Oxfordshire · Fire damper testing

Clifton fire damper testing

We cover Clifton for fire damper drop testing and smoke damper testing, with a record for each damper. Fixed quotes, work around your opening hours and photo reports as standard.

  • Dampers that can’t be reached without an access panel
  • Dampers overdue for their annual drop test
  • Blades that jam part-way when released

Need fire damper testing in Clifton?

Fire damper testing in Clifton

Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. The work covers wall and floor dampers, motorised smoke dampers and offices and schools, and the jobs we see most are fire dampers that haven’t been tested for over a year and dampers affected by leaks or condensation.

Testing in a small place like Clifton is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.

We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.

Inside an extract duct: heavy deposits on the left, cleaned metal on the right
Location
Clifton (OX15)
Region
Oxfordshire
Reporting
Written report with photos
Price
Fixed quote, usually within a working day
Hours
Out of hours as standard, 24/7 emergency line
Telephone
0345 646 2711
Checked
30 October 2026

How the job changes from site to site

Fusible link fire dampers

The link has to be in good order for the damper to work. We check its condition during the test and note anything that isn’t right.

Schools, hospitals and care homes

Hospitals and care homes stay occupied around the clock. We plan the order of work with the site team to keep disruption to a minimum.

How it works

We start by comparing what we find with the survey or your pictures. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a morning or an afternoon for a small number of dampers, longer where there are many. Visits to a village like Clifton are booked in advance, at a time that suits whoever runs the site.

  1. First we check the schedule and the last set of results.
  2. Each damper is found and checked for access.
  3. We test fire dampers by dropping them and smoke dampers by operating them through the controls.
  4. Dampers that pass are reset, and failures are logged with what we found.
  5. We report the results and offer remedials on failed dampers.

Preparing for the visit

  • Let us know when the site is closed or quiet
  • Mention any sign-in, permit or induction we need
  • Name a contact who can let us in at the agreed time

How to get a quote

Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.

Get a price

Advice

Common questions in Clifton

Do you work at weekends in Clifton?

Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Your opening times are the first thing we ask for.

Do you work in villages like Clifton?

Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.

Who is the responsible person?

The law calls them the responsible person. It’s normally the employer, or whoever controls the building, and in shared buildings more than one person can have duties. Your lease and fire risk assessment should make it clear.

Can you fix fire dampers that fail?

The failure goes on the report, along with what caused it, such as a sticking blade, corrosion or a damaged link. We offer remedials to repair or replace it, and it’s tested again once the work is done.

Can you test motorised smoke dampers?

Yes, as well as drop testing fire dampers. Smoke and fire dampers are reported together, with any faults set out clearly.

Will we have to shut during the visit?

Not typically. Visits are timed for when the area is closed, such as overnight or at a weekend, so you keep your normal hours.

Does the law say we must follow TR19?

No, not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurance policies ask for proof of TR19® cleaning. The legal duty sits in the Regulatory Reform (Fire Safety) Order 2005, which applies in England and Wales.

Can one contract cover all our sites?

Yes. One number covers all your sites in our area, and visits can be set on a regular cycle.

Why deal with it now?

When something goes wrong, people ask what checks were in place. Damper test records are part of that answer, and they only exist if the testing happened. If the system at a site near Clifton fails, there may be nowhere nearby to move to.

One small site or a whole estate, we price it on the same basis: the work involved, the access and the timing. The price is fixed before any work starts.

Why us?

  • In business since 2009
  • Photo reports with every job
  • One contact for all your sites in London and the South East
  • Work around your opening hours, with 24/7 emergency cover

Read how cleaning jobs are priced or our accreditations and certificates.

Clifton buildings and fire safety

Clifton sits within the area of Oxfordshire Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up. Horton General Hospital is the nearest hospital, about 5.3 miles north of Clifton. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.

Healthcare buildings such as Horton General Hospital (about 5.3 miles north) rely on fire compartments, and the dampers in them need testing at least annually.

Clifton is about 6 miles south-east of Banbury, in Oxfordshire. Whether your site is in the middle of Clifton or further out, fire damper testing is available to all kinds of commercial premises, from a single unit to a large public building. Our Oxfordshire coverage runs to 443 places, Clifton among them. For sites nearby, see our Oxford page (16 miles or so).

Fire damper testing in OX15 is surveyed, quoted and booked the same way as anywhere else. You’ll find streets such as County View, Tithe Lane and Clifton Road, all of which we cover for fire damper testing. We also cover Somerton (2 miles south), Souldern (2 miles east), Fritwell (3 miles south-east) and Upper Heyford (4 miles south). Larger places within reach include Banbury (6 miles north-west), Bicester (8 miles south-east), Kidlington (11 miles south), Bure Park (8 miles south-east), Chipping Norton (11 miles west) and Headington (15 miles south).

Landmarks near Clifton

Locally, jobs take us to businesses close to Duke Of Cumberlands Head Public House. The closest station to Clifton is Kings Sutton station, roughly 2.7 miles north of the centre. Well-known places in the area include Horton General Hospital (5.3 miles north) and Deddington Castle (1.1 miles west).

Map of Clifton © OpenStreetMap contributors

Between visits

Results last longer with the right care. We suggest:

  • Keep an eye out for damp around dampers
  • Book the next test before the year runs out
  • Keep the damper register up to date after any building work
  • Get remedials done soon after a failed test

Make sure trades working in ceilings and risers know where the dampers sit, and that they mustn’t tie, wedge or obstruct them. If a damper has been disturbed, have it tested again.

Water is a damper’s enemy, so fix leaks and condensation near them promptly. Corrosion is a common reason blades stick.

When to call us in Clifton

In most buildings, Clifton included, dampers are out of sight in ceiling voids, risers and service shafts. Without an access panel nearby, they’re easy to forget, and one that cannot be reached can’t be tested.

What we’re most often called out for:

  • Buildings with no damper register
  • Fire damper items raised by an assessor
  • Fire dampers that haven’t been tested for over a year
  • Fire dampers that fail to drop shut

Around Clifton, as anywhere, each damper is released, checked, reset and recorded.

What your quote should include

  • How they set the interval to the next visit
  • Whether the work can be done while the site is closed
  • If the quote is a fixed price or an estimate
  • What insurance they carry

Questions to ask before booking

Landlords, agents and facilities managers

We also work for facilities teams across offices, schools and healthcare across Oxfordshire. Work can be phased by floor, building or site to keep disruption down.

Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we will send a fixed quote.

What affects the quote in Clifton

There’s no set price list, because no two systems are the same. The quote depends on:

  • Working hours and out-of-hours timing
  • Travel, parking and unloading
  • Site requirements such as sign-in and permits
  • How easy every part is to reach

Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all play a part.

What to send for a quote

To speed up the quote, send us:

  • Any access panels or hatches you can see
  • Photos showing the whole system and its surroundings
  • When the site is open and when it’s quiet
  • How we’d reach plant on a roof or in a plant room

To help us quote: the address, the type of site and when it’s open, a few photos and the last certificate or report, if there is one. Once you have those, call us on 0345 646 2711 or send us an email.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London