Oxfordshire · Fire damper testing
Fire Damper Testing in Hempton
Fire damper testing for Hempton and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Blades that jam part-way when released
- Smoke dampers with no recent test
- Dirty dampers that may not close
Fire damper testing in Hempton
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we cannot get to, so you know where the gaps are. We’re often asked to deal with fire dampers that haven’t been tested for over a year and dampers flagged on a fire risk assessment, on riser dampers, motorised smoke dampers and wall and floor dampers.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, and the dampers in them are easily forgotten. A first test normally starts with finding them all.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Place
- Hempton (OX15)
- Wider area
- Oxfordshire
- Records
- Written report with pictures
- Quote
- A fixed price before we start
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
What happens if it’s left?
Testing every year builds a history for each damper, which shows patterns early. If the same damper keeps giving trouble, the record shows it before it becomes a failure. A fault that closes a site in a village like Hempton affects everyone who depends on it.
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote and give you a fixed price before we start.
What you get with us
- Ventilation hygiene specialists since 2009
- Each visit written up, with photos
- Work around your opening hours, with 24/7 emergency cover
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
See our cost guide or our accreditations.
Different parts, different methods
Access panels
Testing depends on getting to the damper. Most need an access panel in the duct and a hatch in the ceiling or wall.
Smoke dampers
If a smoke damper will not operate when signalled, it goes on the report as a failure, with a note of what we found.
When to call us in Hempton
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has a duty to keep fire safety measures working, and dampers are part of those measures. Whoever that is, whether employer, owner, landlord, facilities manager or managing agent, needs to be able to show the dampers work.
Keep an eye out for any of the following:
- Dampers that stick or won’t close fully
- Smoke dampers with no recent test
- Fire dampers that haven’t been tested for over a year
- Dampers clogged with dust or grease
The nearest hospital, Horton General Hospital, is about 4.9 miles north; healthcare buildings like it are a reminder that dampers protect people who cannot move quickly.
What to look for in a quote
- Exactly which parts of the system are covered
- Whether the quote shows VAT
- If the quote is a fixed price or an estimate
- When the next visit should be, and why
Fire damper testing in Hempton: local notes
Horton General Hospital is the nearest hospital, about 4.9 miles north of Hempton. Healthcare buildings rely on fire compartments to protect people who can’t easily move, and dampers keep those compartments sealed. Fire safety in Hempton falls to Oxfordshire Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Historic buildings that have had ventilation added later can hide dampers in awkward places; Broughton Castle, about 4.3 miles north-west, is one of the historic houses in the area around Hempton.
Hempton is about 6 miles south of Banbury, in Oxfordshire. If you need fire damper testing in Hempton, it’s easy to get a fixed quote: please call 0345 646 2711, or send details by email. Our area covers London and the South East, Hempton included. 443 places in Oxfordshire are on our list, large and small. You can also see our page for Oxford, about 17 miles away.
We work across the OX15 postcode area for fire damper testing and the streets around it. Whether your site is on Hempton Road, The Lane and St John's Way or anywhere close by, our technicians can take on the work. Other places close to Hempton include Barford St Michael (1 mile north-west), Barford St John (1 mile north-west), Deddington (1 mile east), Nether Worton (2 miles south-west) and Dane Hill (2 miles south-east). Larger places within reach include Banbury (6 miles north), Bicester (10 miles south-east), Witney (15 miles south-west), Kidlington (12 miles south), Bure Park (10 miles south-east) and Chipping Norton (9 miles west).
Near you in Hempton
Typical jobs here are in premises near George Inn. The closest station to Hempton is Kings Sutton station, about 4 miles north-east of the centre. Other landmarks nearby include Bloxham Village Museum (2.5 miles north) and Deddington Castle (1.6 miles east). Green spaces nearby include Crouch Hill.
What your team can do, and what needs us
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
FAQs for Hempton
Is Hempton within the area you cover?
Yes, Hempton is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
Can the work in Hempton be done at night or at weekends?
Yes. We work evenings, overnight and at weekends. It means the site in Hempton keeps running as normal. When you give us a ring on 0345 646 2711 or email us, mention when the site is quiet.
Is a quote from pictures possible?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
Can you set up regular visits?
Yes. We run scheduled maintenance contracts, with visits at the interval your system needs. The report from each visit recommends the next date.
How do you deal with dampers that can’t be reached?
It goes on the report as inaccessible, with the reason. We can fit an access panel so it’s tested on the next visit.
What does TR19 mean?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not law, but it’s the benchmark.
Do you certify fire dampers?
The record we give you is a report of the tests, damper by damper. Any failures come with a note of the remedials needed.
Can you test motorised smoke dampers?
Yes. We test smoke dampers through their control system, as they’re motor driven. Each one is checked for full travel and the result recorded.
Fixed quotes for fire damper testing in Hempton
The quote reflects the site in front of us. We consider:
- A single visit or a regular plan
- Whether we need access equipment or extra panels
- Where the site is and how we reach it
- The times the site is available
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all play a part.
Helping us quote
You don’t need the technical terms. It helps if you can send:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Where the site is and what kind of site it is
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
Need a price for fire damper testing? Please give us a ring on 0345 646 2711 or send us an email with a few details about the site. We will talk you through the work and give you a fixed quote before anything is booked.
Multi-site and managed buildings
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
From a single site to a large estate, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with photos.
The process
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool before we start, and the area around the work is covered and protected. On site, it takes a morning or an afternoon for a small number of dampers, longer where there are many. Pictures of the system and its access let us plan the work in Hempton before we set off.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
How to prepare
- Agree a time when the area can be out of use
- Let us know about parking and loading
- Tell us about site rules, permits or sign-in
How to get a quote
To get a fixed quote, call us on 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will typically have a quote within one working day.