Isle of Wight · Extract fan repair and replacement
Extract fan repair and replacement in Morton, Isle of Wight
Extract fan repair across Morton and nearby, timed so the site keeps working and signed off in writing with photos.
- A motor that trips out or overheats
- A fan shaking on its mountings
- An old fan that needs replacing
Why act early in Morton
In Morton, as elsewhere, an extract fan may well sit outside on a wall or roof, where a rattle or a whine can be heard beyond the kitchen. Dealing with the fault brings the noise back down before neighbours notice. It’s worth booking a check, because nobody sees inside a duct day to day.
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before any work starts.
Why Morton businesses choose us
- We diagnose before we treat
- A written report with photos after each visit
- Full insurance on every job
- In business since 2009
How we handle extract fan repair in Morton
Before anything is ordered, we diagnose. The motor, drive, impeller, bearings and mounts are all checked and the speed control too. After that, you get a fixed price for what’s needed. If you’re dealing with a motor that trips out or overheats and a worn or slipping fan belt, we can put it right.
A callout to a small place like Morton goes better when we know what we’re looking at: a photo of the fan, the details on its label and the access arrangements help us plan.
Insurers, fire officers and environmental health officers all look at records. That’s why every job is written up in a report with photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Place
- Morton (PO36)
- Wider area
- Isle of Wight
- Paperwork
- Report and pictures after the visit
- Quote
- Fixed quote, normally within a working day
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Other services in Morton
What we do, step by step
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool before we start, and floors and nearby surfaces are sheeted. On site, it takes anything from an hour or two to a full visit, depending on the fault. If you can send pictures, we can arrive in Morton knowing what to expect.
- A visit is booked, in the evening or overnight if that suits.
- We isolate the extract and open the fan housing.
- We inspect every moving part and the fixings.
- You hear whether repair or replacement makes sense, with a fixed quote.
- The fan is repaired or replaced, then checked running.
Preparing for the visit
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Let us know when the site is closed or quiet
- Find the previous report, if there is one
Getting a quote
Some systems can be priced from pictures; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Related advice
What extract fan repair cannot fix
We’ll always give you a straight diagnosis, so here’s what this work can’t put right:
- An extract system that was undersized from the start
- Faults in the building’s electrical supply, which need an electrician
- Grease throughout the ductwork, which needs a full TR19 clean
If in doubt, phone us on 0345 646 2711 or use the quote form and we will say what we think.
What the work covers
- Kitchen extract fans
- Belts and pulleys
- Bearings
- Roof and wall fans
- Fan housings
- Fan motors
Questions from Morton
Can you come out to a failed extract fan in Morton out of hours?
Morton is covered, and our emergency callout runs 24/7. Call 0345 646 2711 and tell us what the fan is doing, or not doing. If you can, stop cooking until the fan is checked.
Can you work in Morton outside opening hours?
Yes, evening, overnight and weekend work is normal for us. That way a site in Morton does not have to lose a day’s trading. Just call us on 0345 646 2711 or use the quote form with your opening times and we’ll plan around them.
What accreditations do you have?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
Can you repair a fan rather than replace it?
It depends on the fault. We diagnose first and tell you whether a repair is realistic, then give you a fixed quote.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before any work starts, and anything we remove is contained. At the end, the area is cleaned down.
What’s TR19?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It sets out inspection, cleaning and record keeping and expects a risk-based approach.
Do you replace extract fans as well as repair them?
Yes. Where a fan is beyond repair, we replace it with one suited to the duct and the kitchen, and you get a fixed quote first.
Between visits
After the visit, a few habits help the work last:
- Write down when the fan misbehaves
- Make sure every filter is in place and clean
- Tell us about a new rattle or whine straight away
- Get a noisy fan checked rather than slowed down
Before we leave, the fan is run and checked. You’ll hear what we found and what we did along with anything else that needs watching.
Noise is usually the first sign of a fan problem. Booking a check at this stage keeps it a planned job rather than an emergency during service.
Managing agents and facilities teams in Morton
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we will send a fixed quote.
Part by part
Motors and bearings
A grinding or rumbling noise often means worn bearings. We find out whether the bearings or the motor is at fault before recommending a fix.
Belt-driven fans
In a belt-driven fan, the motor drives the impeller by belt. Belts wear, stretch and slip, so we check the pulleys and bearings as well.
Extract fan repair in Morton: local notes
The coast is only about 1 mile from Morton. A fan exposed to sea air needs its fixings and housing checked more often than one inland. Food Standards Agency data counts about 19 restaurants, cafés and canteens and about 4 sandwich bars and takeaways within 1.5 miles or so of the middle of Morton. A kitchen with a dead extract fan gets hot and smoky fast, and kitchens like these feel it at once. Food hygiene inspections in Morton are the job of Isle of Wight council’s environmental health team. Food hygiene rules expect food premises to have suitable and sufficient ventilation. So a failed fan is worth fixing before the next service, not the next month.
If you cook near Brading station, long trading hours wear fan belts and bearings, so noise and vibration are worth reporting early. Holidays are the time to replace a tired kitchen fan at schools such as Brading Church of England Controlled Primary School, rather than mid-term. If you run a church or community hall kitchen, near St. Mary's Church or elsewhere in Morton, an extract fan that rarely runs can seize or fail when it’s needed.
Morton is about 1 mile north-east of Sandown, in the Isle of Wight. Anywhere in PO36, we cover extract fan repair for commercial sites. Our the Isle of Wight coverage runs to 125 places, Morton among them. There’s also a page for Portsmouth, about 10 miles away.
Work in PO36 is surveyed, quoted and booked the same way as anywhere else. Extract fan repair is available to premises on New Road, Wrax Road and Morton Road and the roads around them. With the A3055 close by, Morton is simple for us to get to for extract fan repair. Close by, we work in Yarbridge (1 mile north-east), Brading (1 mile north-east), Adgestone (1 mile west), Yaverland (1 mile south-east) and Sandown (1 mile south-west). Within a short drive, we also cover Newport (7 miles west), Ryde (4 miles north), Cowes (9 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). For island and remote sites, a little more planning is needed, so mention it when you ask for a quote.
Near you in Morton
Typical jobs here are in premises near Sandown Bay Academy, The Bay Church of England School and The Bugle Inn. For rail, the closest station is Brading station, about 0.6 miles north-east of the centre. A little further out are Sandown Castle (1.1 miles south) and Brading Waxworks (0.5 miles north). Not far away are Brading Marshes RSPB reserve and Brading Down.
What staff can safely do
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.