Kent · TR19 inspections and grease testing

TR19 inspections and grease testing in Breach, Kent

Looking for TR19 inspection in Breach? We diagnose first, fix the price and book the work around your hours, then sign off with a report and pictures.

  • Systems that need surveying before cleaning
  • Missing access panels found on survey
  • Confirming a clean reached the whole system

TR19 inspection for sites in Breach

What happens on the day

Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. The visit takes a morning or less for one kitchen, more where there are several systems. A few pictures of the system help us make the most of a visit to a place like Breach.

  1. We agree a time when the kitchen is closed or quiet.
  2. Every part of the system is examined, end to end.
  3. Grease readings are taken at set points using WFTT or DTT.
  4. Each test point and any access problems are photographed.
  5. We send a report setting out the readings, photos and next steps.

Preparing for the visit

  • Let us know when the site is closed or quiet
  • Allow time for equipment near the work to be turned off and cool down
  • Find the previous report, if there is one

Getting a quote

For TR19 inspection in Breach, give us a ring on 0345 646 2711, or send details by email. Let us know the site type and the opening hours, and send photos or your last report if you can. A fixed quote usually follows within one working day.

Ask for a quote

Related advice

TR19 inspection in Breach

Many insurers ask for proof that kitchen extract systems are cleaned and inspected to TR19®. Without it, a claim can be refused or reduced. Our TR19 audits give sites in Breach and across Kent a clear record of the system’s condition. The work covers post-clean checks, pre-clean surveys and access surveys, and people most often call us about insurance renewals needing proof of TR19 cleaning and confirming a clean reached the whole system.

In a small place like Breach, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.

The report is your system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.

Place
Breach (CT4)
Region
Kent
Reporting
Certificate plus before-and-after photos
Quotes
A fixed quote up front
Working hours
Evenings, overnight and weekends; 24/7 emergencies
Phone
0345 646 2711
Checked
30 October 2026
The Duct Doctor team standing beside their branded white and blue vans

FAQs for Breach

Who inspects food businesses in Breach?

In Breach, it’s Canterbury City council that carries out food hygiene inspections. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.

Can you work in Breach outside opening hours?

Yes, we can come after you close and finish before you open. That way a site in Breach does not have to lose a day’s trading. Let us know the hours you’re closed and we will book within them.

What information do you need?

Where the site is, what it is and when it’s open, plus photos of the system and your last certificate or report if you have one.

Is TR19 a legal requirement?

No. TR19® is a specification, not a statute. In practice, an insurer can refuse or reduce a claim without proof of TR19 cleaning, so it matters in practice.

Where does the waste go?

We contain it and take it with us. Grease, debris and waste water are collected as the work goes on, so it does not spread.

What do you do to protect the area?

By covering it before any work starts. We keep the work contained and clean down when we finish.

How much does TR19 inspection cost in Breach?

The cost depends on the size of the system, its condition, access and timing. Ask us for a fixed quote and we will normally reply within one working day.

Can you quote from pictures?

Yes, where the photos show enough. If not, a site survey comes first, then a fixed quote.

What staff can safely do

If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.

Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.

What we’re called out for in Breach

Grease is fuel. Flames from the range can be pulled into the canopy and travel through the ducts to other parts of the building. Knowing how much there is lets you act before it becomes a hazard.

Look out for these warning signs:

  • Surveys needed before quoting a full clean
  • Uncertainty over how often to clean
  • Checking the result of a recent clean
  • Extracts that may be over the 200 micron mean

A TR19® clean in Breach does not stop at the filters: the plenum, ductwork, fan and discharge are cleaned too.

What your quote should include

  • Whether the quote shows VAT
  • What hours they’ll be on site
  • Which accreditations they hold, and whether you can check them
  • Whether they’re fully insured

How to choose an extract cleaning contractor

TR19 inspection around Breach

About 58 miles out from central London, Breach is part of the South East area we work across. Evening, overnight and weekend visits are all possible. Fire safety in Breach falls to Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.

Acrise Place, about 3.4 miles south, is one of the historic houses near Breach; if you run event catering at a venue like that, cleans can be booked between functions.

Breach is about 5 miles north of Hawkinge, in Kent. Whether your site is in the middle of Breach or further out, we cover TR19 inspection for every kind of premises, from a single unit to a large public building. Our Kent coverage runs to 922 places, and Breach is one of them. Maidstone is in our area too, about 27 miles from Breach.

All of CT4 is covered for TR19 inspection, from busy streets to back roads. If your site is just outside Breach, we cover Lodge Lees (1 mile east), Denton (1 mile east), Wootton (2 miles south-east), Shelvin (2 miles east) and Selsted (2 miles south-east). Within a short drive, we also cover Ashford (12 miles west), Canterbury (7 miles north-west), Dover (7 miles south-east), Folkestone (7 miles south), Whitstable (13 miles north-west) and Deal (11 miles east).

Local landmarks in Breach

Around Breach, our work takes us to kitchens and buildings near The Palm Tree Inn and Jumping Downs and the streets around them. The closest station to Breach is Snowdown station, roughly 3.6 miles north-east of the centre. Open spaces near Breach include Cheriton Hill.

Map of Breach © OpenStreetMap contributors

Looking after it afterwards

Results last longer with the right care. We suggest:

  • Keep canopy edges and gutters wiped down
  • Keep access panels clear and unpainted
  • Never cook with filters missing
  • Store grease readings where your insurer can see them

You get a report with the grease readings, where they were taken and photos of each point. File it alongside your TR19 certificates.

Keep all TR19 records together so you can produce them quickly.

What a clean will not put right

Not every problem is solved by TR19 inspection, and we will tell you before we start. It won’t put right:

  • Design faults in the extract system
  • The legal duty, which stays with the responsible person
  • Fan breakdowns, which need a repair visit

If in doubt, call 0345 646 2711, or email photos and we will say what we think before you book.

Where we work

  • Insurer audits
  • Pre-clean surveys
  • Deposit thickness tests
  • Post-clean checks
  • Access surveys
  • Wet film thickness tests

Different parts, different methods

Canopy and plenum

We look over the canopy, inside and out, with readings where grease collects.

Restaurants, pubs and hotels

BESA’s minimum for heavy use of 12 to 16 hours a day is a clean every 3 months, and readings show whether that is enough.

Landlords, agents and facilities managers

From a single site to a large estate, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with pictures.

Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We’re happy to deal with either side, and the report can go to both.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London