Oxfordshire · Fire damper testing
Fire damper inspection in Fulbrook
Professional fire damper testing in and around Fulbrook, timed so the site keeps working and finished with a written report and pictures.
- Buildings with no damper register
- Dampers that stick or will not close fully
- Dampers overdue for their annual drop test
Common questions in Fulbrook
Who enforces fire safety at workplaces in Fulbrook?
It’s Oxfordshire Fire and Rescue Service, which covers Fulbrook. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Can you work in Fulbrook outside opening hours?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Just call 0345 646 2711 or email us with your opening times and we will plan around them.
Can you look after several sites?
Yes. Send the list of sites and the work at each and we will quote them together.
What information do you need?
Only a few details: the address, the site type, your opening hours and how we reach the system. Photos and any previous paperwork make it quicker. After that, simply give us a ring on 0345 646 2711 or use the quote form.
How often does BESA say fire dampers should be tested?
BESA’s guidance is a test on installation and at least once a year after that. Some sites choose to test more often where the risk is higher.
Who is responsible for fire safety on the premises?
Under the Regulatory Reform (Fire Safety) Order 2005, it’s the responsible person: often the employer, owner or occupier. Landlords, facilities managers and managing agents can also hold responsibility.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.
How do you keep the site clean during the work?
With sheeting and covers, before anything else happens. We keep the work contained and leave the area clean.
Fire damper testing for kitchens and businesses in Fulbrook
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we cannot get to, so you know where the gaps are. The work covers fusible link fire dampers, wall and floor dampers and hospitals and care homes, and people most often call us about motorised smoke dampers due for testing and dust or grease build-up on damper blades.
In a village or hamlet like Fulbrook, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Fulbrook (OX18)
- Region
- Oxfordshire
- Records
- Written report with photos
- Price
- A fixed price before work begins
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Checked
- 30 October 2026

Do you need fire damper testing in Fulbrook?
In most buildings, Fulbrook included, dampers are out of sight in ceiling voids, risers and service shafts. If there’s no hatch to reach them, they slip off everyone’s list, and anything nobody can get to goes untested.
Most sites get in touch after spotting one of these:
- Fire damper items raised by an assessor
- Dampers that stick or won’t close fully
- Fire dampers that haven’t been tested for over a year
- Rusted damper blades and springs
Site managers at schools such as Burford Primary School normally find the summer break the easiest time for ceiling work like damper testing.
What to look for in a quote
- If they look at the system before pricing
- When the next visit should be, and why
- Whether the work can be done while the site is closed
- Whether they’re fully insured
How it works
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. It takes anything from a couple of hours for a handful of dampers to a full day for a large building, and the area is cleaned down before we leave. For a village or hamlet like Fulbrook, tell us about narrow lanes, gates and parking when you book.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
How to prepare
- Tell us about site rules, permits or sign-in
- Make sure someone can let us in and lock up afterwards
- Clear loose items from the work area
Getting a quote
If you need fire damper testing in Fulbrook, call 0345 646 2711 or use the quote form. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. A fixed quote usually follows within one working day.
Advice
Places near Fulbrook
Other services in Fulbrook
What your team can do, and what needs us
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Between visits
No system stays clean for ever, but care slows the build-up. A few tips:
- Add new dampers to the register as they’re fitted
- Keep damper test reports with the fire safety log
- Don’t let hatches get painted shut or boarded over
- Act on failed dampers rather than leaving them on file
Tell other contractors where the dampers are, and ask them not to run cables through or wedge them. Anything they disturb should be checked again.
Deal with leaks and condensation near dampers quickly. Corrosion is a common reason blades stick.
Multi-site and managed buildings
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party and send the paperwork to whoever needs it.
Fire damper testing around Fulbrook
Food Standards Agency records list about 3 care, childcare and hospital premises and about 7 hotels, B&Bs and guest houses registered as food businesses across Fulbrook and its immediate surroundings (about a mile and a half). Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Fulbrook sits within the area of Oxfordshire Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
Minster Lovell Hall, about 4.2 miles east, is one of the historic houses near Fulbrook, and older buildings converted to new uses often have ventilation added later.
Fulbrook is about 4 miles north-west of Carterton, in Oxfordshire. Whether your site is in the middle of Fulbrook or further out, fire damper testing is available to all kinds of commercial premises, from a single unit to a large public building. Fulbrook is one of 443 towns, villages and districts in Oxfordshire where we work for commercial clients. Our Oxford page covers sites nearby (17 miles or so).
We cover every part of OX18 for fire damper testing and the streets around it. Streets in the area include Church Lane, Meadow Lane and Upper End, and we cover them all for fire damper testing. We also cover the places around Fulbrook: Burford (1 mile south-west), Little Barrington (3 miles west), Milton-under-Wychwood (3 miles north), Fifield (4 miles north) and Idbury (5 miles north). Further out, we also cover Witney (6 miles east), Carterton (4 miles south-east), Faringdon (11 miles south), Kidlington (15 miles east), Chipping Norton (9 miles north) and Woodstock (12 miles east).
Landmarks near Fulbrook
Locally, jobs take us to businesses close to The Cotswold Arms Inn and Burford School and the streets around them. The closest station to Fulbrook is Shipton station, about 3.8 miles north.
Leave it or put it right?
Your fire risk assessor or insurer may want evidence that dampers have been tested. Having a current report ready for a building in Fulbrook saves a scramble when the question comes. A planned visit to Fulbrook is easier to arrange than an emergency callout.
One small site or a whole estate, we price it on the same basis: what needs doing, how we get to it and when. You’ll have a fixed price before work begins.
Why us?
- Trading since 2009
- Fixed quotes from a survey or photos
- CHAS, SafeContractor and ISO 9001
- One contact for all your sites in London and the South East
Take a look at what affects the cost and how to check a contractor.
Part by part
Schools, hospitals and care homes
Hospitals and care homes stay occupied around the clock. We plan the order of work with the site team to keep disruption to a minimum.
Smoke dampers
If a smoke damper will not operate when signalled, it goes on the report as a failure, with a note of what we found.