Kent · Extract fan cleaning
Extract fan cleaning in Denton, Kent
Extract fan cleaning for Denton and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- A fan that hums, whines or rumbles
- A fan motor running hot under a coat of grease
- Hot, greasy smells near the fan
Extract fan cleaning in Denton, done properly
The fan is cleaned as part of every full TR19® Grease clean, but some fans need cleaning between full cleans, especially when it has started to vibrate or sound rough. A fan-only clean is recorded as exactly that. The work covers roof-mounted fans, discharge points and fan housings, and common reasons people get in touch are a fan that no longer moves enough air and thick grease on the impeller and casing.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
It’s worth checking any contractor’s accreditations. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Denton (CT4)
- Region
- Kent
- Reporting
- Certificate plus before-and-after photos
- Quote
- A fixed price before any work starts
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
When to call us in Denton
A greasy fan in Denton is fuel at the end of the duct. A fire in the duct can reach the fan and the grease around it and an overworked motor runs hotter.
If you notice any of these, it’s worth a diagnosis:
- Rough running from the extract fan
- A heavily greased fan housing
- A fan shaking on its mounts
- A motor area thick with grease
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Acrise Place is about 3.4 miles south-west), access may need planning.
Comparing quotes
- Whether they recommend a next date
- When they can work, and whether that’s outside your opening hours
- Exactly which parts of the system are covered
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
Leave it or put it right?
Vibration from an unbalanced impeller doesn’t stay small. It can wear the bearings and lead to failure, which may leave the kitchen without extraction. Cleaning it early is far less disruptive. Equipment tucked in a roof space or outbuilding near Denton rarely gets looked at unless someone books it.
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. You get a fixed price before any work starts, so you know where you stand.
Why choose Duct Doctor in Denton
- Every visit written up, with photos
- Survey first, then a fixed quote
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Out-of-hours work and a 24/7 emergency line
Take a look at how cleaning jobs are priced or our accreditations.
Landlords, agents and facilities managers
Whether it’s one building or many, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with pictures.
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept to a regular schedule.
Extract fan cleaning around Denton
Look up Denton on the FSA’s food hygiene register and you will find about 3 cafés, restaurants and staff canteens in Denton and the streets around it, up to about 1.5 miles out. Any of those kitchens with a canopy relies on a fan that gathers grease as it runs. The fire and rescue service for Denton is Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. Environmental health officers from Canterbury City council inspect food businesses in Denton. Extraction counts as kitchen equipment, so its condition can come up on the day. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
A hall kitchen that only cooks for events, whether near Church of St Mary Magdalene or elsewhere in Denton, still needs its extract cleaned, just less often.
Denton is about 6 miles north-west of Dover, in Kent. Wherever you are in the CT4 postcode area, we cover extract fan cleaning for commercial sites. Across Kent, we cover 922 places, Denton among them. We also work in Maidstone, about 28 miles from Denton.
Work in CT4 is surveyed, quoted and booked the same way as anywhere else. That includes premises on The Street and Canterbury Road and the roads around them. Other places close to Denton include Lodge Lees (1 mile west), Wootton (1 mile south-east), Shelvin (1 mile east), Breach (1 mile west) and Selsted (2 miles south). Larger places within reach include Ashford (13 miles west), Canterbury (8 miles north-west), Dover (6 miles south-east), Folkestone (7 miles south), Ramsgate (15 miles north-east) and Whitstable (13 miles north-west).
Local landmarks in Denton
Around Denton, our work takes us to kitchens and buildings near Jumping Downs and The Jackdaw Inn, among other places. For rail, the closest station is Shepherds Well station, roughly 2.7 miles east of the centre. Open spaces near Denton include Cheriton Hill.
FAQs for Denton
Do you work at weekends in Denton?
Yes. We work evenings, overnight and at weekends. It means the site in Denton keeps running as normal. Just call us on 0345 646 2711, or send details by email with your opening times and we will plan around them.
Can you get to a site in Denton?
Yes. Villages and rural sites across the South East are part of our work, Denton included. Let us know about access, parking and anything unusual about getting there when you book.
What paperwork do I get after a fan clean?
Photos, notes on condition and a recommended next date. Keep it with your maintenance log.
How much does extract fan cleaning cost in Denton?
It depends on the site, so we quote each one individually. For a quote, phone us on 0345 646 2711 or drop us a line and tell us about the site and its opening hours.
Should the extract fan be cleaned as part of TR19?
Yes, the fan is part of a full TR19® Grease clean. It’s isolated, opened and cleaned along with the canopy, plenum, filters, ducts and discharge.
Which accreditations do you hold?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’re fully insured and have been trading since 2009.
What about areas you can’t get to?
They’re marked on the report. In ductwork, new access panels are often the answer, and we can fit those.
What information do you need?
Just the basics: the address, the site type, your opening hours and how we reach the system. Photos and any previous paperwork make it quicker. Then ring 0345 646 2711 or use the quote form.
How the visit works
There are three stages on the day: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with photos. The middle part takes longest, and that takes a few hours where there are several fans or heavy deposits. Somewhere as small as Denton, the date and timings are agreed with you well before the day.
- The fan is found and its type, access and isolation checked.
- We isolate the power before opening the housing.
- We scrape the heavy grease from the blades and housing.
- The fan is degreased, taking care around the motor.
- We reassemble, run and photograph the fan.
Before we arrive
- Plan for cooking equipment or plant to be off before we arrive
- Mention any locked doors, roof access or ceiling voids
- Tell us the best time to work, such as after service or at a weekend
Get a fixed quote
There’s no standard price list, because every site is different. We look at your system first, from pictures or on a visit, then send a fixed quote. To start, call us on 0345 646 2711 or drop us a line.
Related advice
Also near Denton
What else we do in Denton
Honest limits
An honest diagnosis matters more to us than a booking, so here’s what extract fan cleaning won’t do:
- A faulty speed controller or isolator
- An impeller that’s bent or split
- A dirty duct upstream of the fan
If you’re not sure, just phone us on 0345 646 2711, or send details by email and we will give you a straight answer.
Parts of the system we cover
- Axial fans
- Centrifugal fans
- Fan housings
- In-line fans
- Roof-mounted fans
- Discharge points
In-house cleaning or a specialist?
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
How we price extract fan cleaning
The quote reflects the site in front of us. We take into account:
- The scale of the work
- Whether we need access equipment or extra panels
- One-off work versus a regular cycle
- The condition of the system
No two sites are the same, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
What we need to know
To help us quote quickly, send us:
- Any access panels or hatches you can see
- The times we could work without disrupting the site
- Your last certificate, test record or report
- Photos showing the whole system and its surroundings
Quotes are quick. Send a few details and pictures, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.