West Sussex · Fire damper testing
Coneyhurst fire damper testing
Fire damper drop testing and smoke damper testing, with a record for each damper in Coneyhurst, surveyed first and signed off with a written report and photos. Ask us for a fixed quote.
- Dampers hidden with no access panel or hatch
- Dust or grease build-up on damper blades
- Dampers overdue for their annual drop test
Fire damper testing in Coneyhurst: local notes
Coneyhurst is about 37 miles from central London, well within the area we cover across London and the South East. The visit is fixed around your opening hours, not ours. The fire and rescue service for Coneyhurst is West Sussex Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
A school like The Weald School can have any dampers tested over half-term without disturbing lessons. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Old Place Manor is about 4.8 miles south-west), finding every damper is the first job.
Coneyhurst is about 6 miles south-west of Horsham, in West Sussex. Sites in Coneyhurst get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where needed and a written report with pictures. 371 places in West Sussex are on our list, large and small. Our Brighton page covers sites nearby (18 miles or so).
Fire damper testing in RH14 is surveyed, quoted and booked the same way as anywhere else. Other places close to Coneyhurst include Billingshurst (2 miles north-west), Five Oaks (3 miles north), Newpound Common (3 miles north-west), The Haven (4 miles north) and Slinfold (5 miles north). Larger places within reach include Crawley (13 miles north-east), Horsham (6 miles north-east), Worthing (13 miles south), Haywards Heath (14 miles east), Burgess Hill (13 miles east) and Littlehampton (14 miles south).
Local landmarks in Coneyhurst
The nearest railway station is Billingshurst station, about 1.2 miles north-west. Other landmarks nearby include Christs Hospital School Museum (3.9 miles north-east). Open spaces near Coneyhurst include Knepp Wildland.
Fire damper testing in Coneyhurst, done properly
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we can’t get to, so you know where the gaps are. Typical jobs include motorised smoke dampers due for testing and damper actions from a fire risk assessment, on offices and schools, hospitals and care homes and wall and floor dampers.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Place
- Coneyhurst (RH14)
- Region
- West Sussex
- Reporting
- Written report with pictures
- Price
- Fixed quote, usually within a working day
- Working hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Landlords, agents and facilities managers
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
From a single site to a large estate, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with photos.
When something else is needed
We’ll always give you a straight diagnosis, so here’s what fire damper testing will not do:
- Signing off a building’s overall fire safety
- Missing dampers that a designer needs to specify
- Fire alarm or control system faults behind a smoke damper
If in doubt, give us a ring on 0345 646 2711 or drop us a line and we will say what we think before booking.
What the work covers
- Hospitals and care homes
- Offices and schools
- Wall and floor dampers
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers
What affects the cost of fire damper testing
We do not publish a price list, because sites vary so much. What we look at:
- Site requirements such as sign-in and permits
- Whether we need access equipment or extra panels
- Travel, parking and unloading
- The size of the system
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered, and you’ll get one fixed quote.
Helping us quote
Before you ask for a quote, gather:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Your last certificate, test record or report
- Photos showing the whole system and its surroundings
- Problems your staff have spotted
There’s no standard price list, because no two systems are the same. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, give us a ring on 0345 646 2711 or drop us a line.
How the visit works
Everything the job needs comes with us, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. The visit takes anything from a couple of hours for a handful of dampers to a full day for a large building. Rural roads and tight entrances are worth telling us about before a visit to Coneyhurst.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
How to prepare
- Mention any locked doors, roof access or ceiling voids
- Have your last certificate or report to hand
- Name a contact who can let us in at the agreed time
Get a fixed quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Read more
How the job changes from site to site
Fusible link fire dampers
A damaged or painted link can stop a damper doing its job. Each link is looked at as part of the test and note anything that is not right.
Ceiling voids and risers
Where ductwork runs up through a building, there are often dampers at every floor. We work through them floor by floor so nothing is missed.
Questions from Coneyhurst
Do you work in villages like Coneyhurst?
Yes. Coneyhurst is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Which fire and rescue service is responsible for Coneyhurst?
It’s West Sussex Fire and Rescue Service, which covers Coneyhurst. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before work begins, and waste is contained as we go. Before we leave, we tidy up and clean down.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
How much notice should we give?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and if it’s an emergency, call us any time.
Who is the responsible person?
That depends on who controls the premises. Under the Fire Safety Order 2005, it’s the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.
What is TR19?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not legislation, but it’s the standard people check against.
Can you fix fire dampers that fail?
The failure goes on the report, along with what caused it, whether that is a stuck blade, rust or a damaged link. Remedials are offered, either a repair or a replacement damper, and it’s tested again once the work is done.
Nearby places to Coneyhurst
Also in Coneyhurst
Staff cleaning versus specialist work
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Staff cleaning does not replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
What happens if it’s left?
An untested damper is an unknown. Testing turns it into a known pass or a known fault, with remedials offered for anything that fails, and that’s something you can plan around. It’s simpler to plan the work at Coneyhurst now than to arrange it in a hurry later.
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. You’ll have a fixed price before any work starts.
Why us?
- Fixed quotes, usually within one working day
- CHAS, SafeContractor and ISO 9001
- One number for every site across the South East and London
- Evenings, overnight and weekends, plus 24/7 emergency callout
Read our cost guide or how to check a contractor.