Kent · Extract fan cleaning
Extract fan cleaning in Wolverton, Kent
Professional extract fan cleaning in and around Wolverton, booked around your opening hours and finished with a written report and pictures.
- Vibration from an unbalanced impeller
- A fan that has never been cleaned
- Grease around the motor and its mounts
Extract fan cleaning in Wolverton
In Wolverton, as everywhere we work, the fan follows a set routine: isolated first, then opened, scraped and degreased. Your report shows the impeller as we found it and as we left it. Typical jobs include vibration from an unbalanced impeller and hot, greasy smells near the fan, across discharge points, fan housings and centrifugal fans.
For a kitchen in or near Wolverton, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
We are CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Place
- Wolverton (CT15)
- Wider area
- Kent
- Reporting
- Certificate and photo report
- Price
- A fixed quote up front
- Working hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
For landlords and multi-site operators
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.
Records are where multi-site compliance often slips. Each visit produces a dated report with photos, so you can show an insurer or inspector what was done at each site.
Looking after it afterwards
A little care between visits keeps the system in better shape. We recommend:
- Don’t store items in front of the fan’s access point
- Watch for grease marks around the outlet
- Note any drop in extraction at the canopy
- Keep the fan on whenever the range is lit
If the fan needs more than a clean, we’ll say so plainly. Fan repair and replacement are services we offer too, so you have one point of contact.
Keep the route to the fan clear. A fan that can be reached safely is a fan that gets cleaned, whether it’s on a roof, in a ceiling or on a wall.
Wolverton kitchens: local notes
At about 3 miles from the coast, Wolverton is close enough for sea air to matter. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. In Wolverton, food businesses are inspected by environmental health officers from Dover council. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after photos from each clean are a simple way to show the extract is in hand. Fire safety in Wolverton falls to Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Wolverton is Buckland Hospital, about 2.4 miles east. For schools such as Astor College for the Arts, kitchen extract cleaning is normally booked for the holidays, when the canteen is closed.
Wolverton is about 3 miles west of Dover, in Kent. For extract fan cleaning in and around Wolverton, please ring 0345 646 2711 or email us for a fixed quote. We work across South East England and London, including Wolverton. 922 places in Kent are on our list, large and small. We also work in Maidstone, around 32 miles away.
Our technicians cover all of the CT15 postcode area for extract fan cleaning and the roads nearby. If you need extract fan cleaning at premises on Alkham Valley Road and Wolverton Hill or anywhere close by, we can help. Close by, we work in Ewell Minnis (1 mile north-west), Alkham (1 mile south-west), Chalksole Green (1 mile west), South Alkham (1 mile south-west) and Kearsney (1 mile east). Within a short drive, we also cover Canterbury (12 miles north-west), Dover (3 miles east), Folkestone (5 miles south-west), Deal (8 miles north-east), Hythe (8 miles south-west) and Tower Hamlets (3 miles east).
Near you in Wolverton
Typical jobs here are in premises near Sladden Wood, among other places. The nearest railway station is Kearsney station, roughly 1.5 miles north-east of the centre. Well-known places in the area include Dover Castle (3.8 miles east) and Crabble Corn Mill (1.9 miles east). Not far away are Sugar Loaf Hill and Dover Western Heights.
What your team can do, and what needs us
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. That’s our job.
Keep a record of what your team does. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
Signs you need extract fan cleaning in Wolverton
Fans that are hard to reach are often the ones that get missed. A fan that has never been cleaned can be heavily coated, and the report will show it.
It’s time to book a visit if you see:
- A smell of hot grease from the extract
- A heavily greased fan housing
- A fan that no longer moves enough air
- Fat spreading onto the roof or wall by the fan
A hall kitchen that only cooks for events, whether near Church of St Anthony the Martyr or elsewhere in Wolverton, still needs its extract cleaned, just less often.
What your quote should include
- Whether the work can be done while the site is closed
- How areas they cannot reach will be recorded
- What insurance they carry
- Whether VAT is included
Places near Wolverton
Also in Wolverton
How the job changes from site to site
Impellers and blades
The blades of the impeller do the work, and it collects grease unevenly. An uneven coating throws it off balance, so it’s cleaned carefully blade by blade.
Inline duct fans
An inline fan can be easy to forget because it’s out of sight. The survey makes sure it’s part of the clean.
Common questions in Wolverton
Do you work overnight in Wolverton?
Yes, nights and weekends are routine for us. That way a site in Wolverton doesn’t have to lose a day’s trading. When you give us a ring on 0345 646 2711, or send details by email, mention when the site is quiet.
Which fire authority looks after Wolverton?
That is Kent Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Is the fan isolated during cleaning?
The fan must be isolated before anyone touches it. We clean out of hours, in the evening, overnight or at weekends, so cooking is not affected.
What if the fan needs more than a clean?
Cleaning removes grease, but it can’t fix worn parts. Where the fan needs repair or replacement, we can do that too, with a fixed quote first.
Who is the responsible person?
The Fire Safety Order 2005 calls them the responsible person: normally the employer or whoever controls the premises. In shared or managed buildings, a landlord, facilities manager or managing agent can share the duty.
What do you need from me for a quote?
A short description and a few pictures, with the address and opening hours. We will ask for anything else we need.
Does a TR19 kitchen extract clean cover the fan?
Yes. The whole system is cleaned, from the canopy to the discharge, and the fan is a key part of it, so it’s cleaned too.
How long is a fan clean?
Size, access and build-up all affect it. As a guide, it takes an hour or two for one fan, longer when it’s hard to reach.
When it’s something else
We will always give you a straight diagnosis, so here’s what this work cannot put right:
- A faulty speed controller or isolator
- A fan that was never right for the kitchen
- A cracked or broken impeller (it needs replacing)
Not sure which it is? You can call 0345 646 2711 or drop us a line and we will tell you honestly before booking.
What we work on in Wolverton
- Discharge points
- Axial fans
- In-line fans
- Roof-mounted fans
- Fan housings
- Centrifugal fans
What we do, step by step
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool before any work starts, and floors and nearby surfaces are sheeted. On site, it takes an hour or two for most single fans. Visits to a village like Wolverton are booked in advance, at a time that suits whoever runs the site.
- Diagnosis first: we look for grease, noise and vibration.
- Once isolated, we open the fan up.
- The impeller is cleaned blade by blade so it runs balanced.
- Housing, outlet and the area around the motor are cleaned.
- We run the fan and note its condition in the photo report.
Preparing for the visit
- Find the previous report, if there is one
- Let us know about permits to work or site inductions
- Clear loose items from the work area
Get a fixed quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.