Hampshire · Fire damper testing
Fire Damper Testing in Clanville
We cover Clanville for fire damper drop testing and smoke damper testing, with a record for each damper. Fixed quotes, work around your opening hours and photo reports on every job.
- Fire dampers that haven’t been tested for over a year
- Fire dampers that fail to drop shut
- Buildings with no damper register
About our fire damper testing in Clanville
BESA guidance is that fire dampers should be tested by a competent person when they’re installed and at least annually after that. For spring-operated types, annual testing is the minimum. Our job is to do the testing and hand you the paperwork that shows it. Typical jobs include corroded dampers in damp risers and plant rooms and dampers hidden with no access panel or hatch, across riser dampers, fusible link fire dampers and hospitals and care homes.
In a village or hamlet like Clanville, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
The sign-off is always in writing: a dated report with pictures of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Place
- Clanville (SP11)
- Region
- Hampshire
- Paperwork
- Written report with pictures
- Price
- A fixed price before any work starts
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Your questions about fire damper testing in Clanville
Can the work in Clanville be done at night or at weekends?
Yes, we can come after you close and finish before you open. The site is handed back ready to open. When you phone us on 0345 646 2711 or email us, mention when the site is quiet.
Is Clanville within the area you cover?
Yes. Villages and rural sites across the South East are part of our work, Clanville included. Photos of the system and directions to the site help us plan the visit.
Do we lose a day’s trading?
Not normally. We work when the area is out of use, such as evenings, overnight, early mornings or weekends, so you keep your normal hours.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’ve been trading since 2009 and we are fully insured.
Who has the duty to keep fire dampers working?
Under the Fire Safety Order 2005, it’s the responsible person, such as the employer, owner, landlord or managing agent. They must keep fire safety measures, including dampers, in working order.
What if parts of the system can’t be reached?
The report shows them clearly. Often the fix is extra access, such as new panels in ductwork, which we can install.
Where does the waste go?
We take it away when we go. While we work, it’s kept contained to keep the area clean.
How far ahead should we book?
Earlier is better, especially for out-of-hours work. We typically quote within one working day, and emergencies are covered by our 24/7 line.
What staff can safely do
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
For landlords and multi-site operators
Multi-site operators often want one contractor and one number. We work across London and the South East, so visits at different addresses can be planned together and kept on a regular cycle.
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we will send a fixed quote.
Aftercare tips
After the visit, a few habits help the work last:
- Keep to at least yearly testing
- Don’t let hatches get painted shut or boarded over
- Get remedials done soon after a failed test
- Store test records alongside the fire risk assessment
Share the results with your fire risk assessor, so the assessment reflects where the dampers stand. Faults on the report are worth closing off quickly.
A simple register of every damper helps a great deal: location, type, last test date and result. It stops dampers getting lost as the building changes.
What affects the cost of fire damper testing
The diagnosis comes before the price. We look at:
- How big the system is
- One-off work versus a regular cycle
- Travel, parking and unloading
- Working hours and out-of-hours timing
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we will go through it with you.
What to send for a quote
A few details help us quote accurately. When you get in touch, it helps to send:
- The roof, plant room or outside wall the system runs to
- Detail shots of panels, filters and grilles
- Where the site is and what kind of site it is
- A few general shots of the system
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. Then we send a fixed price so you know the cost before work begins.
Part by part
Smoke dampers
A smoke damper that doesn’t respond to its controls is recorded as a fault, with a note of what we found.
Ceiling voids and risers
Where ductwork runs up through a building, there are often dampers at every floor. We work through them floor by floor so nothing is missed.
What we do, step by step
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. On site, the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. A quick note on how to find the site and where to park makes a visit to Clanville run smoothly.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
How to prepare
- Let us know how we reach the system, including roofs, risers and plant rooms
- Agree a time when the area can be out of use
- Mention any sign-in, permit or induction we need
Getting a quote
To get a fixed quote, call 0345 646 2711 or email us and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. You’ll normally have a quote within one working day.
Read more
Also near Clanville
More services for Clanville
When it’s something else
In fairness, some problems need a different fix:
- Gaps in the wall or floor around the damper
- Ductwork crossing a fire wall with no damper fitted
- Fire risk assessments, which need a fire risk assessor
If you are not sure, just ring 0345 646 2711 or email us and we will give you a straight answer before you book.
Parts of the system we cover
- Wall and floor dampers
- Offices and schools
- Hospitals and care homes
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers
Fire damper testing in Clanville: local notes
Andover War Memorial Hospital is the nearest hospital, about 2.9 miles south-east of Clanville. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed. Hampshire and Isle of Wight Fire and Rescue Service covers Clanville. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
Site managers at schools such as Appleshaw St Peter's CofE Primary School usually find the summer break the easiest time for ceiling work like damper testing. The nearest hospital, Andover War Memorial Hospital, is about 2.9 miles south-east; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly.
Clanville is about 4 miles north-west of Andover, in Hampshire. For fire damper testing in and around Clanville, it’s easy to get a fixed quote: please phone us on 0345 646 2711 or drop us a line. Our area covers London and the South East, Clanville included. Clanville is one of 683 towns, villages and districts in Hampshire we cover for fire damper testing. Our Southampton page covers sites nearby, about 23 miles away.
Here we cover the SP11 postcode area for fire damper testing. We also cover the places around Clanville: Appleshaw (1 mile south-west), Redenham (1 mile west), Penton Mewsey (1 mile south-east), Chute Forest (1 mile north-west) and Penton Grafton (1 mile south). Larger places within reach include Andover (4 miles south-east), Tidworth (5 miles west), Weeke (15 miles south-east), Ludgershall (4 miles west), Whitchurch (9 miles east) and East Anton (4 miles east).
Near you in Clanville
Typical jobs here are in premises near The Lion pub, among other places. For rail, the closest station is Andover station, roughly 3.2 miles south-east. Other landmarks nearby include Andover Museum (3.7 miles south-east) and Andover War Memorial Hospital (2.9 miles south-east). Open spaces near Clanville include Anton Lakes and Mill Lake.