Kent · Ductwork cleaning
Ripple ductwork cleaning
For ductwork cleaning in Ripple, one call is all it takes: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Fat dripping from the ductwork
- Readings above 200 microns from a grease thickness test
- Duct runs that cannot be reached
In-house cleaning or a specialist?
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
How we handle ductwork cleaning in Ripple
Each extract duct we take on in Ripple goes through the full routine: readings at set points, heavy grease scraped out by hand, then degreasing to suit the deposit. Readings are taken again afterwards and photos go into your report. Common call-outs are for sections of duct with no access panels and smells of old cooking grease from the ductwork, across multi-storey ducts, vertical risers and bends and junctions.
Work in a small place like Ripple starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
The report is your system’s health record: a dated account with photos of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Place
- Ripple (CT14)
- Region
- Kent
- Reporting
- Certificate plus before-and-after pictures
- Price
- Fixed quote, typically within a working day
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
What affects the cost of ductwork cleaning
There’s no set price list, because sites vary so much. What we look at:
- Whether we need access equipment or extra panels
- Any permits to work or inductions
- The number of sites or systems
- One-off work versus a regular cycle
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we will explain each part.
What we need to know
To help us quote quickly, please include:
- When the site is open and when it’s quiet
- Any access panels or hatches you can see
- Wide photos of the system and the area around it
- Any symptoms, from odd noises to smells or leaks
Quoting starts with a diagnosis, from your photos and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work so you know the cost before we start.
Between visits
Think of this as the after-treatment advice, in brief:
- Have the grease measured if cooking hours go up
- Diarise the next duct clean
- Keep grease filters clean and fitted whenever you cook
- Leave a way through to the access panels
The report names every part of the duct that couldn’t be reached and why. We can fit access panels so those sections are cleaned next time.
Keep to the cleaning interval on the report. If the kitchen starts cooking longer hours, the interval may need to shorten, and grease thickness testing will show it.
Ripple: your questions answered
Can you come to Ripple after we close?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Your opening times are the first thing we ask for.
Which fire authority looks after Ripple?
Ripple is in the area of Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We have been trading since 2009 and we’re fully insured.
Will we have to shut during the visit?
Not usually. We need the work area to ourselves while we are on site, so we book a time when it would be closed anyway.
What do you need from me for a quote?
The site address, the type of premises and your opening hours, plus photos of the system and your last certificate or report if you have one.
Who is the responsible person?
In the words of the Fire Safety Order 2005, it’s the responsible person. It’s normally the employer, or whoever controls the building, and in shared buildings more than one person can have duties. If you are not sure, check your lease and fire risk assessment.
What does TR19 mean?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not law, but it’s the benchmark.
How long will the duct clean take?
Allow a shift or more, depending on the length of the runs and the number of access points. We will confirm the time when we quote.
Signs you need ductwork cleaning in Ripple
Many ducts don’t have enough access panels. Stretches with no way in may never have been touched, and the grease there keeps building out of sight.
Most sites get in touch after spotting something like this:
- A duct nobody has opened in years
- Thick crusts of old grease along the duct
- Heavy grease at the base of a riser
- Fat dripping from the ductwork
If your kitchen is in a listed or historic building, like the houses around Ripple (Walmer Castle is about 1.9 miles east), fitting access panels needs care.
What to look for in a quote
- Proof of insurance
- How VAT is shown on the quote
- What records you’ll receive afterwards
- Proof of accreditation you can verify
Nearby places to Ripple
Other services in Ripple
Grease, kitchens and Ripple
The coast is only about 3 miles from Ripple. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. Look up Ripple on the FSA’s food hygiene register and you will find about 5 restaurants, cafés and works canteens and about 5 sandwich bars and takeaways within roughly a mile and a half of the centre of Ripple. Wherever those kitchens cook under a canopy, the horizontal runs and risers need cleaning as well as the hood. Ripple is covered by Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
Healthcare kitchens, like those at hospitals such as Royal Victoria Hospital (about 5.5 miles south-west), often cook for long hours, which puts them in BESA’s heavier-use bands. If you run a church or community hall kitchen, near Church of St Mary the Virgin or elsewhere in Ripple, its extract still collects grease from every lunch and event.
Ripple is about 2 miles south-west of Deal, in Kent. Ripple gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Across Kent, we cover 922 places, and Ripple is one of them. Our Maidstone page covers sites nearby (36 miles or so).
Postcode districts we cover here for ductwork cleaning: CT14. Ductwork cleaning is available to premises on Mongeham Road, Sunnyside Close and Sutton Lane and nearby roads. Other places close to Ripple include Great Mongeham (1 mile north), Mill Hill (1 mile north-east), Northbourne (2 miles north-west), Sholden Meadows (2 miles north) and Sholden (2 miles north-east). Within a short drive, we also cover Canterbury (13 miles north-west), Margate (12 miles north), Dover (5 miles south-west), Folkestone (12 miles south-west), Ramsgate (10 miles north) and Broadstairs (12 miles north).
Around Ripple
Locally, jobs take us to businesses close to Goodwin Academy. The nearest railway station is Walmer station, about 1.1 miles east. Other landmarks nearby include Royal Victoria Hospital (5.5 miles south-west) and Kent Museum of the Moving Image (2.4 miles north-east).
What the work involves, part by part
Multi-storey and shared buildings
Long ducts in larger buildings can mean several visits. We agree a sequence that suits the building, out of hours where possible.
Bends and transitions
The join where the canopy meets the duct is a common hotspot. We clean it from the canopy side or through a nearby panel.
When it’s something else
To be straight with you, some problems need a different fix:
- Faulty fire dampers
- Sections that can’t be reached safely without new access (those are recorded, and panels can be fitted)
- Leaking duct joints that need repair
Not sure which it is? You can phone us on 0345 646 2711 or email us and we’ll tell you honestly.
Parts of the system we cover
- Bends and junctions
- Access panels
- Attenuators
- Vertical risers
- Horizontal duct runs
- Multi-storey ducts
What we do, step by step
There’s very little for your team to do on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Afterwards, the area is left tidy and the written report follows. In a small place like Ripple, the journey is planned ahead and the visit arranged around the site’s hours.
- We trace the duct and find every way in.
- Grease thickness is measured at set points.
- Once the kitchen has closed, we protect the area and open the panels.
- Thick grease is scraped out, then the runs and risers are degreased.
- Panels are closed, readings and pictures repeated, and unreachable sections recorded.
Getting ready for the visit
- Mention any parking or loading restrictions
- Let us know about permits to work or site inductions
- Have your last certificate or report to hand
Ask for a quote
For a fixed quote, call us on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. You will usually have a quote within one working day.