Greater London · Extract fan repair and replacement
Limmo Peninsula extract fan repair
Repair and replacement of kitchen extract fans, fan motors and worn fan parts for commercial sites in Limmo Peninsula and across Greater London. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- A fan shaking on its mountings
- A worn or slipping fan belt
- A motor that trips out or overheats
Extract fan repair in Limmo Peninsula
A faulty fan doesn’t always mean a new one. Often a clean, a new belt or new bearings brings it back, and that is what we will recommend. Where the motor has burnt out or the unit is past saving, a replacement suited to the system goes in. If you have a knocking noise from the extract fan and a fan running too slowly to clear the kitchen, we can help.
London extract fans often sit on rooftops, exposed to the weather as well as the grease, and bearings, belts and motors wear out in the end. Noise and vibration are worth reporting before the fan stops.
For insurers and inspectors, the record counts. That is why every job is written up in a report with photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Limmo Peninsula (E16, E14, SE10)
- Region
- Greater London
- Paperwork
- Written report with photos
- Price
- A fixed quote up front
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
What affects the quote in Limmo Peninsula
We do not publish a price list, because sites vary so much. What we look at:
- Where the site is and how we reach it
- The condition we find in the survey
- The times the site is available
- Site requirements such as sign-in and permits
One small site or a whole estate, we price it on the same basis: what needs doing, how we get to it and when. The price is fixed before any work starts.
What we need to know
When you contact us, these details help:
- Problems your staff have spotted
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
- Detail shots of panels, filters and grilles
We don’t publish a price list, because every site is different. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To start, give us a ring on 0345 646 2711 or send us an email.
Different parts, different methods
Motors and bearings
A grinding or rumbling noise often means worn bearings. We find out whether the bearings or the motor is at fault before recommending a fix.
Impellers and housings
Grease settles inside the fan housing as well as on the blades. Both are inspected, and cleaning can form part of the repair.
How it works
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. All told, the work takes part of a day for most faults, with a return visit if parts have to be ordered. Loading bays, visitor permits and roof access are the first things we ask about for a site in Limmo Peninsula.
- A visit is booked, in the evening or overnight if that suits.
- The extract is switched off and the fan opened up.
- Bearings, drive, impeller, motor and mounts are inspected.
- We explain the options and quote a fixed price.
- We complete the work and check the fan runs smoothly.
How to prepare
- Mention any sign-in, permit or induction we need
- Agree a time when the area can be out of use
- Move anything stored near the system
Ask for a quote
For a fixed quote, phone us on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. You’ll typically have a quote within one working day.
Read more
Aftercare tips
Simple habits between visits make a real difference. We recommend:
- Keep the area around the fan controls clear
- Make sure the fan is cleaned with the rest of the system
- Report new noises from the fan early
- Don’t turn the fan down to hide a noise
Clean filters help a repaired fan stay that way. Less grease on the impeller means less wear and fewer faults.
The fan is part of every full TR19 clean. A clean impeller stays in balance and that means less wear.
Why act early in Limmo Peninsula
Wherever the kitchen is, Limmo Peninsula included, the fan often sits on an outside wall or roof, so its noise does not stay in the kitchen. Dealing with the fault brings the noise back down before it becomes a nuisance. Planning ahead in Limmo Peninsula lets you pick a quiet night rather than lose a busy one.
The cost depends on the size of the system, what state it’s in and how easy it is to reach. We give you a fixed price before work begins, so you know where you stand.
What you get with us
- A single point of contact for sites across the South East and London
- Out-of-hours work and a 24/7 emergency line
- Survey first, then a fixed quote
- Photo reports with every job
See how cleaning jobs are priced and our accreditations and certificates.
Also near Limmo Peninsula
Also in Limmo Peninsula
Extract fan repair around Limmo Peninsula
Food Standards Agency data counts about 465 cafés, restaurants and staff canteens and about 172 takeaways and sandwich shops within roughly a mile and a half of the centre of Limmo Peninsula. For any of them with a canopy, the extract fan is what keeps the kitchen usable. London extract fans are often at the end of long duct runs, on roofs or in basements. Environmental health officers from Newham council inspect food businesses in Limmo Peninsula. Food hygiene rules expect food premises to have suitable and sufficient ventilation. That makes a fan repair urgent rather than something to put off.
If you run a school kitchen, at a school such as St Luke's Primary School or nearby, a fan that’s getting noisy is best repaired in the holidays before it fails in term. A fan that rarely runs, like one in a hall kitchen near Church of St Luke or elsewhere in Limmo Peninsula, can seize between uses. For kitchens close to Custom House station, a fan that stops mid-service needs fixing fast, and our emergency line runs 24/7.
Limmo Peninsula is about 1 mile west of Canning Town, in Greater London. Whatever kind of site you run in Limmo Peninsula, extract fan repair is something we can help with. We can work out of hours so the site keeps running. Our Greater London coverage runs to 764 places, and Limmo Peninsula is one of them.
We cover every part of E16, E14 and SE10 for extract fan repair and the streets around it. You will find streets such as Tant Avenue, Rogers Road and Lanrick Road, and we cover them all for extract fan repair. Main roads around Limmo Peninsula include the A1262 and A1263, so getting to you is simple for extract fan repair. We also cover the places around Limmo Peninsula: Leamouth (1 mile west), Blackwall (1 mile south-west), Canning Town (1 mile east), Coldharbour (1 mile south-west) and West Silvertown (1 mile south-east). Larger places within reach include London (5 miles west), City of Westminster (7 miles west), Marylebone (7 miles west), Kensington (9 miles west), St Pancras (6 miles west) and Shoreditch (4 miles west).
Local landmarks in Limmo Peninsula
Around Limmo Peninsula, our work takes us to kitchens and buildings near Tower Hamlets College, Rokeby School and Bridge House. Limmo Peninsula’s nearest station is Custom House station, roughly 0.8 miles east of the centre. A little further out are Stratford Centre (2.2 miles north) and Greenwich Castle (2.3 miles south). Open spaces near Limmo Peninsula include Hollow Pond and Lavender Pond.
Common questions in Limmo Peninsula
Which council inspects kitchens in Limmo Peninsula?
In Limmo Peninsula, it’s Newham council that carries out food hygiene inspections. An officer may ask how the kitchen is ventilated, so keep repair records with your maintenance file.
Do you work at weekends in Limmo Peninsula?
Yes, nights and weekends are routine for us. The work in Limmo Peninsula can fit around your hours. Tell us your opening hours when you ask for a quote.
What causes a noisy extract fan?
It can be one of a few things, including bearings, belts, grease and mounts. It’s worth having it diagnosed before it leads to a breakdown.
Do you have insurance?
Yes, we are fully insured. We also hold CHAS and SafeContractor for clients who vet their contractors.
What should go in our maintenance log?
The reports and certificates from each visit, plus your own logs. Insurers, fire officers and EHOs may all ask to see them, so keep them together and easy to find.
Do you provide a certificate or report?
Yes, on every job. The report is dated and includes photos, and TR19® Grease cleans come with a certificate through the BESCA VHE portal. File it with your fire safety records.
What do you do with what you remove?
Anything we remove is contained as we work and taken away with us, from grease and debris to used cleaning water. None of it is left on site.
What’s TR19?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked, and it takes a risk-based approach.
For landlords and multi-site operators
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.
What your team can do, and what needs us
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and give you a fixed quote.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.