Hampshire · Fire damper testing
Fire damper testing in Langstone, Hampshire
Fire damper testing for commercial sites in Langstone and across Hampshire. CHAS, SafeContractor and ISO 9001, and fully insured.
- Smoke dampers with no recent test
- Blades that jam part-way when released
- Dampers hidden with no access panel or hatch
Staff cleaning versus specialist work
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
Fire damper testing in Langstone, done properly
Some dampers haven’t been tested since the day they went in. Ceilings have gone up, access panels have been covered or lost, and the records have gone missing. We find what we can, test what we can reach and list anything we can’t get to, so you know where the gaps are. If you are dealing with smoke dampers with no recent test and buildings with no damper register, we can help, from hospitals and care homes, riser dampers and fusible link fire dampers onwards.
For a building in or near Langstone, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Place
- Langstone (PO9, PO11)
- Wider area
- Hampshire
- Paperwork
- Report and pictures after the visit
- Quotes
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Also near Langstone
Also in Langstone
The process
The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and photos. The middle part takes longest, and that takes anything from a couple of hours for a handful of dampers to a full day for a large building. If the van will struggle with a lane or gateway near Langstone, let us know and we’ll plan around it.
- We go through the damper schedule and any previous faults.
- Each damper is found and checked for access.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Getting ready for the visit
- Name a contact who can let us in at the agreed time
- Clear the space around the work
- Mention any parking or loading restrictions
Get a fixed quote
Want a quote for fire damper testing? Please give us a ring on 0345 646 2711, or send details by email with a few details about the site. We’ll explain what we’d do and send a fixed quote before anything is booked.
Read more
Fixed quotes for fire damper testing in Langstone
There’s no set price list, because sites vary so much. The quote depends on:
- When the work can happen, such as evenings, overnight or weekends
- The number of sites or systems
- One-off work versus a regular cycle
- The scale of the work
We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we will explain what it covers.
What to send for a quote
We can often survey from pictures. The most useful are:
- When the site is open and when it’s quiet
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
To help us quote: the address, the type of site and when it’s open, a few pictures and the last certificate or report, if there is one. Then call us on 0345 646 2711, or email photos.
When something else is needed
We’d rather tell you now than book work that won’t help, so these are the things it won’t cover:
- Designing the building’s fire compartments
- Ductwork crossing a fire wall with no damper fitted
- Signing off a building’s overall fire safety
If you are not sure, just call us on 0345 646 2711, or send details by email and we’ll give you a straight answer before booking.
What we work on in Langstone
- Wall and floor dampers
- Fusible link fire dampers
- Motorised smoke dampers
- Hospitals and care homes
- Offices and schools
- Riser dampers
Langstone questions
Can you come to Langstone after we close?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Langstone needn’t be disturbed. Tell us your opening hours when you ask for a quote.
Does the sea air around Langstone make a difference to fire damper testing?
It can. Langstone is within about 1 mile of the coast, and salt air speeds up corrosion. Annual testing matters even more where corrosion can build up between tests.
Can one contract cover all our sites?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together on one programme. Every site has its own report.
Do you have a 24/7 line?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line and we’ll talk you through the next steps.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.
Is Langstone in your area?
Yes. We work in Langstone and the rest of Hampshire, as part of our work across South East England and London. For a fixed quote, ring 0345 646 2711 or email us.
How much notice do you need?
The more notice, the better, especially for out-of-hours work. Quotes typically come back within one working day, and there’s a 24/7 line for emergencies.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before any work starts, and waste is contained as we go. Before we leave, we tidy up and clean down.
When to call us in Langstone
Buildings in Langstone change owners, tenants and maintenance contractors over the years, and the damper records do not always go with them. With no register, it’s hard to say how many dampers exist, let alone when they were tested.
Signs it’s time to call us include:
- Dirty dampers that may not close
- Buildings with no damper register
- Dampers hidden with no access panel or hatch
- Rusted damper blades and springs
Warblington Castle, about 0.8 miles north-east, is one of the historic houses near Langstone, and older buildings converted to new uses often have ventilation added later.
Questions to ask before you book
- What hours they’ll be on site
- If they look at the system before pricing
- Whether they’re fully insured
- Whether the figure could change on the day
Langstone buildings and fire safety
Sea air reaches Langstone, which sits within about 1 mile of the coast. Salt air speeds up corrosion, and corrosion is one of the things that can stop a fire damper closing. Going by the FSA’s register, there are about 4 schools, colleges and universities, about 20 care, childcare and hospital premises and about 3 hotels, B&Bs and guest houses serving food across Langstone and its immediate surroundings (about a mile and a half). If any of them has ducted ventilation, its dampers need an annual drop test at least. For Langstone, the closest hospital is Havant War Memorial Hospital, roughly 1.1 miles north. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
If you manage a school site such as Bosmere Junior School, any fire dampers can be tested in the holidays. Hospitals such as Havant War Memorial Hospital, about 1.1 miles north, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Langstone, the same annual testing applies.
Langstone is about 2 miles south of Havant, in Hampshire. For fire damper testing in and around Langstone, it’s easy to get a fixed quote: please call 0345 646 2711 or send us an email. Our area covers London and the South East, Langstone included. Langstone is one of 683 towns, villages and districts in Hampshire where we work for commercial clients.
Fire damper testing in PO9 and PO11 is surveyed, quoted and booked the same way as anywhere else. Local streets include Mill Lane, Langstone Road and Langstone High Street, and we cover them all for fire damper testing. You will find Langstone on the A3023, which makes it straightforward for our technicians to reach for fire damper testing. Other places close to Langstone include Warblington (1 mile east), Northney (1 mile south-east), Denvilles (1 mile north-east), Stoke (1 mile south) and North Hayling (1 mile south-east). We also work in nearby towns such as Gosport (8 miles west), Fareham (9 miles west), Horndean (5 miles north), Hedge End (15 miles west), Waterlooville (4 miles north-west) and Petersfield (12 miles north).
Landmarks near Langstone
Typical jobs here are in premises near The Royal Oak pub and Warblington School and the streets around them. The nearest railway station is Havant station, roughly 1.1 miles north. Nearby you will also find Warblington Castle (0.8 miles north-east) and Havant Museum (0.8 miles north). The countryside around Langstone includes Southmoor Nature Reserve.
Different parts, different methods
Smoke dampers
Smoke dampers are motorised and run by a control system. We test them through their controls and check each blade travels fully.
Access panels
Over time, hatches and panels get covered up. Clear access makes the test quicker and less disruptive.
Keeping the system healthy
Aftercare is simple, and it helps at the next visit:
- Brief other trades about dampers in ceilings and risers
- File every damper report where your assessor can find it
- Diary the annual test well ahead
- Make sure access panels stay clear and usable
Failed dampers are set out separately, each with the fault we found, and we can quote for remedials. Once the work is done, the damper is tested again and the record updated.
Keep a damper register: location, type, last test date and result. It stops dampers getting lost as the building changes.