Oxfordshire · Fire damper testing
Fire damper testing in Faringdon, Oxfordshire
For fire damper testing in Faringdon, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Dampers flagged on a fire risk assessment
- Fire dampers that fail to drop shut
- Dampers that can’t be reached without an access panel
Why act early in Faringdon
If a damper cannot close, the wall it sits in has a hole in it during a fire. The rest of the compartment can be built perfectly and still be bypassed by the duct. Testing now is how you find out before it matters. It’s better to plan the work at a site near Faringdon than wait for a failure.
Working hours, access and the scale of the site can all change the price. Each of those is built into the quote, and the price is fixed before any work starts.
Why us?
- Trading since 2009
- Every job surveyed first
- Full insurance on every job
- Fixed quotes from a survey or photos
See how cleaning jobs are priced or how to check a contractor.
How we handle fire damper testing in Faringdon
For every damper, we record where it is, whether it passed and the state it’s in. Dampers that pass are reset and left open, ready to operate, and any that fail are listed with the reason. You end up with a clear record to keep with your fire safety documents. If you are dealing with fire dampers with no recent test record and dirty dampers that may not close, we can put it right, from motorised smoke dampers, fusible link fire dampers and riser dampers onwards.
Around a place like Faringdon, dampers tend to be in schools, care homes, surgeries and hotels rather than big offices. The law on keeping them working does not change with the size of the place.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Location
- Faringdon (SN7)
- Wider area
- Oxfordshire
- Records
- Written report with pictures
- Quotes
- A fixed quote up front
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Fire damper testing in Faringdon: local notes
There are about 3 caring premises (care homes, nurseries and hospitals) on the FSA’s food hygiene register in Faringdon and the streets around it, up to about 1.5 miles out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. About less than half a mile north of Faringdon is Faringdon Day Hospital, the nearest hospital. Where patients or residents may need help to leave a building, working dampers matter all the more. Faringdon sits within the area of Oxfordshire Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
If you manage a school site such as Faringdon Community College, any fire dampers can be tested in the holidays. Faringdon Day Hospital, about within half a mile north of Faringdon, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests. Historic houses near Faringdon, with Buscot Park about 3 miles north-west, are a reminder that older buildings can hold dampers in unexpected places.
Faringdon is about 10 miles south-west of Witney, in Oxfordshire. Whether your site is in the middle of Faringdon or further out, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. Our Oxfordshire coverage runs to 443 places, and Faringdon is one of them. There’s also a page for Oxford, about 17 miles away.
Our technicians cover all of SN7 for fire damper testing and the streets around it. Local streets include Station Road, Marlborough Gardens and Marlborough Close, all of which we cover for fire damper testing. Faringdon is on the A417 and A4095, so it’s easy for us to get to for fire damper testing. Other places close to Faringdon include Little Coxwell (1 mile south), Fernham (2 miles south), Shellingford (2 miles south-east), Hatford (3 miles east) and Baulking (3 miles south-east). Further out, we also cover Didcot (15 miles east), Abingdon-on-Thames (13 miles east), Witney (10 miles north-east), Carterton (8 miles north), Wantage (8 miles south-east) and Grove (8 miles south-east).
What’s near Faringdon
In Faringdon, that means kitchens and buildings near Faringdon Infant School and The Swan pub. A little further out are Faringdon Day Hospital (within half a mile north) and Faringdon Castle (0.8 miles north-east). The countryside around Faringdon includes Badbury Hill.
Towns and villages near Faringdon
Other services in Faringdon
How we price fire damper testing
You will get a fixed price before work begins. It’s based on:
- The condition we find in the survey
- Travel, parking and unloading
- How big the system is
- Working hours and out-of-hours timing
What you pay reflects the actual work. That is why every job is surveyed first, and the price is agreed before we start.
Asking for a quote
To speed up the quote, send us:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- A few general shots of the system
- Problems your staff have spotted
- Close-ups of filters, grilles, hatches or access panels
Quotes are quick. Call or email with a few details and you’ll normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Questions from Faringdon
Do you work at weekends in Faringdon?
Yes, nights and weekends are routine for us. The site is handed back ready to open. When you phone us on 0345 646 2711 or drop us a line, mention when the site is quiet.
Can you get to a site in Faringdon?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
Whose job is it to make sure fire dampers are tested?
The duty falls on the responsible person for the premises. That is often the employer, owner, landlord, facilities manager or managing agent. Our part is the testing and the records that show it’s been done.
Are you insured?
Yes. We’re fully insured, and the details are available on request.
How much time does a damper test visit need?
It takes anything from a couple of hours for a handful of dampers to a full day for a large building. How easily we can reach the dampers makes the most difference, and we’ll give you an idea when we quote.
What does TR19 mean?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
Who is the responsible person?
In the words of the Fire Safety Order 2005, it’s the responsible person. It’s normally the employer, or whoever controls the building, and in shared buildings more than one person can have duties. If you’re not sure, check your lease and fire risk assessment.
How far ahead should we book?
Earlier is better, particularly for night and weekend visits. We normally quote within one working day, and emergencies are covered by our 24/7 line.
Managing agents and facilities teams in Faringdon
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we are happy to quote for all of it.
Records are where multi-site compliance often slips. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
What fire damper testing cannot fix
It’s worth knowing the limits before booking:
- Missing dampers that a designer needs to specify
- Sign-off of the whole building’s fire safety
- Holes around ductwork in fire-resisting walls
If you’re not sure, just ring 0345 646 2711, or send details by email and we’ll give you a straight answer before you book.
Parts of the system we cover
- Offices and schools
- Riser dampers
- Wall and floor dampers
- Motorised smoke dampers
- Fusible link fire dampers
- Hospitals and care homes
How the job changes from site to site
Offices and retail
In offices and retail units, dampers tend to be hidden above working areas. We can test in the evening, overnight or at weekends so the space stays open.
Smoke dampers
Testing smoke dampers sometimes needs input from whoever looks after the control system. We plan that with you before the visit.
How the visit works
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Visits to a place like Faringdon are planned ahead, so we arrive with what the survey says the job needs.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
Before we arrive
- Move anything stored near the system
- Have your last certificate or report to hand
- Make sure someone can let us in and lock up afterwards
Ask for a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Advice
Between visits
A little care between visits keeps the system in better shape. Our advice:
- Warn anyone working in ceiling voids about the dampers
- Keep damper test reports with the fire safety log
- Make sure access panels stay clear and usable
- Keep to at least yearly testing
Put the next test in the diary within twelve months. The guidance is at least once a year, so it helps to book it before the date slips.
Make sure every damper can be reached. Where there’s no hatch, an access panel makes testing possible before the next test.