Isle of Wight · Ductwork cleaning
Duct cleaning in Queen's Bower
Cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels for commercial sites in Queen's Bower and across the Isle of Wight. CHAS, SafeContractor and ISO 9001, and fully insured.
- Duct runs that can’t be reached
- Hardened, baked-on grease in long horizontal runs
- Stale grease odours from the duct
Queen's Bower kitchens: local notes
Sea air reaches Queen's Bower, which sits within about 2 miles of the coast. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. The FSA’s food hygiene register includes about 6 pubs and bars and about 3 hotels and B&Bs across Queen's Bower and its immediate surroundings (about a mile and a half). Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. It’s Isle of Wight council that sends environmental health officers to food businesses in Queen's Bower. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after photos from each clean are a simple way to show the extract is in hand.
If your kitchen is in a listed or historic building, like the houses around Queen's Bower (Haseley Manor is about 1.5 miles west), fitting access panels needs care. Bursars and site managers at schools such as Newchurch Primary School tend to book extract cleaning for when the kitchen is empty. A hall kitchen that only cooks for events, whether near All Saints' Church or elsewhere in Queen's Bower, still needs its extract cleaned, just less often.
Queen's Bower is about 5 miles south of Ryde, in the Isle of Wight. Sites in Queen's Bower get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. We cover 125 places across the Isle of Wight, from busy centres to quieter spots. We also work in Portsmouth, about 12 miles from Queen's Bower.
Here we cover the PO36 postcode area for ductwork cleaning. If your site is just outside Queen's Bower, we cover Skinner's Hill (1 mile north-west), Alverstone Garden Village (1 mile north-east), Alverstone (1 mile north-east), Lake (1 mile south-east) and Sandown (1 mile east). We also work in nearby towns such as Newport (5 miles north-west), Ryde (5 miles north), Cowes (8 miles north-west), Ventnor (4 miles south), East Cowes (8 miles north-west) and Oakfield (5 miles north). For island and remote sites, a little more planning is needed, so let us know when you get in touch.
Near you in Queen's Bower
Typical jobs here are in premises near Sandown Bay Academy and The Pointer Inn. Queen's Bower’s nearest station is Sandown station, roughly 1.4 miles east of the centre. A little further out are Sandown Castle (2 miles east) and Wight Aviation Museum (0.6 miles south-east). For a walk, there’s Brading Down and Alverstone Mead.
Ductwork cleaning in Queen's Bower
Not every duct has enough access panels. Where a section cannot be reached, TR19 expects it to be recorded on the report, and new panels can be fitted to reach it in future. It’s better to know than to assume. Common call-outs are for smells of old cooking grease from the ductwork and thick deposits at the bottom of a vertical duct, on access panels, vertical risers and horizontal duct runs.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
It’s worth checking any contractor’s accreditations. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Queen's Bower (PO36)
- Region
- Isle of Wight
- Paperwork
- Certificate and photo report
- Price
- A fixed quote up front
- When we work
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Aftercare tips
So the system stays in good health:
- Flag drips from the duct straight away
- Leave a way through to the access panels
- Ask us about extra access panels where sections can’t be reached
- Have the grease measured if cooking hours go up
When the duct is cleaned as part of a full TR19® Grease clean, a TR19 certificate is issued through the BESCA Vent Hygiene Elite portal. It records the date, the location and the technician.
Keep to the cleaning interval on the report. If the kitchen starts cooking longer hours, the interval may need to shorten, and grease thickness testing will show it.
How the job changes from site to site
Horizontal duct runs
Grease settles on the floor of a flat duct run. Thick deposits are scraped out by hand before degreasing, then the walls and roof are cleaned too.
Access panels
Every section of duct is cleaned through an access panel. Without them, parts of the duct can’t be reached and the report has to say so.
Questions from Queen's Bower
Does the sea air around Queen's Bower make a difference to ductwork cleaning?
It can. Salt air reaches Queen's Bower, which is within about 2 miles of the coast, and it speeds up rust. Outdoor metalwork near the sea is worth inspecting at each visit.
Do you cover smaller places like Queen's Bower?
Yes. Queen's Bower is within the area we cover across London and the South East. A survey first, from photos or a visit, means we arrive with the right kit.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
How do you protect the area?
Protection goes down first: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
What’s involved in cleaning extract ducts?
Each section is cleaned through its own panel. Heavy grease comes out by hand, and what’s left is degreased, with readings taken before and after.
Can we book visits on a schedule?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
What happens if there are not enough access panels?
Ductwork needs access to be cleaned. Those parts are listed, and we can install panels so they’re reached next time.
Can you price the work without visiting?
Yes, for many jobs. Send wide shots, close-ups of any access panels and anything that worries you, and a fixed quote normally follows within one working day. If pictures are not enough, we will survey first.
For landlords and multi-site operators
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Each site gets its own report and photos, so each one has its own record.
What affects the cost of ductwork cleaning
We quote each job individually. These are the things that affect it:
- The size of the system
- What state the system is in
- One-off work versus a regular cycle
- Site requirements such as sign-in and permits
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll go through it with you.
What we need to know
Many jobs can be priced from pictures and some basics. Send what you can of the following:
- Where the site is and what kind of site it is
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Problems your staff have spotted
- A few general shots of the system
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. Then we send a fixed price so you know the cost before work begins.
Also near Queen's Bower
What else we do in Queen's Bower
Why act early in Queen's Bower
A fire in a greasy duct is hard to reach and hard to stop. The duct can carry it to rooms, floors or roof spaces well away from the kitchen, so cleaning the duct is as important as cleaning the hood. In a small place like Queen's Bower, a system that fails can take a site out of use.
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
Why book with us
- One contact for all your sites in London and the South East
- A fixed price before any work starts
- Every job surveyed first
- Photo reports with every job
What staff can safely do
Staff cleaning does not replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That’s our job.
How it works
We start by comparing what we find with the survey or your photos. Anything unexpected is raised with you before we go further. From there, it takes a few hours for a short run, longer for long runs and tall risers. If you can send photos, we can arrive in Queen's Bower knowing what to expect.
- First we diagnose: the route, the access and the grease levels.
- You get a fixed price before work starts.
- We clean section by section, working from panel to panel.
- Bends, risers and the base of each riser get extra attention.
- The duct is signed off with readings, pictures and a next clean date.
Preparing for the visit
- Clear loose items from the work area
- Mention any parking or loading restrictions
- Let us know when the site is closed or quiet
Getting a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before any work starts.