Kent · Extract fan cleaning
Extract Fan Cleaning in Ripple
Extract fan cleaning across Ripple and nearby, timed so the site keeps working and finished with a written report and photos.
- Grease escaping from the fan outlet
- Less air being pulled from the kitchen
- A motor area thick with grease
Extract fan cleaning in Ripple, done properly
In Ripple, as everywhere we work, the fan follows a set routine: we isolate it, open the housing, scrape the impeller and degrease the lot. Your report shows the impeller as we found it and as we left it. If you have hot, greasy smells near the fan and thick grease on the impeller and casing, we can put it right, from axial fans, fan housings and discharge points onwards.
In a village or hamlet like Ripple, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
It’s worth checking any contractor’s accreditations. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Ripple (CT14)
- Region
- Kent
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Extract fan cleaning in Ripple: the local picture
At about 3 miles from the coast, Ripple is close enough for sea air to matter. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. Food Standards Agency records include about 5 pubs and bars in and around Ripple, up to about a mile and a half out. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. Ripple is covered by Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
A hospital like Royal Victoria Hospital, about 5.5 miles south-west, is the kind of site where a kitchen may cook for patients, staff and visitors all day. Term dates shape school work: for a school like St Mary's Catholic Primary School, an extract clean fits neatly into a half-term or summer break. If your kitchen is in a listed or historic building, like the houses around Ripple (Walmer Castle is about 1.9 miles east), fitting access panels needs care.
Ripple is about 2 miles south-west of Deal, in Kent. Ripple gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Across Kent, we cover 922 places, Ripple among them. You can also see our page for Maidstone, about 36 miles away.
All of CT14 is covered for extract fan cleaning, from the main roads to the quietest streets. If you need extract fan cleaning at premises on Mongeham Road, Sunnyside Close and Sutton Lane or a nearby road, we can help. Neighbouring places we cover for extract fan cleaning include Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Larger places within reach include Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).
Near you in Ripple
Around Ripple, our work takes us to kitchens and buildings near Goodwin Academy. The closest station to Ripple is Walmer station, about 1.1 miles east. Nearby you’ll also find Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
Managing agents and facilities teams in Ripple
Records are where multi-site compliance often slips. Each visit produces a dated report with photos, ready to show insurers, fire officers or EHOs.
We also work for facilities teams across offices, schools and healthcare across Kent. Larger estates can be phased building by building around the people who use them.
Nearby places to Ripple
Other services in Ripple
How we price extract fan cleaning
The diagnosis comes before the price. The main factors are:
- Whether several sites go on one quote
- How easy every part is to reach
- Site rules, permits and inductions
- Where the site is and how we reach it
The cost depends on the size of the system, the condition it’s in and access to every part of it. You get a fixed price before work begins, so there are no surprises.
Helping us quote
Before you ask for a quote, gather:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any symptoms, from odd noises to smells or leaks
- When the site is open and when it’s quiet
- Any access panels or hatches you can see
For extract fan cleaning in Ripple, call 0345 646 2711, or email photos. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. A fixed quote usually follows within one working day.
What your team can do, and what needs us
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, which is where we come in.
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.
FAQs for Ripple
Is extract fan cleaning any different in a coastal place like Ripple?
It can. Being within about 3 miles of the sea means more corrosion on metalwork in Ripple than inland. Corroded fixings and housings are noted on the report so they can be dealt with.
Which fire service covers Ripple?
Ripple is in the area of Kent Fire and Rescue Service. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Can one contract cover all our sites?
Yes. Our area covers London and the South East, so we can schedule a run of sites on one programme. Every site has its own report.
Can we book visits on a schedule?
Yes. Scheduled maintenance plans are part of what we do, set at the interval the system needs. Each report recommends when the next visit should be.
Do you survey before quoting?
Yes. For many sites, photos and a few details are enough, while bigger or harder-to-see systems are surveyed on site.
Are you insured?
Yes. Full insurance covers our work and have been trading since 2009.
Do you have a 24/7 line?
Yes. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we’ll advise on what to do next.
What happens to the waste?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. None of it is left on site.
How the job changes from site to site
Roof-mounted fans
Grease can escape from a roof fan onto the surrounding surface and we check the area around the outlet. Heavy staining is noted on the report.
Kitchens with long cooking hours
A fan in a long-hours kitchen runs for most of the day, which means grease and wear add up quickly. Regular cleans help it keep going.
Between visits
Think of this as the after-treatment advice, short and simple:
- Watch for grease marks around the outlet
- Book the fan into every full TR19 clean
- Keep the fan on whenever the range is lit
- Flag smoke lingering at the canopy
If the fan needs more than a clean, we will say so plainly. We also repair and replace extract fans, so you have one point of contact.
Keep the whole system on its cleaning cycle. Regular full cleans keep the fan from building up heavy deposits, in line with BESA guidance.
The process
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. From there, it takes a few hours where there are several fans or heavy deposits. The timing of a visit to Ripple is set by you, and the travel is our side of the planning.
- Diagnosis first: we look for grease, noise and vibration.
- With the fan isolated, the housing is opened.
- The impeller is cleaned blade by blade so it runs balanced.
- We clean the casing, the outlet and around the motor.
- The fan goes back into service with a report on its condition.
Getting ready for the visit
- Let us know when the site is closed or quiet
- Arrange a key holder or contact on site
- Mention any locked doors, roof access or ceiling voids
Getting a quote
Quotes are quick. Send a few details and photos, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
What extract fan cleaning cannot fix
Not every problem is solved by extract fan cleaning, and we’d rather say so up front. It does not solve:
- A faulty speed controller or isolator
- A cracked or broken impeller (it needs replacing)
- An undersized fan that cannot cope
Not sure which it is? You can call us on 0345 646 2711, or email photos and we will tell you honestly.
Where we work
- Fan housings
- Roof-mounted fans
- Axial fans
- In-line fans
- Centrifugal fans
- Discharge points