Isle of Wight · Kitchen extract cleaning
Brading kitchen extract cleaning
Looking for kitchen extract cleaning in Brading? We survey first, give you a fixed quote and work around your opening hours, then sign off with a report and pictures.
- Grease dripping from the canopy or filters
- A system with no record of a TR19 clean
- Cleaning needed before an insurance renewal or survey
Part by part
Extract fan and discharge
The fan pulls the air through the whole system, and grease that gets past everything else ends up on its blades. We isolate it, open it up and degrease it.
Canopy and plenum
The canopy catches the vapour, and the plenum behind the filters is where it first condenses. Both are scraped and degreased inside and out, including the filter housing.
TR19 kitchen extract cleaning in Brading
Many insurers ask for proof that the extract has been cleaned to TR19, and some may refuse or reduce a claim when it’s missing. For a kitchen in Brading, our certificate and photo report give you that record for the maintenance log. If you are dealing with missing paperwork after a change of operator and an overdue clean flagged by an EHO or fire officer, we can help, from plenums and filters, vertical risers and canopies and hoods onwards. Extraction cleaning, hood cleaning and TR19 duct cleaning all end up in the same place: a clean that goes past the canopy into the duct and fan, backed by a certificate.
The fire risk in a kitchen extract sits in the parts nobody sees: the plenum, the duct and the fan, which is why a TR19® clean in Brading goes well beyond the canopy.
Work in a small place like Brading starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Accreditations are easy to claim and worth checking. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Brading (PO36)
- Wider area
- Isle of Wight
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed price before we start
- Working hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
What happens if it’s left?
Grease that’s left only gets thicker. BESA guidance says the mean should not go above 200 microns between cleans, and 500 microns or more at any point needs immediate spot cleaning. Heavy build-up takes longer to remove than regular cleans. It’s simpler to plan the work at Brading now than to arrange it in a hurry later.
Combining work into one visit or one programme can make for a more efficient booking. Mention every system or site you need covered, and you’ll get one fixed quote.
Why us?
- Out-of-hours work and a 24/7 emergency line
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Survey first, then a fixed quote
- Accredited under CHAS and SafeContractor, with ISO 9001
Between visits
Once we have finished, these simple steps help:
- Refit filters properly after cleaning
- Clean grease off the canopy surfaces regularly
- Clean the grease filters regularly between TR19 cleans
- Keep the cleaning records where you can find them
The certificate records when the clean was done, where and by whom. Keep it in the maintenance log with your fire risk assessment so it’s ready when anyone asks to see it.
Stick to the cleaning interval on the certificate. BESA guidance links the minimum interval to daily cooking hours, so a change in hours may mean a change in interval, and grease readings will show it.
Multi-site and managed buildings
If you look after several sites, we can schedule visits across all of them on one quote. Each site gets its own report and pictures, so records stay tidy.
Facilities teams in offices, schools and healthcare sites book us too across the Isle of Wight. Work can be phased by floor, building or site to keep disruption down.
Other services in Brading
Questions from Brading
Do you work overnight in Brading?
Yes, nights and weekends are routine for us. That way a site in Brading does not have to lose a day’s trading. Let us know the hours you are closed and we’ll book within them.
Do you work in villages like Brading?
Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.
Is a quote from photos possible?
Often, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
What do I get after the clean?
Every clean comes with a TR19 certificate and a photo report. Keep them in the maintenance log with the fire risk assessment, ready for your insurer or an inspection.
How long will the clean take?
A small kitchen with a short duct can be done in a few hours, but large systems may be spread over more than one visit. Your quote says how long to expect.
How much does kitchen extract cleaning cost?
We don’t publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before work begins.
Can we book visits on a schedule?
Yes. Send details of the systems and how they’re used and we’ll propose a schedule with a fixed quote.
Is TR19 a legal requirement?
TR19® itself isn’t law. Under the Fire Safety Order 2005, the responsible person must assess and reduce fire risk, and cleaning to TR19 is the recognised way to show you’ve dealt with extract grease.
