Kent · Extract fan repair and replacement
Extract fan repair and replacement in Chilton, Kent
Specialist extract fan repair for Chilton: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- A failed fan that needs a replacement
- A knocking noise from the extract fan
- An overheating extract motor
Extract fan repair for kitchens and businesses in Chilton
Extract fan repair starts with a diagnosis. A noisy fan might need cleaning, new bearings or a new belt, while a fan that won’t start may have a motor or control fault. We explain the problem, and what it will take, before we start. We’re often asked to deal with an old fan that needs replacing and a fan that keeps cutting out, on fan housings, kitchen extract fans and belts and pulleys.
Kitchens around a smaller place like Chilton often have fans fitted to a wall or roof years ago. An older fan that fails may be better replaced than repaired.
Think of the report as the system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Location
- Chilton (CT11, CT12)
- Region
- Kent
- Paperwork
- Photo report after every visit
- Quote
- Fixed quote, usually within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
The process
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes part of a day for most faults, with a return visit if parts have to be ordered. We plan the journey to Chilton and bring what the job is likely to need.
- We agree a time to attend, out of hours if needed.
- We isolate the extract and open the fan housing.
- Bearings, drive, impeller, motor and mounts are inspected.
- We explain the options and quote a fixed price.
- We complete the work and check the fan runs smoothly.
Getting ready for the visit
- Allow time for equipment near the work to be turned off and cool down
- Arrange a key holder or contact on site
- Agree a time when the area can be out of use
Get a fixed quote
Want a quote for extract fan repair? Please ring 0345 646 2711 or email us with a few details about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Related advice
Also near Chilton
What else we do in Chilton
What extract fan repair looks like in Chilton
The coast is only about 1 mile from Chilton. Motor mounts, bolts and housings on outdoor fans corrode faster close to the coast. Food Standards Agency records list about 88 restaurants, cafés and canteens and about 44 takeaways and sandwich shops in and around Chilton, up to about a mile and a half out. Those that cook under a canopy rely on a fan that runs every hour they’re open. Kitchens in Chilton get their food hygiene inspections from Thanet council. Food hygiene rules expect food premises to have suitable and sufficient ventilation. That is one more reason not to keep cooking with a broken fan.
If you cook near Ramsgate station, long trading hours wear fan belts and bearings, so noise and vibration are worth reporting early. For school kitchens, at schools like Chilton Primary School for example, a planned fan repair in the holidays avoids losing lunches in term time.
Chilton is about 1 mile south-west of Ramsgate, in Kent. Whatever kind of site you run in Chilton, extract fan repair is something we can help with. We can work out of hours so the site keeps running. Chilton is one of 922 places in Kent where we work for extract fan repair. We also work in Maidstone, about 38 miles from Chilton.
Every address in CT11 and CT12 is covered for extract fan repair, from the main roads to the quietest streets. Whether your site is on Saxon Road, Downs Road and Edith Road or anywhere close by, our technicians can take on the work. Main roads around Chilton include the A299, so getting to you is simple for evening and night visits. Close by, we work in Pegwell (1 mile south), Cliffs End (1 mile west), Newington (1 mile north), Manston (1 mile north-west) and Haine (2 miles north). Within a short drive, we also cover Canterbury (14 miles west), Margate (3 miles north), Dover (14 miles south), Broadstairs (3 miles north-east), Deal (8 miles south) and Herne Bay (11 miles west).
Local landmarks in Chilton
Typical jobs here are in premises near Chatham House Grammar School, The Belle Vue pub and Churchill House School With Railed Area. Chilton’s nearest station is Ramsgate station, roughly 0.9 miles north-east of the centre. Nearby you’ll also find Westwood Cross (1.9 miles north) and Ramsgate Tunnels (0.9 miles east). For a walk, there’s Sandwich and Pegwell Bay.
What staff can safely do
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
How the job changes from site to site
Motors and bearings
An overheating motor is a warning sign. It may be straining against blocked filters or ducts or the motor may be near the end of its life.
Impellers and housings
A damaged or corroded impeller can’t simply be cleaned. It may be replaced on its own, or with the whole fan.
When to call us in Chilton
Some grease always slips past the filters and reaches the fan. It builds up on the impeller blades unevenly, so the fan runs out of balance and the noise follows.
It’s time to book a visit if you see:
- A belt-driven fan that squeals
- A dead fan motor
- Weak extraction and a smoky kitchen
- A fan rattling in its housing
If you look after a church or hall kitchen near Church of St Laurence, or anywhere in Chilton, test the extract fan before a big event rather than on the day.
What your quote should include
- Exactly which parts of the system are covered
- Whether the quote is based on a survey or photos
- Whether they recommend a next date
- What happens if part of the system cannot be accessed
What affects the quote in Chilton
We do not publish a price list, because no two systems are the same. The quote depends on:
- Access, including roofs, risers and ceiling voids
- One-off work versus a regular cycle
- Travel, parking and unloading
- How big the system is
Combining work into one visit or one programme often makes better use of the time. Tell us about everything you’d like looked at, and you will get one fixed quote.
Helping us quote
There’s no need for technical detail. Just send:
- Photos showing the whole system and its surroundings
- The times we could work without disrupting the site
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. Then we send a fixed price, before any work starts.
Questions from Chilton
Do you work overnight in Chilton?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Chilton needn’t be disturbed. Just call 0345 646 2711 or send us an email with your opening times and we’ll plan around them.
Can you get to a site in Chilton?
Yes, Chilton is part of our area, however small the site. A survey first, from pictures or a visit, means we arrive with the right kit.
Where does the waste go?
Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. We do not leave it behind.
Is TR19 a legal requirement?
No. TR19® is BESA’s specification, not legislation. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How much notice should we give?
That depends on the slot you want and the size of the job. Mention your preferred dates with your enquiry, and for anything urgent, ring our 24/7 emergency line.
Is there a survey before the work?
Yes, every time. Diagnosis comes before treatment: the survey shows what needs doing and what access we need, and the quote is based on that.
What is TR19?
BESA’s ventilation hygiene specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It is not law, but it’s the benchmark.
Can you supply and fit a replacement fan?
Yes. We fit replacement fans as well as repairing old ones and we will talk you through what’s involved.
Why deal with it now?
Vibration does damage beyond the fan. It loosens fixings, strains duct connections and wears the housing, so a small repair can grow into a bigger one. A planned visit to Chilton fits your hours; an emergency doesn’t.
We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we’ll talk you through it.
What you get with us
- Full insurance on every job
- Accredited under CHAS and SafeContractor, with ISO 9001
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fixed quotes, usually within one working day
Take a look at what affects the cost and our accreditations.
When it’s something else
It’s worth knowing the limits before booking:
- An extract system that was undersized from the start
- A greasy canopy and duct that a fan repair won’t touch
- Gas interlock faults that a Gas Safe registered engineer must deal with
Not sure which it is? You can call 0345 646 2711 or email us and we will tell you honestly before booking.
Parts of the system we cover
- Fan housings
- Kitchen extract fans
- Bearings
- Fan motors
- Roof and wall fans
- Belts and pulleys