Kent · Extract fan cleaning
Extract fan cleaning in Breach, Kent
Extract fan cleaning for commercial sites in Breach and across Kent. CHAS, SafeContractor and ISO 9001, and fully insured.
- Weak extraction at the canopy
- A fan that has never been cleaned
- Grease escaping from the fan outlet
Extract fan cleaning in Breach, done properly
Cleaning removes grease, not wear. Anything that looks worn or damaged goes on the report, and we also repair and replace extract fans. You get an honest view of the fan’s condition. Common call-outs are for a fan that has never been cleaned and a fan motor running hot under a coat of grease, across in-line fans, roof-mounted fans and axial fans.
In a village or hamlet like Breach, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease.
Every visit ends with a written report and pictures, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Breach (CT4)
- Wider area
- Kent
- Paperwork
- Certificate and photo report
- Quotes
- Fixed quote, normally within a working day
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Breach kitchens: local notes
Fire safety in Breach falls to Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Environmental health officers from Canterbury City council inspect food businesses in Breach. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Acrise Place is about 3.4 miles south), access may need planning. Around Breach, as anywhere, we clean the parts you can’t see as well as the canopy you can.
Breach is about 5 miles north of Hawkinge, in Kent. For extract fan cleaning in and around Breach, please ring 0345 646 2711, or send details by email for a fixed quote. We work across South East England and London, Breach included. Breach is one of 922 towns, villages and districts in Kent where we work for extract fan cleaning. We also work in Maidstone, about 27 miles from Breach.
All of CT4 is covered for extract fan cleaning, from the main roads to the quietest streets. If your site is just outside Breach, we cover Lodge Lees (1 mile east), Denton (1 mile east), Wootton (2 miles south-east), Shelvin (2 miles east) and Selsted (2 miles south-east). Further out, we also cover Ashford (12 miles west), Canterbury (7 miles north-west), Dover (7 miles south-east), Folkestone (7 miles south), Whitstable (13 miles north-west) and Deal (11 miles east).
What’s near Breach
In Breach, that means kitchens and buildings near The Palm Tree Inn and Jumping Downs, among other places. The nearest railway station is Snowdown station, about 3.6 miles north-east. Open spaces near Breach include Cheriton Hill.
What extract fan cleaning cannot fix
In fairness, some problems need a different fix:
- A cracked or broken impeller (it needs replacing)
- Electrical faults in the fan’s supply or controls (an electrician’s job)
- A fan that will not start
Not sure which it is? You can call us on 0345 646 2711 or send us an email and we’ll tell you honestly.
What we work on in Breach
- Axial fans
- In-line fans
- Fan housings
- Roof-mounted fans
- Discharge points
- Centrifugal fans
Staff cleaning versus specialist work
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Multi-site and managed buildings
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements and we will come back with a fixed quote.
Why deal with it now?
An unbalanced fan gets worse, not better. It can wear the bearings and lead to failure and a kitchen cannot cook safely without extraction. A planned clean beats an emergency. If the system at a site near Breach fails, there may be nowhere nearby to move to.
The price reflects the work, not guesswork. That is why every job is surveyed first, and the price is agreed before any work starts.
Why Breach businesses choose us
- One number for every site across the South East and London
- CHAS and SafeContractor accredited, with ISO 9001
- We are fully insured
- A written report with photos after each visit
Read how cleaning jobs are priced and how to check a contractor.
Different parts, different methods
Kitchens with long cooking hours
Kitchens that cook 12 to 16 hours a day put the most grease through their fans. BESA guidance sets at least 3-monthly cleaning for that level of use, fan included.
Inline duct fans
Inline fans sit within the duct run, often above a ceiling. We get to them through the duct or casing, once they’re isolated.
Your questions about extract fan cleaning in Breach
Do you cover smaller places like Breach?
Yes. Breach is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Who would carry out a food hygiene inspection at a kitchen in Breach?
The local authority for Breach is Canterbury City council, and its environmental health team does the inspecting. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
What about areas you cannot get to?
The report shows them clearly. In ductwork, new access panels are often the answer, and we can fit those.
Do you have insurance?
Yes. We are fully insured, and the details are available on request.
Can you set up regular visits?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. The report from each visit recommends the next date.
Do you survey before quoting?
Yes. We always survey first, from your pictures and details, or with a visit where necessary. A fixed quote follows.
Can you come out in an emergency?
Yes. There’s a 24/7 emergency line for anything that can’t wait until a planned visit. Call us any time and explain what’s happened.
How far ahead should we book?
For planned work, earlier is better, especially if the next clean or test is due soon. Emergencies are different, because our line is open 24/7.
What else we do in Breach
How it works
There’s very little for your team to do on the day. Someone lets us in at the agreed time and shows us where everything is, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. Somewhere like Breach, lanes, gates and parking are worth mentioning in advance.
- We locate the fan and plan how to reach and isolate it.
- It’s isolated so it can’t run while we work.
- We scrape the heavy grease from the blades and housing.
- Blades, housing and surrounds are degreased with care around the electrics.
- It’s closed up, run, checked and photographed for the report.
How to prepare
- Dig out any earlier paperwork for the system
- Allow time for equipment near the work to be turned off and cool down
- Let us know how we reach the system, including roofs, risers and plant rooms
How to get a quote
Need a price for extract fan cleaning? Please ring 0345 646 2711 or drop us a line with a few details about the site. We’ll talk you through the work and send you a fixed quote before anything is booked.
Read more
Looking after it afterwards
Here’s the after-treatment advice, in brief:
- Keep access to the fan clear
- Keep records of every fan clean
- Look for grease stains near the discharge
- Make sure the fan is included each time
The area around the fan is left clean, with waste grease removed. On a roof or outside wall, we leave the surrounding area tidy.
Keep the whole system on its cleaning cycle. A fan cleaned with the rest of the system on time rarely gets badly coated, in line with BESA guidance.