Hampshire · Fire damper testing
Fire damper inspection in Blackmoor
Fire damper testing across Blackmoor and nearby, booked around your opening hours and signed off in writing with pictures.
- Dampers affected by leaks or condensation
- Dirty dampers that may not close
- Gaps in the fire damper test log
How we handle fire damper testing in Blackmoor
Testing finds the dampers that won’t close. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper, so the fault doesn’t just sit on a list. The work covers motorised smoke dampers, offices and schools and fusible link fire dampers, and common reasons people get in touch are fire dampers that haven’t been tested for over a year and dampers that stick or won’t close fully.
Somewhere as small as Blackmoor, fire dampers are typically found in a school, a care home, a hotel or a converted building, wherever there is one. Wherever there are dampers, each one needs testing at least annually.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Place
- Blackmoor (GU33)
- Region
- Hampshire
- Paperwork
- Photo report after each visit
- Price
- A fixed price before work begins
- Hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Managing agents and facilities teams in Blackmoor
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.
What else we do in Blackmoor
How we price fire damper testing
The survey tells us what the work involves. We look at:
- Whether several sites go on one quote
- Whether we need access equipment or extra panels
- Working hours and out-of-hours timing
- Travel, parking and unloading
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
Helping us quote
There’s no need for technical detail. Just send:
- Your opening hours and when the area is out of use
- How we’d reach plant on a roof or in a plant room
- Detail shots of panels, filters and grilles
- The postcode and the type of business
There’s no standard price list, because no two systems are the same. We look at your system first, from pictures or on a visit, then send a fixed quote. To get going, ring 0345 646 2711 or send us an email.
Do you need fire damper testing in Blackmoor?
Links and springs age like any other part. A link can be damaged, painted over or swapped for the wrong one, and a tired spring may not drive the blade home, and that only becomes clear during a drop test.
If you notice any of these, it’s worth a diagnosis:
- Dust or grease build-up on damper blades
- Dampers that stick or won’t close fully
- Fire dampers that haven’t been tested for over a year
- Buildings with no damper register
School buildings such as St Matthew's Church of England Aided Primary School are normally tested in the holidays, wherever they have dampers.
Before booking anyone
- When they can work, and whether that is outside your opening hours
- Whether a survey comes first
- Proof of accreditation you can verify
- What records you will receive afterwards
Your questions about fire damper testing in Blackmoor
Can you come to Blackmoor after we close?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Blackmoor needn’t be disturbed. Let us know the hours you are closed and we will book within them.
Which fire authority looks after Blackmoor?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Blackmoor. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
How do you deal with dampers that cannot be reached?
We do not leave it off the report; we note it as not reached. With an access panel fitted, it can be tested on a return visit.
Whose job is it to make sure fire dampers are tested?
The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Annual testing by a competent person, with written records, is a practical way to show the duty is being met.
Do you work with multi-site operators?
Yes. Tell us the addresses and what each needs and we will quote them together.
Do you cover Blackmoor?
Yes. We work across Greater London, Surrey, Kent, Sussex, Hampshire, the Isle of Wight, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, Blackmoor included.
Do you offer maintenance contracts?
Yes. Tell us what you have and how it’s used, and we will suggest a schedule and quote for it.
What should I send you?
Where the site is, what it is and when it’s open, plus photos of the system and your last certificate or report if you have one.
What fire damper testing looks like in Blackmoor
Food Standards Agency data includes about 3 caring premises (care homes, nurseries and hospitals) within 1.5 miles or so of the middle of Blackmoor. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. For Blackmoor, the closest hospital is Chase Community Hospital, roughly 1.4 miles north-east. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have. Hampshire and Isle of Wight Fire and Rescue Service covers Blackmoor. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Healthcare buildings such as Chase Community Hospital (about 1.4 miles north-east) rely on fire compartments, and the dampers in them need testing at least annually.
Blackmoor is about 5 miles south-east of Alton, in Hampshire. Whatever kind of site you run in Blackmoor, fire damper testing is something we can help with. We can work out of hours so trading is not interrupted. Our Hampshire coverage runs to 683 places, Blackmoor among them. For sites nearby, see our Guildford page, about 17 miles away.
Work in GU33 follows the same survey, fixed quote and written report as everywhere else we cover. We cover sites on Blackmoor Road and Sotherington Lane and the roads around them. We also cover the places around Blackmoor: Woolmer (1 mile south-east), Greatham (1 mile south), Longmoor (2 miles south-east), Passfield (2 miles east) and Weavers Down (3 miles south-east). Within a short drive, we also cover Basingstoke (15 miles north-west), Farnborough (15 miles north), Fleet (13 miles north), Horndean (14 miles south-west), Aldershot (12 miles north-east) and Alton (5 miles north-west).
Landmarks near Blackmoor
Locally, jobs take us to businesses close to Mill Chase Academy, among other places. The closest station to Blackmoor is Liss station, about 3.5 miles south of the centre. Nearby you’ll also find The Romany Museum (2.3 miles west) and Chase Community Hospital (1.4 miles north-east). Not far away are Selborne Hill and Deadwater Valley.
The process
A visit follows the same order every time: protect the area, make the system safe, carry out the fire damper testing, tidy up and leave you the report. The visit itself takes from an hour or two in a small building to several visits on a large estate. A few pictures of the system help us make the most of a visit to a place like Blackmoor.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- Panels and tiles go back, and the results are written up.
Before we arrive
- Tell us where we can park and unload
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Dig out any earlier paperwork for the system
How to get a quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Read more
Why act early in Blackmoor
Your fire risk assessor or insurer may want evidence that dampers have been tested. Having a current report ready for a building in Blackmoor saves a scramble when the question comes. It’s simpler to plan the work at Blackmoor now than to arrange it in a hurry later.
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before any work starts.
Why Blackmoor businesses choose us
- A single point of contact for sites across the South East and London
- A fixed price before any work starts
- CHAS, SafeContractor and ISO 9001
- Ventilation hygiene specialists since 2009
Take a look at our cost guide or our accreditations.
What staff can safely do
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, which is where we come in.
Looking after it afterwards
Looking after the system between visits is straightforward, and it helps at the next visit:
- Warn anyone working in ceiling voids about the dampers
- Book the next test before the year runs out
- Get remedials done soon after a failed test
- Keep an eye out for damp around dampers
Failed dampers are set out separately, each with the fault we found, along with an offer to repair or replace them. Once the work is done, the damper is tested again and the record updated.
The simplest way to avoid failures is to test on time, every year. A blade that’s just starting to stick is easier to deal with than a seized one.