a village or hamlet like Kingsley, there may be only a few buildings with fire dampers. Each damper still needs testing at least once a year.
A written report with pictures follows every visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Where
- Kingsley (GU35)
- Wider area
- Hampshire
- Records
- Report and photos after the visit
- Quotes
- A fixed price before we start
- Hours
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Between visits
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Tell contractors where dampers are before they start work
- Close off damper faults promptly
- Fix water leaks in plant rooms and risers promptly
- Do not let anything obstruct a damper’s blade
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. If a damper has been disturbed, have it tested again.
Clean ductwork means less dust and grease reaching the dampers. It makes sense to plan duct cleaning and damper testing together.
Do you need fire damper testing in Kingsley?
Other trades work around dampers all the time. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
Clients typically contact us when they notice something like this:
- Dust or grease build-up on damper blades
- Missing or out-of-date damper records
- Corroded dampers in damp risers and plant rooms
- Fire damper items raised by an assessor
For schools like Mill Chase Academy, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Comparing quotes
- Whether a survey comes first
- What insurance they carry
- How VAT is shown on the quote
- What paperwork you get at the end
Part by part
Access panels
Over time, hatches and panels get covered up. Clear access makes the test quicker and less disruptive.
Offices and retail
Each new fit-out brings a risk of damaged or covered dampers. A test after the works shows the dampers still close.
More services for Kingsley
FAQs for Kingsley
Do you cover smaller places like Kingsley?
Yes, we work in villages as well as towns, and Kingsley is covered. The journey is planned ahead, so a few details about the route help.
Can the work in Kingsley be done at night or at weekends?
Yes, nights and weekends are routine for us. The work in Kingsley can fit around your hours. Just call 0345 646 2711 or send us an email with your opening times and we will plan around them.
Are you accredited?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We have been trading since 2009 and we’re fully insured.
Do you test smoke dampers as well?
Yes. Every smoke damper is driven through its controls and checked for full movement. If someone else looks after the controls, we plan the timing with you.
What should I send you?
Just the basics: where it is, what kind of site, when it’s open and the access. Photos and any previous paperwork make it quicker. After that, simply call us on 0345 646 2711 or send us an email.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t legislation, but it’s the standard people check against.
Do we lose a day’s trading?
Not typically. We work when the area is out of use, such as evenings, overnight, early mornings or weekends, so the site can carry on as normal.
What happens to dampers you cannot get to?
It goes on the report as inaccessible, with the reason. Access panels can be installed so the damper can be tested next time.
What a clean will not put right
Fire damper testing can’t fix everything, and we’d rather say so up front. It doesn’t solve:
- Approving the building’s fire strategy
- Fire-stopping gaps around the duct where it passes through the wall
- Missing dampers that a designer needs to specify
Not sure which it is? You can call us on 0345 646 2711 or email us and we’ll tell you honestly.
Where we work
- Offices and schools
- Motorised smoke dampers
- Riser dampers
- Fusible link fire dampers
- Hospitals and care homes
- Wall and floor dampers
What fire damper testing looks like in Kingsley
Chase Community Hospital is the nearest hospital, about 2.3 miles south of Kingsley. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have. Kingsley is covered by Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Chase Community Hospital, about 2.3 miles south of Kingsley, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Kingsley is about 4 miles east of Alton, in Hampshire. Sites in Kingsley get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Our Hampshire coverage runs to 683 places, and Kingsley is one of them. For sites nearby, see our Guildford page, about 15 miles away.
We cover every part of GU35 for fire damper testing and the streets around it. If you need fire damper testing at premises on Forge Road, Woodfield and Churchfields or a nearby road, we can help. Other places close to Kingsley include Sleaford (1 mile east), Pinewood Village (1 mile south), Frithend (2 miles north-east), Bordon (2 miles south) and Lindford (2 miles south-east). Within a short drive, we also cover Basingstoke (13 miles north-west), Farnborough (12 miles north-east), Fleet (10 miles north), Aldershot (9 miles north-east), Alton (4 miles west) and Petersfield (10 miles south).
Near you in Kingsley
Locally, jobs take us to businesses close to The New Inn, among other places. Kingsley’s nearest station is Bentley (Hampshire) station, about 3 miles north of the centre. Well-known places in the area include Chase Community Hospital (2.3 miles south). For a walk, there’s Deadwater Valley and Selborne Hill.
Why it’s worth doing now in Kingsley
Your fire risk assessor or insurer may want evidence that dampers have been tested. Having a current report ready for a building in Kingsley saves a scramble when someone asks. Somewhere as small as Kingsley, losing a kitchen or building to a fault is felt by everyone who uses it.
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll explain each part.
Why us?
- Photo reports with every job
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fixed quotes from a survey or photos
- Accredited under CHAS and SafeContractor, with ISO 9001
Take a look at our cost guide and how to check a contractor.
Landlords, agents and facilities managers
If you look after several sites, we can plan visits across the whole estate and price them together. Each site gets its own report and photos, so each one has its own record.
From a single site to a large estate, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.