Kent · Extract fan repair and replacement
Extractor fan repair in Boyden Gate
Our technicians work in Boyden Gate on extract fan repair. Fixed quotes, work around your opening hours and photo reports on every job.
- A belt-driven fan that squeals
- A humming noise from the fan motor
- A fan that keeps cutting out
Extract fan repair for kitchens and businesses in Boyden Gate
The extract fan is what pulls smoke, heat and steam out of the kitchen. Once it turns noisy, sluggish or stops altogether, the cooking area soon fills with heat and fumes. Our engineers track down the fault and fix it, by repairing the fan or replacing it. Typical jobs include an extract fan that has stopped working and a fan that whines, hums or grinds, on belts and pulleys, fan motors and roof and wall fans.
In a small place like Boyden Gate, fans are often on an outside wall or roof, open to wind and rain. That, with the grease, is hard on motors and bearings.
Nothing is signed off by word of mouth: a dated report with photos of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Location
- Boyden Gate (CT3)
- Region
- Kent
- Records
- Written report with photos
- Price
- A fixed price before work begins
- Hours
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
How the visit works
Before we leave, we walk the area with whoever is on site. Anything we couldn’t reach or that needs attention is pointed out there and then, and it goes on the report too. The visit takes a few hours on site, depending on the fault and the access to the fan. Somewhere like Boyden Gate, lanes, gates and parking are worth mentioning in advance.
- We start with the symptoms, such as rattling, humming, slow running or a fan that won’t start.
- Power to the fan is isolated before we open the housing.
- The impeller, bearings, belts or drive, motor and mounts are all inspected.
- You get our diagnosis and a fixed quote to repair or replace.
- The repair or replacement is carried out and the fan is run and checked.
Getting ready for the visit
- Make sure equipment near the work can be switched off and left to cool
- Tell us where we can park and unload
- Let us know when the site is closed or quiet
Ask for a quote
Need a price for extract fan repair? Please call us on 0345 646 2711 or drop us a line and tell us about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
Advice
Common problems we fix in Boyden Gate
Fan bearings don’t last for ever, especially in a hot, greasy airstream. As they wear, you hear a whine or a rumble and a seized bearing stops the fan.
What we’re most often called out for:
- A fan shaking on its mountings
- An extract fan that has stopped working
- An old fan that needs replacing
- Weak extraction and a smoky kitchen
If you look after a church or hall kitchen near Church of St Mary the Virgin, or anywhere in Boyden Gate, test the extract fan before a big event rather than on the day.
What your quote should include
- Whether the quote is based on a survey or pictures
- Whether the work can be done while the site is closed
- Whether inaccessible sections are listed on the report
- Whether VAT is included
Other services in Boyden Gate
Your questions about extract fan repair in Boyden Gate
Who carries out food hygiene inspections in Boyden Gate?
That’s Canterbury City council, whose environmental health officers carry out food hygiene inspections in Boyden Gate. Inspections are risk-based, so a visit can come at any time, including the week a fan stops.
Does the sea air around Boyden Gate make a difference to extract fan repair?
It can. Boyden Gate is within about 3 miles of the coast, and salt air speeds up corrosion. Outdoor metalwork near the sea is worth inspecting at each visit.
What should go in our maintenance log?
Visit reports, certificates and your in-house cleaning logs. They’re what an insurer, fire officer or EHO may ask for, so keep them together and easy to find.
Will the kitchen have to stop cooking while you work?
While we’re working on the fan, the extract is isolated. We can come when the kitchen is closed so service carries on as normal.
What if our extract fan fails during service?
Call our 24/7 emergency line. We’ll take the details and get an engineer to you as quickly as possible.
Can you set up regular visits?
Yes. Send details of the systems and how they’re used and we will propose a schedule with a fixed quote.
What happens to the waste?
It leaves the site with us at the end of the visit. During the work, it’s contained so the area stays clean.
Is there a survey before the work?
Yes. For many sites, pictures and a few details are enough, and larger or hidden systems get a visit.
Between visits
Aftercare is simple, and it helps at the next visit:
- Note when the fan trips or cuts out
- Keep the emergency number where staff can see it
- Tell us about a new rattle or whine right away
- Make sure the fan is cleaned with the rest of the system
If the fan had grease on it, the rest of the system almost certainly does too. We can book a TR19® clean of the whole extract, with a certificate and photo report.
A fan that is starting to make noise is giving you a warning. Booking a check at this stage keeps it a planned job rather than an emergency during service.
Leave it or put it right?
Some kitchens run a noisy fan on a lower speed to cut the noise. That reduces extraction without fixing anything, and the fault carries on developing. A proper diagnosis in Boyden Gate gets to the real cause. Equipment tucked in a roof space or outbuilding near Boyden Gate rarely gets looked at unless someone books it.
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
Why us?
- Out-of-hours work and a 24/7 emergency line
- Survey first, then a fixed quote
- Fixed quotes from a survey or photos
- A written report with pictures after each visit
Take a look at what affects the cost or our accreditations and certificates.
When something else is needed
Before booking, it helps to know what’s not included:
- Cooking smells reaching neighbours, which may need odour control
- Faults on the gas side of an interlock system, which need a Gas Safe registered engineer
- Grease build-up in the rest of the extract system
If you’re not sure, just ring 0345 646 2711, or email photos and we’ll give you a straight answer.
What we work on in Boyden Gate
- Roof and wall fans
- Fan housings
- Bearings
- Kitchen extract fans
- Belts and pulleys
- Fan motors
Landlords, agents and facilities managers
We also work for facilities teams across offices, schools and healthcare across Kent. Work can be phased by floor, building or site around the people who use them.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
What extract fan repair looks like in Boyden Gate
The coast is only about 3 miles from Boyden Gate. Motor mounts, bolts and housings on outdoor fans corrode faster close to the coast. In Boyden Gate, food businesses are inspected by environmental health officers from Canterbury City council. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. Getting the fan running again is the priority. At about 56 miles from central London, Boyden Gate sits well inside the area we cover. The visit is fixed around your opening hours, not ours.
Holidays are the time to replace a tired kitchen fan at schools such as Chislet Church of England Primary School, rather than mid-term.
Boyden Gate is about 3 miles south-east of Herne Bay, in Kent. Wherever you are in the CT3 postcode area, we cover extract fan repair for commercial sites. Boyden Gate is one of 922 places in Kent where we work for commercial clients. You can also see our page for Maidstone, about 29 miles away.
All of CT3 is covered for extract fan repair, from busy streets to back roads. We cover sites on Forge Lane and Church Lane and nearby roads. We also cover the places around Boyden Gate: Chislet (1 mile south), Highstead (1 mile north-west), Chitty (1 mile south-east), Hollow Street (1 mile south) and Old Tree (1 mile south-west). Further out, we also cover Canterbury (7 miles south-west), Margate (9 miles east), Dover (15 miles south), Ramsgate (10 miles east), Broadstairs (10 miles east) and Whitstable (7 miles west).
Local landmarks in Boyden Gate
Around Boyden Gate, our work takes us to kitchens and buildings near Hog & Donkey pub and Grove Ferry Picnic Area. The closest station to Boyden Gate is Herne Bay station, about 3.4 miles west of the centre. A little further out are St Martins Hospital (6 miles south-west). For a walk, there’s West Blean and Thornden Woods.
Part by part
Motors and bearings
If the motor runs hot or keeps tripping, something’s wrong. The cause might be grease restricting the airflow or the motor may be near the end of its life.
Belt-driven fans
Belt-driven fans have a motor that turns the impeller through belts and pulleys. Belts wear, stretch and slip, so we check the pulleys and bearings as well.