Oxfordshire · Fire damper testing
Fire damper inspection in Bure Park
Fire damper testing for businesses, landlords and public buildings in Bure Park. CHAS, SafeContractor and ISO 9001, and fully insured.
- Dampers overdue for their annual drop test
- Dirty dampers that may not close
- Gaps in the fire damper test log
Fire damper testing in Bure Park, done properly
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Bure Park. If there’s a damper register or a set of drawings, share it with us, and we’ll plan the visit around the building’s hours. Typical jobs include dampers affected by leaks or condensation and dirty dampers that may not close, across hospitals and care homes, riser dampers and fusible link fire dampers.
In smaller places like Bure Park, dampers are often in the ductwork serving kitchens, plant rooms and escape routes. We plan the work around the people using the building.
Nothing is signed off by word of mouth: a written report, dated and illustrated with photos, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.
- Location
- Bure Park (OX26, OX27)
- Region
- Oxfordshire
- Records
- Report and photos after the visit
- Price
- A fixed price before any work starts
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Bure Park questions
Can you get to a site in Bure Park?
Yes. Bure Park is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Can fire dampers in schools around Bure Park be tested in the holidays?
Yes, and it’s the easiest time to do it. There are about 8 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Bure Park. You can ring 0345 646 2711 or use the quote form with the dates the site is empty.
What if a damper has no access panel?
Any damper we cannot reach is listed on the report so nothing is quietly missed. Fitting an access panel is the usual fix, and we can quote for it.
Will we get a certificate for the dampers?
We test, record and report, rather than certify dampers to a standard. For each damper it shows the result and anything that needs putting right.
What does TR19 mean?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
How often does BESA say fire dampers should be tested?
BESA’s guidance is a test on installation and at least once a year after that. Some sites choose to test more often where the risk is higher.
How much does fire damper testing cost?
We don’t publish prices, because the cost depends on the job: how big it is, what state it’s in, how we reach it and the working hours. We fix the price before any work starts.
Who is responsible for fire damper testing?
It’s the responsible person, under the Fire Safety Order 2005. Testing at least yearly and keeping the reports is how they can show it’s being done.
What your team can do, and what needs us
Staff cleaning does not replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you can’t see still need a specialist at the right interval.
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
The process
We’re used to working while the site is closed. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. On site, the work takes from an hour or two in a small building to several visits on a large estate. Getting to the system matters more than parking in a place like Bure Park, so let us know how to reach it.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- Panels and tiles go back, and the results are written up.
How to prepare
- Dig out any earlier paperwork for the system
- Plan for cooking equipment or plant to be off before we arrive
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
How to get a quote
To help us quote: the address, the type of site and when it’s open, a few pictures and the last certificate or report, if there is one. Then call us on 0345 646 2711 or drop us a line.
Advice
Fire damper testing in Bure Park: local notes
Food Standards Agency records list about 8 schools, colleges and universities, about 5 care, childcare and hospital premises and about 4 hotels and B&Bs registered as food businesses in and around Bure Park, up to about a mile and a half out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. The nearest hospital to Bure Park is Bicester Community Hospital, about 1 mile south. Where patients or residents may need help to leave a building, working dampers matter all the more. Oxfordshire Fire and Rescue Service covers Bure Park. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
The nearest hospital, Bicester Community Hospital, is about 1 mile south; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly. Site managers at schools such as Bure Park Primary School typically find the summer break the easiest time for ceiling work like damper testing.
Bure Park is about 1 mile north of Bicester, in Oxfordshire. Every kind of commercial site in Bure Park, we can take on fire damper testing. We can work out of hours so trading isn’t interrupted. Our Oxfordshire coverage runs to 443 places, Bure Park among them. Oxford is in our area too, around 11 miles away.
Here we cover the OX26 and OX27 postcode area for fire damper testing. Whether your site is on Blake Road, Graham Road and Bunyan Road or anywhere close by, our technicians can take on the work. Bure Park sits on or near the A4095, so getting to you is simple for evening and night visits. Neighbouring places we cover for fire damper testing include Bicester (1 mile south), Caversfield (1 mile north-east), Bucknell (2 miles north-west), Stratton Audley (2 miles north-east) and Stoke Lyne (3 miles north). Within a short drive, we also cover Oxford (11 miles south), Banbury (13 miles north-west), Thame (14 miles south-east), Kidlington (8 miles south-west), Headington Quarry (11 miles south) and St John Street area (12 miles south-west).
Around Bure Park
We work in commercial kitchens and buildings around The Star pub and Cooper School, among other places. For rail, the closest station is Bicester North station, roughly 0.6 miles south-east. A little further out are Bicester Village (1.3 miles south) and Bicester Community Hospital (1 mile south). Green spaces nearby include Graven Hill and Woodsides Meadow.
What happens if it’s left?
If a damper cannot close, the wall it sits in has a hole in it during a fire. Everything else about the compartment can be right and the duct still lets it down. It’s far better to find that out on a test than in a fire. Even a site near Bure Park that’s only busy part of the week needs its system checked on a schedule.
When the work has to happen, how we reach it and how big the site is all affect the cost. We take each of them into account, and the price is fixed before we start.
Why book with us
- A fixed price before any work starts
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- CHAS and SafeContractor accredited, with ISO 9001
- A single point of contact for sites across the South East and London
Take a look at what affects the cost or our accreditations and certificates.
Also near Bure Park
More services for Bure Park
Different parts, different methods
Fusible link fire dampers
Most fire dampers are held open by a fusible link. Heat melts the link and the blade falls shut across the duct. We release the blade, check it closes fully and reset it.
Access panels
Over time, hatches and panels get covered up. Clear access makes the test quicker and less disruptive.
What fire damper testing cannot fix
In fairness, there are a few things this work will not fix:
- Faults in the alarm or building controls that signal smoke dampers
- Dampers that were never installed where they’re needed
- Signing off a building’s overall fire safety
If you are not sure, just phone us on 0345 646 2711, or send details by email and we will give you a straight answer.
Parts of the system we cover
- Riser dampers
- Hospitals and care homes
- Wall and floor dampers
- Fusible link fire dampers
- Motorised smoke dampers
- Offices and schools
Fixed quotes for fire damper testing in Bure Park
Before we fix a price, we need to know a few things. We look at:
- The number of sites or systems
- When the work can happen, such as evenings, overnight or weekends
- Site rules, permits and inductions
- The size of the system
We don’t list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
What to send for a quote
There’s no need for technical detail. Just send:
- Where the site is and what kind of site it is
- A few general shots of the system
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Close-ups of filters, grilles, hatches or access panels
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
Do you need fire damper testing in Bure Park?
In most buildings, Bure Park included, dampers are out of sight in ceiling voids, risers and service shafts. If there’s no hatch to reach them, they slip off everyone’s list, and one that can’t be reached can’t be tested.
Clients usually contact us when they notice something like this:
- Fire dampers that fail to drop shut
- Dampers overdue for their annual drop test
- Buildings with no damper register
- Smoke dampers that need testing through their controls
Wherever there are offices above shops, near Bicester North station or elsewhere in Bure Park, ductwork may cross fire-resisting floors, and any dampers need testing.
Comparing quotes
- What hours they’ll be on site
- If they look at the system before pricing
- How VAT is shown on the quote
- How areas they can’t reach will be recorded