Surrey · Fire damper testing
Fire damper inspection in Normandy
One call covers fire damper testing in Normandy: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Smoke dampers with no recent test
- Fire dampers nobody can get to
- Dirty dampers that may not close
About our fire damper testing in Normandy
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Normandy. Send us the damper schedule or the drawings if you have them, and we will plan the testing around when the building is in use. If you have smoke dampers with no recent test and fire dampers that haven’t been tested for over a year, we can put it right, from fusible link fire dampers, wall and floor dampers and riser dampers onwards.
Testing in a small place like Normandy is planned around the journey and access, and the test itself is the same as in any city building.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Normandy (GU3)
- Region
- Surrey
- Paperwork
- Report and photos after the visit
- Quote
- A fixed price before we start
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Signs you need fire damper testing in Normandy
In most buildings, Normandy included, dampers are out of sight in ceiling voids, risers and service shafts. If there’s no hatch to reach them, they slip off everyone’s list, and one that cannot be reached cannot be tested.
Any of these means the system needs a check-up:
- Fire dampers with no recent test record
- Dirty dampers that may not close
- Fire dampers nobody can get to
- Fire dampers that fail to drop shut
School buildings such as Wyke Primary School are normally tested in the holidays, wherever they have dampers.
What your quote should include
- What hours they’ll be on site
- Whether the quote shows VAT
- How areas they can’t reach will be recorded
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
What fire damper testing looks like in Normandy
For Normandy, the closest hospital is Guildford Hospital, roughly 2.6 miles east. Hospitals are a good example of a building with fire dampers across many floors and departments. Surrey Fire and Rescue Service covers Normandy. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
Historic houses near Normandy, with Wanborough Manor about 1.6 miles south, are a reminder that older buildings can hold dampers in unexpected places. Wherever there are offices above shops, near Wanborough station or elsewhere in Normandy, ductwork may cross fire-resisting floors, and any dampers need testing.
Normandy is about 4 miles east of Aldershot, in Surrey. From the centre of Normandy to the outskirts, we cover fire damper testing for every kind of premises, from small sites to large estates. Across Surrey, we cover 395 places, and Normandy is one of them.
Every address in GU3 is covered for fire damper testing, from the main roads to the quietest streets. We cover sites on Manor Farm Close, Guildford Road and Milton Close and the roads around them. If your site is just outside Normandy, we cover Willey Green (1 mile east), Flexford (1 mile south), Christmas Pie (1 mile south), Wyke (1 mile west) and Wanborough (2 miles south). We also work in nearby towns such as Guildford (4 miles east), Woking (6 miles north-east), Camberley (6 miles north-west), Farnham (6 miles south-west), Egham (13 miles north-east) and Walton-on-Thames (14 miles north-east).
Around Normandy
In Normandy, that means kitchens and buildings near Duke of Normandy pub. The nearest railway station is Wanborough station, about 0.7 miles south of the centre. Well-known places in the area include Ash Museum (2.1 miles west) and Guildford Hospital (2.6 miles east). Not far away are Hog's Back and Ash Ranges.
Multi-site and managed buildings
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side, and the report can go to both.
We also work for facilities teams across offices, schools and healthcare across Surrey. Work can be phased by floor, building or site to keep disruption down.
When it’s something else
A few issues sit outside what this work can do:
- Faults in the alarm or building controls that signal smoke dampers
- Designing the building’s fire compartments
- Signing off a building’s overall fire safety
If you’re not sure, just phone us on 0345 646 2711 or use the quote form and we will give you a straight answer.
Parts of the system we cover
- Fusible link fire dampers
- Hospitals and care homes
- Motorised smoke dampers
- Wall and floor dampers
- Offices and schools
- Riser dampers
How the job changes from site to site
Offices and retail
In offices and retail units, dampers tend to be hidden above working areas. Testing can be done outside opening hours to keep disruption down.
Schools, hospitals and care homes
Schools are often easiest to test during the holidays, when ceilings can be opened without disturbing lessons.
Normandy: your questions answered
Can the work in Normandy be done at night or at weekends?
Yes, evening, overnight and weekend work is normal for us. That way a site in Normandy does not have to lose a day’s trading. Your opening times are the first thing we ask for.
Who enforces fire safety at workplaces in Normandy?
It’s Surrey Fire and Rescue Service, which covers Normandy. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Can you quote from pictures?
Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, and the quote follows that.
Do we lose a day’s trading?
Not typically. Out-of-hours visits keep the disruption down. Bigger sites can be done in stages so parts stay in use.
Whose job is it to make sure fire dampers are tested?
Under the Fire Safety Order 2005, it’s the responsible person, who might be the employer, owner, landlord, facilities manager or managing agent. They must keep fire safety measures, including dampers, in working order.
What happens to dampers you can’t get to?
It’s noted as inaccessible rather than skipped. With an access panel fitted, it can be tested on a return visit.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before any work starts, and waste is contained as we go. Before we leave, we tidy up and clean down.
Which sectors do you work in?
Commercial premises of every kind: kitchens, offices, schools, healthcare, retail, leisure and food production. Work is timed around how each site runs.
What affects the cost of fire damper testing
The quote reflects the site in front of us. We consider:
- How many systems or sites are involved
- Site requirements such as sign-in and permits
- A single visit or a regular plan
- The size of the system
Working hours, access and the scale of the site all affect the cost. Each of those is built into the quote, and the price is fixed before work begins.
What we need to know
Photos let us diagnose from a distance. Try to include:
- Any symptoms, from odd noises to smells or leaks
- Wide photos of the system and the area around it
- The site address and the type of premises
- Close-ups of filters, grilles, hatches or access panels
Some systems can be priced from photos; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Nearby places to Normandy
What else we do in Normandy
Keeping the system healthy
To keep the system working properly between visits:
- Diary the annual test well ahead
- Do not let anything obstruct a damper’s blade
- Fix water leaks in plant rooms and risers promptly
- Make sure access panels stay clear and usable
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. If a damper has been disturbed, have it tested again.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
The process
We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool first, and the area around the work is covered and protected. On site, it takes anything from a couple of hours for a handful of dampers to a full day for a large building. Rural roads and tight entrances are worth telling us about before a visit to Normandy.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
Before we arrive
- Let us know when the site is closed or quiet
- Move anything stored near the system
- Let us know about permits to work or site inductions
How to get a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.