Isle of Wight · Extract fan repair and replacement
Extract Fan Repair in Brading
Specialist extract fan repair for Brading: diagnosis first, then a fixed quote, the work and a report with photos. Ask us for a fixed quote.
- A fan shaking on its mountings
- A failed fan that needs a replacement
- A fan rattling in its housing
Between visits
No system stays clean for ever, but care slows the build-up. A few tips:
- Make sure every filter is in place and clean
- Save our number for the 24/7 emergency line
- Don’t turn the fan down to hide a noise
- Keep access to the fan controls unobstructed
Your kitchen can get back to normal as soon as the fan is running. We leave the area tidy and explain anything you need to know.
The fan is part of every full TR19 clean. Keeping grease off the impeller is one of the simplest ways to protect it, so planned cleaning helps the fan last.
About our extract fan repair in Brading
Think of it as a check-up for the fan: listen to it, diagnose the fault, then treat it. The aim is steady, quiet extraction and a clear explanation of what was done. The work covers fan motors, kitchen extract fans and bearings, and common reasons people get in touch are a belt-driven fan that squeals and a fan rattling in its housing.
Rural kitchens often have fans mounted on outside walls or roofs, exposed to the weather. Weather and grease together wear out motors and bearings.
The sign-off is always in writing: a dated report with photos of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.
- Where
- Brading (PO36)
- Region
- Isle of Wight
- Reporting
- Written report with pictures
- Quote
- A fixed price before work begins
- Hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
What we’re called out for in Brading
Not every problem is mechanical. Speed controllers, isolators and wiring can all fail, and a fan that won’t start is not always a dead motor.
If you notice any of these, it’s worth a diagnosis:
- A failed fan that needs a replacement
- An extract fan that rattles or knocks
- A fan that won’t start at all
- An overheating extract motor
A fan that rarely runs, like one in a hall kitchen near St. Mary's Church or elsewhere in Brading, can seize between uses.
Questions to ask before you book
- Whether the quote shows VAT
- What insurance they carry
- Whether the price is fixed
- Proof of accreditation you can verify
How it works
The first job on site is protection: sheeting goes over floors and surfaces close to the work. Then we make the system safe and start. The work on site takes a few hours for most repairs, longer for a full fan replacement, and the area is cleaned down before we leave. In a small place like Brading, the journey is planned ahead and the visit arranged around the site’s hours.
- First, you tell us the symptoms: noise, shaking, weak extraction or no power.
- The fan is isolated and opened up so we can see inside.
- We check the motor, bearings, drive, impeller and mountings.
- We explain the fault and give you a fixed price for the fix.
- We fix or replace the fan, then test it running before we leave.
How to prepare
- Clear loose items from the work area
- Agree a time when the area can be out of use
- Plan for cooking equipment or plant to be off before we arrive
Get a fixed quote
Quoting starts with a diagnosis, from your photos and details or, where that is not enough, a survey on site. Then we send a fixed price, before we start.
Read more
What else we do in Brading
Fixed quotes for extract fan repair in Brading
The survey tells us what the work involves. The main factors are:
- Whether it’s a one-off visit or part of a schedule
- Whether we need access equipment or extra panels
- The condition we find in the survey
- Parking and loading at the site
The cost depends on the size of the system, what state it’s in and how easy it is to reach. We give you a fixed price before any work starts, so you know where you stand.
What to send for a quote
To help us quote quickly, please include:
- Your opening hours and when the area is out of use
- Photos showing the whole system and its surroundings
- The paperwork from the last visit, if you have it
- Problems your staff have spotted
To get a fixed quote, call 0345 646 2711 or drop us a line with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We usually come back within one working day.
Extract fans in Brading
At about 2 miles from the coast, Brading is close enough for sea air to matter. Rust and grease together wear a fan out sooner, and coastal air speeds up the rust. Look up Brading on the FSA’s food hygiene register and you will find about 19 restaurants, cafés and works canteens and about 4 takeaways in and around Brading, up to about a mile and a half out. Every one of them that cooks under a canopy depends on its extract fan to keep cooking. It’s Isle of Wight council that sends environmental health officers to food businesses in Brading. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. A kitchen without a working fan has a problem to fix quickly.
School kitchens cannot easily serve lunch without extraction, so if you look after one at a school like Brading Church of England Controlled Primary School, fix a failing fan before term starts. If you run a kitchen close to Brading station and the extract fan is getting noisy, a planned repair after closing beats a breakdown at the rush.
Brading is about 3 miles south of Ryde, in the Isle of Wight. Sites in Brading get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. Across the Isle of Wight, we cover 125 places, and Brading is one of them. For sites nearby, see our Portsmouth page, about 9 miles away.
Extract fan repair in PO36 follows the same survey, fixed quote and written report as everywhere else we cover. If you need extract fan repair at premises on Station Road, High Street and Wrax Road or anywhere close by, we can help. Main roads around Brading include the A3055, which makes travel easy for extract fan repair. We also cover Yarbridge (1 mile south), Morton (1 mile south-west), Adgestone (1 mile south-west), Yaverland (1 mile south) and Gaskins (1 mile north-east). Within a short drive, we also cover Newport (7 miles west), Ryde (3 miles north), Cowes (9 miles north-west), Shanklin (4 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). For island and remote sites, the visit takes a little more planning, so mention it when you ask for a quote.
Around Brading
Around Brading, our work takes us to kitchens and buildings near The Bugle Inn and Sandown Bay Academy and the streets around them. Brading has its own railway station: Brading station. Well-known places in the area include Sandown Castle (1.5 miles south) and Brading Waxworks (within half a mile north). Green spaces nearby include Brading Marshes RSPB reserve and Brading Down.
For landlords and multi-site operators
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Common questions in Brading
Can sea air affect extract fan repair in Brading?
Yes, to a degree: at about 2 miles from the coast, Brading gets salt-laden air that corrodes metal faster. Rooftop fans, discharge cowls and fixings are checked for corrosion as well as grease.
Who inspects food businesses in Brading?
That is Isle of Wight council, whose environmental health officers carry out food hygiene inspections in Brading. An officer may ask how the kitchen is ventilated, so keep repair records with your maintenance file.
What if our extract fan fails during service?
We run a 24/7 emergency callout for exactly this. We will take the details and get an engineer to you as soon as we can.
Do you work with multi-site operators?
Yes. We work across South East England and London, so sites at different addresses can be planned together on one programme. Each site gets its own report and pictures.
How much notice should we give?
It depends on the time you need and how big the job is. Mention your preferred dates with your enquiry, and for anything urgent, ring our 24/7 emergency line.
Which records should we keep?
Anything that proves the system is maintained: our reports and pictures, any certificates and your in-house logs. A single log for each site works best.
How long will the fan be out of action?
That depends on what’s wrong, but most jobs take an hour or two to diagnose, then longer if parts or a new fan are needed. You’ll know more once we have found the fault.
Does the extract need to be off for a fan repair?
While we are working on the fan, the extract is isolated. We can come when the kitchen is closed so you don’t lose trade.
How the job changes from site to site
Fan controls
Controls are checked as well as the fan itself since the motor isn’t always to blame.
Motors and bearings
Motors and bearings take the most strain in a kitchen extract fan. Heat, grease and long running hours all wear them.
Staff cleaning versus specialist work
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.