Hampshire · Fire damper testing
Fire Damper Testing in Woolmer
Fire damper testing for commercial sites in Woolmer and across Hampshire. CHAS, SafeContractor and ISO 9001, and fully insured.
- Fire damper items raised by an assessor
- Dampers that stick or will not close fully
- Fire dampers that haven’t been tested for over a year
Fire damper testing for kitchens and businesses in Woolmer
Testing finds the dampers that won’t close. When one sticks, has a damaged link or is corroded, we report it and offer remedials, so the fault doesn’t just sit on a list. If you have dampers clogged with dust or grease and dampers that stick or won’t close fully, we can help, from hospitals and care homes, fusible link fire dampers and wall and floor dampers onwards.
Testing in a small place like Woolmer is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
Duct Doctor has been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Place
- Woolmer (GU33)
- Wider area
- Hampshire
- Reporting
- Written report with pictures
- Price
- A fixed price before any work starts
- Working hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Woolmer: your questions answered
Which fire service covers Woolmer?
Woolmer is in the area of Hampshire and Isle of Wight Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Can you work in Woolmer outside opening hours?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Just ring 0345 646 2711 or drop us a line with your opening times and we will plan around them.
What does TR19 mean?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
How do you deal with dampers that can’t be reached?
Any damper we can’t reach is listed on the report so nothing is quietly missed. Fitting an access panel is the usual fix, and we can quote to fit one.
Do you carry out smoke damper testing?
Yes, as well as drop testing fire dampers. Smoke and fire dampers are reported together, so you have one record.
What happens if a damper fails its test?
Failed dampers are reported and we can quote to repair or replace them. Once fixed, the damper is drop tested again and the record updated.
Do you certify fire dampers?
After testing, we provide a report covering each damper, with its location, its result and any faults. It belongs in your fire safety log.
How often should fire dampers be tested?
The guidance from BESA is at least annually, by a competent person. A test on completion of installation comes first.
Do you need fire damper testing in Woolmer?
Corrosion is another common cause of failure. Condensation, leaks and damp plant rooms corrode the parts that need to move, so a damper can seize without anyone noticing.
It’s time to book a visit if you see:
- Dampers that cannot be reached without an access panel
- Dampers affected by leaks or condensation
- Gaps in the fire damper test log
- Fire damper items raised by an assessor
A school like St Matthew's Church of England Aided Primary School can have any dampers tested over half-term without disturbing lessons.
Questions to ask before you book
- What paperwork you get at the end
- Whether the work can be done while the site is closed
- Whether a survey comes first
- If the quote is a fixed price or an estimate
Why it’s worth doing now in Woolmer
Your fire risk assessor or insurer may want evidence that dampers have been tested. Having a current report ready for a building in Woolmer saves a scramble when the question comes. Planning a trip to Woolmer ahead is easier for everyone than a rushed one.
Combining work into one visit or one programme often makes better use of the time. Tell us about everything you’d like looked at and we will price it together.
Why Woolmer businesses choose us
- Fixed quotes, typically within one working day
- A single point of contact for sites across the South East and London
- CHAS and SafeContractor accredited, with ISO 9001
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
What happens on the day
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. The work on site takes anything from a couple of hours for a handful of dampers to a full day for a large building, and the area is cleaned down before we leave. If the van will struggle with a lane or gateway near Woolmer, let us know and we will plan around it.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we can’t reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Before we arrive
- Find the previous report, if there is one
- Let us know how we reach the system, including roofs, risers and plant rooms
- Clear loose items from the work area
How to get a quote
Quotes are quick. Call or email with a few details and you will typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
Aftercare tips
How long the results last depends on use and care. Here’s what we suggest:
- Tell contractors where dampers are before they start work
- Never wedge or tie a damper open
- Keep ceiling hatches and duct panels easy to open
- Keep an eye out for damp around dampers
Make sure trades working in ceilings and risers know where the dampers sit, and that they mustn’t tie, wedge or obstruct them. Anything they disturb should be checked again.
Keep a damper register: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
What fire damper testing looks like in Woolmer
Food Standards Agency data includes about 3 care, childcare and hospital premises within 1.5 miles or so of the middle of Woolmer. If any of them has ducted ventilation, its dampers need an annual drop test at least. Woolmer’s nearest hospital, Chase Community Hospital, is about 1.7 miles north-east. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have. Hampshire and Isle of Wight Fire and Rescue Service covers Woolmer. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
The nearest hospital, Chase Community Hospital, is about 1.7 miles north-east; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly.
Woolmer is about 2 miles south of Bordon, in Hampshire. Wherever you are in the GU33 postcode area, we can take on fire damper testing. Our area takes in 683 places across Hampshire, from busy centres to quieter spots. There’s also a page for Guildford, roughly 17 miles from Woolmer.
All of GU33 is within our area for fire damper testing, from the main roads to the quietest streets. Fire damper testing is available to premises on Benhams Lane and Petersfield Road and the roads around them. Other places close to Woolmer include Greatham (1 mile south), Blackmoor (1 mile north-west), Longmoor (1 mile south-east), Weavers Down (2 miles east) and Liss Forest (2 miles south). Further out, we also cover Farnborough (15 miles north), Fleet (13 miles north), Horndean (13 miles south-west), Aldershot (12 miles north-east), Alton (6 miles north-west) and Waterlooville (15 miles south-west).
What’s near Woolmer
In Woolmer, that means kitchens and buildings near Mill Chase Academy and the streets around them. Woolmer’s nearest station is Liss station, about 2.8 miles south of the centre. Nearby you’ll also find Chase Community Hospital (1.7 miles north-east) and The Romany Museum (2.8 miles west). Open spaces near Woolmer include Deadwater Valley and Selborne Hill.
Also near Woolmer
Also in Woolmer
How the job changes from site to site
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. We note any rust or water damage on the report so it can be dealt with.
Schools, hospitals and care homes
Where residents can’t easily get out, holding fire and smoke back matters even more. Annual damper testing is part of keeping that in place.
What fire damper testing can’t fix
Some problems need a different service or another trade:
- Faults in the alarm or building controls that signal smoke dampers
- Ductwork crossing a fire wall with no damper fitted
- Signing off a building’s overall fire safety
If in doubt, call 0345 646 2711, or email photos and we will say what we think.
What the work covers
- Wall and floor dampers
- Offices and schools
- Riser dampers
- Motorised smoke dampers
- Hospitals and care homes
- Fusible link fire dampers