Hertfordshire · Extract fan repair and replacement
Extract Fan Repair in Standon
Extract fan repair for Standon, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- A humming noise from the fan motor
- A fan rattling in its housing
- A fan worn beyond sensible repair
About our extract fan repair in Standon
Think of it as a check-up for the fan: listen to it, diagnose the fault, then treat it. What you want back is a fan that runs smoothly and a plain account of what we found. We are often asked to deal with an extract fan that rattles or knocks and a whining or grinding extract motor, on fan motors, fan housings and roof and wall fans.
For a fan repair in or near Standon, the more you tell us about the fan, the better the first visit: a photo of the fan, the details on its label and the access arrangements help us plan.
Insurers, fire officers and environmental health officers all look at records. That’s why every job is written up in a report with photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Standon (SG11)
- Wider area
- Hertfordshire
- Reporting
- Photo report after every visit
- Quote
- A fixed quote up front
- Hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Why it’s worth doing now in Standon
It can be tempting to turn the fan down to quieten it. That reduces extraction without fixing anything while the underlying wear continues. Diagnosing the fault properly is the lasting answer. With notice, the visit to Standon can be fitted around your bookings and events.
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before we start.
What you get with us
- CHAS and SafeContractor accredited, with ISO 9001
- Fully insured
- Fixed quotes from a survey or pictures
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
Read what affects the cost and our accreditations and certificates.
What happens on the day
The first job on site is protection: sheeting goes over floors and surfaces close to the work. Then we make the system safe and start. The work on site takes anything from an hour or two to a full visit, depending on the fault, and the area is cleaned down before we leave. A few photos of the system help us make the most of a visit to a place like Standon.
- We agree a time to attend, out of hours if needed.
- The extract is switched off and the fan opened up.
- Bearings, drive, impeller, motor and mounts are inspected.
- You hear whether repair or replacement makes sense, with a fixed quote.
- The fan is repaired or replaced, then checked running.
Getting ready for the visit
- Make sure someone can let us in and lock up afterwards
- Tell us the best time to work, such as after service or at a weekend
- Mention any parking or loading restrictions
How to get a quote
For extract fan repair in Standon, ring 0345 646 2711 or use the quote form. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. A fixed quote normally follows within one working day.
Related advice
What the work involves, part by part
Motors and bearings
The motor and its bearings work hardest. Hot, greasy air and long days wear them down.
Belt-driven fans
A squeal when the fan starts is a classic belt symptom. We check the belt condition, tension and alignment and replaced if they’re worn.
What a clean won’t put right
An honest diagnosis matters more to us than a booking, so here’s what extract fan repair will not do:
- Problems with the gas supply or its interlock valve
- Grease throughout the ductwork, which needs a full TR19 clean
- Problems with the electrical supply to the fan (an electrician’s job)
If in doubt, call us on 0345 646 2711 or use the quote form and we will say what we think.
What we work on in Standon
- Fan housings
- Belts and pulleys
- Bearings
- Roof and wall fans
- Fan motors
- Kitchen extract fans
How we price extract fan repair
Sites vary more than people expect. What affects the quote:
- The number of sites or systems
- Whether it’s a one-off visit or part of a schedule
- The condition of the system
- The size of the system
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. You will have a fixed price before any work starts.
What to send for a quote
There’s no need for technical detail. It helps if you can send:
- Wide pictures of the system and the area around it
- Detail shots of panels, filters and grilles
- Any previous report or certificate
- Any symptoms, from odd noises to smells or leaks
Every quote begins with a look at the system, from your pictures and details or, where that isn’t enough, a survey on site. Then we send a fixed price so you know the cost before work begins.
What extract fan repair looks like in Standon
Standon is about 27 miles from central London, well within the area we cover across London and the South East. Visits are booked around your hours, evenings and weekends included. Food hygiene inspections in Standon are the job of East Hertfordshire council’s environmental health team. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. Getting the fan running again is the priority.
If you run a school kitchen, at a school such as Roger De Clare First CofE School or nearby, a fan that’s getting noisy is best repaired in the holidays before it fails in term.
Standon is about 5 miles north-east of Ware, in Hertfordshire. Sites in Standon get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. Standon is one of 381 places in Hertfordshire where we work for commercial clients. We also work in Chelmsford, about 22 miles from Standon.
Extract fan repair in SG11 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on High Street, Stortford Road and Town Farm Crescent or a nearby road, our technicians can take on the work. Neighbouring places we cover for extract fan repair include Puckeridge (1 mile north-west), Bromley (1 mile south-east), Colliers End (2 miles south-west), Barwick (2 miles south-west) and Hadham Ford (2 miles east). Further out, we also cover Stevenage (9 miles west), Bishop's Stortford (6 miles east), Welwyn Garden City (11 miles south-west), Hitchin (14 miles west), Hoddesdon (9 miles south) and Cheshunt (12 miles south).
Local landmarks in Standon
Locally, jobs take us to businesses close to Ralph Sadleir Middle School and The Bell Public House and the streets around them. Nearby you will also find Moated mound (3.5 miles east).
Nearby places to Standon
What else we do in Standon
Common questions in Standon
Do you cover smaller places like Standon?
Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.
Do you work overnight in Standon?
Yes, evening, overnight and weekend work is normal for us. That way a site in Standon does not have to lose a day’s trading. Let us know the hours you’re closed and we will book within them.
Can one contract cover all our sites?
Yes. Send the list of sites and the work at each and you will get one fixed quote.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It is not law, but it’s the benchmark.
Who is the responsible person?
The law calls them the responsible person. That is generally the employer or the person in control of the premises, and where several people have control, each can have duties. If you are not sure, check your lease and fire risk assessment.
Can you tell me the price of a fan repair?
Every fan job is priced once we know the fault. Repair, parts or a full replacement all cost differently so the first step is a diagnosis.
Will we have to shut during the visit?
Not usually. We need the work area to ourselves while we’re on site, so the visit goes in a quiet slot.
Can you set up regular visits?
Yes, of course. Send details of the systems and how they’re used, and we will suggest a schedule and quote for it.
When to call us in Standon
Over the years, mountings loosen and rubber mounts break down. Then every vibration is passed into the duct and the building, which is where knocking and rattling often come from.
Any of these means the system needs a check-up:
- An extract that vibrates through the ductwork
- A failed fan that needs a replacement
- A dead fan motor
- A squealing belt on start-up
A fan that rarely runs, like one in a hall kitchen near Church of St Mary or elsewhere in Standon, can seize between uses.
Comparing quotes
- Whether the quote shows VAT
- What happens if part of the system cannot be accessed
- What hours they’ll be on site
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
Multi-site and managed buildings
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
Multi-site operators often want one contractor and one number. We cover South East England and London, so visits at different addresses can be planned together and kept on a regular cycle.