West Sussex · Fire damper testing
Fire damper testing in Burgess Hill, West Sussex
Specialist fire damper testing for Burgess Hill: diagnosis first, then a fixed quote, the work and a report with pictures. Call for a fixed quote.
- Gaps in the fire damper test log
- Fire dampers nobody can get to
- Fire damper items raised by an assessor
About our fire damper testing in Burgess Hill
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, while failures are flagged with what we found. You end up with a clear record to keep with your fire safety documents. We’re often asked to deal with fire damper items raised by an assessor and dampers that can’t be reached without an access panel, across fusible link fire dampers, motorised smoke dampers and wall and floor dampers.
Many building managers in towns like Burgess Hill find out about their dampers through a fire risk assessment. The first visit normally means finding each damper and recording how to reach it.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Where
- Burgess Hill (RH15)
- Wider area
- West Sussex
- Records
- Written report with pictures
- Price
- A fixed price before work begins
- Hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Common problems we fix in Burgess Hill
Rust is a frequent reason a damper will not close. Water leaks, condensation and damp plant areas attack the casing, blade and spring, and the damper can seize quietly where no one sees it.
These are the problems we see most often:
- Dampers affected by leaks or condensation
- Fire dampers that haven’t been tested for over a year
- Motorised smoke dampers due for testing
- Dust or grease build-up on damper blades
Hospitals such as The Dene Hospital, about 1.7 miles west, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Burgess Hill, the same annual testing applies.
Questions to ask before you book
- If they look at the system before pricing
- Exactly which parts of the system are covered
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- If the quote is a fixed price or an estimate
How we price fire damper testing
The diagnosis comes before the price. The main factors are:
- Site rules, permits and inductions
- How many systems or sites are involved
- The condition of the system
- How big the system is
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before any work starts.
Helping us quote
Photos let us diagnose from a distance. The most useful are:
- Where the site is and what kind of site it is
- Any previous report or certificate
- Your opening hours and when the area is out of use
- Any access panels or hatches you can see
To get a fixed quote, phone us on 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. You will typically have a quote within one working day.
Nearby places to Burgess Hill
Other services in Burgess Hill
What we do, step by step
Your staff do not need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Before we leave, the area is tidied and the paperwork follows. Photos taken on a phone are usually enough for us to plan a job in Burgess Hill and give a fixed quote.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
How to prepare
- Mention any locked doors, roof access or ceiling voids
- Name a contact who can let us in at the agreed time
- Tell us the best time to work, such as after service or at a weekend
Ask for a quote
For fire damper testing in Burgess Hill, ring 0345 646 2711 or drop us a line. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. We usually send a fixed quote within one working day.
Advice
In-house cleaning or a specialist?
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That’s our job.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
Burgess Hill: your questions answered
Which fire and rescue service is responsible for Burgess Hill?
That is West Sussex Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Can the work in Burgess Hill be done at night or at weekends?
Yes. We work evenings, overnight and at weekends. The work in Burgess Hill can fit around your hours. Your opening times are the first thing we ask for.
What accreditations do you have?
Our accreditations are CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Is a quote from photos possible?
Yes, if we can see what we need. If not, a site survey comes first, then a fixed quote.
Where does the waste go?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. We don’t leave it behind.
Who is responsible for fire damper testing?
It sits with the building’s responsible person. That is often the employer, owner, landlord, facilities manager or managing agent. We carry out the testing and give them the records.
What happens to dampers you can’t get to?
We don’t leave it off the report; we note it as not reached. Once there’s a panel or a way through the ceiling, it can be tested.
What’s TR19?
BESA’s ventilation hygiene specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t law, but it’s the benchmark.
Why deal with it now?
Fire risk assessors and insurers may ask to see damper test records. Having a current report ready for a building in Burgess Hill saves a scramble when the question comes. The sooner the work is done, the simpler the job for a site in Burgess Hill.
You won’t find a price list here, because the cost depends on the site in front of us. Call for a fixed quote, and we will explain what it covers.
What you get with us
- Evenings, overnight and weekends, plus 24/7 emergency callout
- A written report with photos after each visit
- One contact for all your sites in London and the South East
- Trading since 2009
Read our cost guide or how to check a contractor.
What fire damper testing looks like in Burgess Hill
The FSA’s food hygiene register lists about 5 schools, colleges and universities and about 26 hospitals, care homes and childcare premises with registered kitchens or food service in Burgess Hill and the streets around it, up to about 1.5 miles out. If any of them has ducted ventilation, its dampers need an annual drop test at least. Burgess Hill’s nearest hospital, The Dene Hospital, is about 1.7 miles west. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have. Burgess Hill is covered by West Sussex Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
Wherever there are offices above shops, near Burgess Hill station or elsewhere in Burgess Hill, ductwork may cross fire-resisting floors, and any dampers need testing. A school like St Wilfrid's Catholic Primary School can have any dampers tested over half-term without disturbing lessons.
Burgess Hill is about 9 miles north of Brighton, in West Sussex. Every kind of commercial site in Burgess Hill, fire damper testing is something we can help with. Visits can be booked for evenings, overnight or weekends so the site keeps running. Burgess Hill is one of 371 towns, villages and districts in West Sussex we cover for fire damper testing. You can also see our page for Brighton, roughly 9 miles from Burgess Hill.
All of RH15 is within our area for fire damper testing, from busy streets to back roads. We cover sites on Church Road, Station Road and Lower Church Road and nearby roads. Burgess Hill sits on or near the A273 and B2036, which makes travel easy for evening and night visits. If your site is just outside Burgess Hill, we cover Jacob's Post (1 mile west), World's End (1 mile north-east), Abbotsford (1 mile north-west), Goddards Green (2 miles west) and Hurst Wickham (2 miles south-west). Within a short drive, we also cover Crawley (11 miles north), Horsham (11 miles north-west), Worthing (15 miles south-west), Haywards Heath (3 miles north-east), East Grinstead (13 miles north-east) and Shoreham-by-Sea (10 miles south-west). Burgess Hill is one of the larger places we cover in West Sussex for fire damper testing.
Near you in Burgess Hill
Around Burgess Hill, our work takes us to kitchens and buildings near Burgess Hill Girls, Oakmeeds Community College and The Six Gold Martlets pub and the streets around them. Burgess Hill has its own railway station: Burgess Hill station. Nearby you will also find Burgess Hill Museum (within half a mile south-west) and Clayton Castle (3.4 miles south). For a walk, there’s Bedelands Farm Nature Reserve and Wolstonbury Hill.
Managing agents and facilities teams in Burgess Hill
Whether it’s one building or many, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with pictures.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Looking after it afterwards
Here’s the after-treatment advice, short and simple:
- Add new dampers to the register as they’re fitted
- Keep to at least yearly testing
- Do not let anything obstruct a damper’s blade
- Fix water leaks in plant rooms and risers promptly
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Outstanding faults should be dealt with, not left on file.
A simple register of every damper helps a great deal: location, type, last test date and result. It stops dampers getting lost as the building changes.