Hampshire · Fire damper testing
Conford fire damper testing
Specialist fire damper testing for Conford: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Smoke dampers that need testing through their controls
- Fire dampers with no recent test record
- Dampers hidden with no access panel or hatch
How we handle fire damper testing in Conford
A drop test is simple in principle: we release the blade, watch it close fully, then reset it. We test dampers for sites in Conford and the rest of Hampshire, keeping a log for each damper so there’s a history to look back on. The work covers fusible link fire dampers, motorised smoke dampers and offices and schools, and common reasons people get in touch are fire dampers nobody can get to and dampers that stick or won’t close fully.
Somewhere as small as Conford, fire dampers are typically found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
Duct Doctor has been trading since 2009, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Place
- Conford (GU30)
- Region
- Hampshire
- Reporting
- Report and pictures after the visit
- Quote
- A fixed quote up front
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Fixed quotes for fire damper testing in Conford
A fixed price needs a few facts first. We check:
- The number of sites or systems
- A single visit or a regular plan
- The size of the system
- The condition we find in the survey
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will explain each part.
What we need to know
Photos and a few facts are often enough to price the work. Send what you can of the following:
- Problems your staff have spotted
- Your last certificate, test record or report
- Your opening hours and when the area is out of use
- Any access panels or hatches you can see
Quotes are quick. Call or email with a few details and you’ll normally have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Why act early in Conford
Putting testing off does not change whether the dampers will close; it just means you don’t know. The guidance from BESA is at least once a year, so a missed year leaves a gap in the record too. If the system at a site near Conford fails, there may be nowhere nearby to move to.
The price reflects the work, not guesswork. That’s why every job is surveyed first, and the price is agreed before we start.
Why book with us
- A written report with photos after every visit
- Fully insured
- A fixed price before any work starts
- Accredited under CHAS and SafeContractor, with ISO 9001
See how cleaning jobs are priced or how to check a contractor.
What we’re called out for in Conford
Fusible links and springs do not last for ever. Damaged or painted links and weak springs mean the blade may stop short, and that only becomes clear during a drop test.
What we’re most often called out for:
- Blades that jam part-way when released
- Fire dampers nobody can get to
- Rusted damper blades and springs
- Dampers clogged with dust or grease
For schools like Liphook Infant School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Before booking anyone
- How areas they can’t reach will be recorded
- Whether the whole system is included, or only the parts that are easy to reach
- Whether the work can be done while the site is closed
- Whether the quote shows VAT
Different parts, different methods
Access panels
Testing depends on getting to the damper. That typically means an access panel in the duct, plus a way through the ceiling or wall.
Schools, hospitals and care homes
Where residents can’t easily get out, holding fire and smoke back matters even more. Annual damper testing is part of keeping that in place.
Fire damper testing in Conford: local notes
About 42 miles out from central London, Conford is part of the South East area we work across. Evening, overnight and weekend visits are all possible. For Conford, the closest hospital is Chase Community Hospital, roughly 1.9 miles north-west. Where patients or residents may need help to leave a building, working dampers matter all the more.
Healthcare buildings such as Chase Community Hospital (about 1.9 miles north-west) rely on fire compartments, and the dampers in them need testing at least annually.
Conford is about 2 miles south-east of Bordon, in Hampshire. Sites in Conford get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. 683 places in Hampshire are on our list, large and small. There’s also a page for Guildford, about 15 miles away.
Work in GU30 follows the same survey, fixed quote and written report as everywhere else we cover. Neighbouring places we cover for fire damper testing include Passfield (1 mile north-west), Weavers Down (1 mile south), Liphook (1 mile south-east), Longmoor (2 miles south-west) and Woolmer (2 miles west). Further out, we also cover Farnborough (14 miles north), Fleet (13 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (8 miles north-west) and Petersfield (8 miles south-west).
Around Conford
We work in commercial kitchens and buildings around Bohunt School and the streets around them. The closest station to Conford is Liphook station, roughly 1.8 miles south-east. Other landmarks nearby include Chase Community Hospital (1.9 miles north-west). Green spaces nearby include Wheeler's Down and Deadwater Valley.
What we do, step by step
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the work takes a couple of hours for a few dampers, and a day or more across a big site. If the van will struggle with a lane or gateway near Conford, let us know and we will plan around it.
- We go through the damper schedule and any previous faults.
- Each damper is found and checked for access.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- We report the results and offer remedials on failed dampers.
Before we arrive
- Let us know when the site is closed or quiet
- Arrange a key holder or contact on site
- Make sure equipment near the work can be switched off and left to cool
Get a fixed quote
For fire damper testing in Conford, call us on 0345 646 2711 or use the quote form. Let us know the site type and the opening hours, and send pictures or your last report if you can. We normally send a fixed quote within one working day.
Advice
Questions from Conford
Do you work at weekends in Conford?
Yes, we can come after you close and finish before you open. It means the site in Conford keeps running as normal. Tell us your opening hours when you ask for a quote.
Will you come out to Conford?
Yes, we work in villages as well as towns, and Conford is covered. The journey is planned ahead, so a few details about the route help.
What happens if you can’t reach some of it?
We record them on the report, with a note of where it is, and we explain what access is needed, such as extra access panels in ductwork.
Is TR19 cleaning required by law?
No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and many insurers can refuse or reduce a claim without proof of cleaning.
Who is the responsible person?
In the words of the Fire Safety Order 2005, it’s the responsible person. That’s generally the employer or the person in control of the premises, and in shared buildings more than one person can have duties. If you’re not sure, check your lease and fire risk assessment.
How do you deal with dampers that cannot be reached?
It goes on the report as inaccessible, with the reason. We can fit an access panel so it’s tested on the next visit.
Whose job is it to make sure fire dampers are tested?
The duty falls on the responsible person for the premises. Depending on the building, that can be the employer, owner, landlord or whoever manages it. We carry out the testing and give them the records.
What if a fire damper won’t close?
The failure goes on the report, along with what caused it, such as a sticking blade, corrosion or a damaged link. Remedials are offered, either a repair or a replacement damper, and test it again afterwards.
Aftercare tips
So the system stays in good health:
- Keep damper test reports with the fire safety log
- Warn anyone working in ceiling voids about the dampers
- Act on failed dampers rather than leaving them on file
- Fix water leaks in plant rooms and risers promptly
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Outstanding faults should be dealt with, not left on file.
The simplest way to avoid failures is to test on time, every year. A blade that is just starting to stick is easier to deal with than a seized one.
For landlords and multi-site operators
Facilities teams in offices, schools and healthcare sites book us too across Hampshire. Work can be phased by floor, building or site to keep disruption down.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.