What kitchen extract cleaning can’t fix
Kitchen extract cleaning can’t fix everything, and we’d rather say so up front. It will not put right:
- Fat blocking the kitchen drains
- An undersized canopy or fan
- A fan motor that has burnt out
If in doubt, ring 0345 646 2711 or drop us a line and we will say what we think.
Parts of the system we cover
- Canopies and hoods
- Vertical risers
- Horizontal duct runs
- Discharge points
- Plenums and filters
- Extract fans
Grease, kitchens and Brading
The coast is only about 2 miles from Brading. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. The FSA’s food hygiene register shows about 19 restaurants, cafés and canteens and about 4 takeaways and sandwich shops within roughly a mile and a half of the centre of Brading. Any of them cooking under a canopy is sending grease into its ductwork every service. In Brading, food businesses are inspected by environmental health officers from Isle of Wight council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Before-and-after photos from each clean are a simple way to show the extract is in hand.
For kitchens close to Brading station, where the day often starts early and ends late, the extract can be cleaned overnight. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Arthur Webster Memorial Hospital for Children is the nearest hospital to Brading, about 3.4 miles south-west. Volunteers running a hall kitchen near St. Mary's Church, or anywhere in Brading, may not know when the extract was last cleaned, and a grease test settles it.
Brading is about 3 miles south of Ryde, in the Isle of Wight. We carry out kitchen extract cleaning for commercial premises of every kind in Brading and the rest of the Isle of Wight. We cover 125 places across the Isle of Wight, from busy centres to quieter spots. Portsmouth is in our area too, around 9 miles away.
Here we cover the PO36 postcode area for kitchen extract cleaning. Kitchen extract cleaning is available to premises on Station Road, High Street and Wrax Road and nearby roads. With the A3055 close by, Brading is simple for us to get to at any hour. We also cover the places around Brading: Yarbridge (1 mile south), Morton (1 mile south-west), Adgestone (1 mile south-west), Yaverland (1 mile south) and Gaskins (1 mile north-east). We also work in nearby towns such as Newport (7 miles west), Ryde (3 miles north), Cowes (9 miles north-west), Shanklin (4 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). For island and remote sites, the visit takes a little more planning, so let us know when you get in touch.
What’s near Brading
Typical jobs here are in premises near The Bugle Inn and Sandown Bay Academy. Brading has its own railway station: Brading station. A little further out are Sandown Castle (1.5 miles south) and Brading Waxworks (within half a mile north). Open spaces near Brading include Brading Marshes RSPB reserve and Brading Down.
What happens on the day
The first job on site is protection: floors, worktops and anything near the work are covered. Then we make the system safe and start. The work on site takes one visit for most kitchens, while large or complex systems may need more than one, and we clear up before we go. A quick note on how to find the site and where to park makes a visit to Brading run smoothly.
- First comes a survey of the whole system, by photos or a visit.
- Grease readings are taken at set points and you get a fixed quote.
- With the kitchen closed and equipment off and cool, the area is sheeted.
- We clean the canopy, plenum, filters, ducts, risers, fan and discharge.
- Finally the system is re-tested and photographed, and the certificate and report follow.
Before we arrive
- Move anything stored near the system
- Make sure someone can let us in and lock up afterwards
- Allow time for equipment near the work to be turned off and cool down
How to get a quote
For a fixed quote, phone us on 0345 646 2711, or send details by email and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. You will usually have a quote within one working day.
Related advice
How we price kitchen extract cleaning
The diagnosis comes before the price. The main factors are:
- How many systems or sites are involved
- Where the site is and how we reach it
- What state the system is in
- A single visit or a regular plan
Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Asking for a quote
We can often survey from photos. Try to include:
- The site address and the type of premises
- Your last certificate, test record or report
- Your opening hours and when the area is out of use
- Wide pictures of the system and the area around it
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.