Isle of Wight · TR19 inspections and grease testing
TR19 inspections and grease testing in Queen's Bower, Isle of Wight
TR19 inspection for commercial sites in Queen's Bower and across the Isle of Wight. CHAS, SafeContractor and ISO 9001, and fully insured.
- Kitchens whose menu or hours have changed
- Extracts that may be over the 200 micron mean
- Pre-clean surveys before a first TR19 clean
What the work involves, part by part
Extract fan and discharge
Grease on the fan adds to wear. Readings show if it needs attention before the next clean.
Restaurants, pubs and hotels
Inspections are done when the kitchen is closed or quiet so the kitchen keeps cooking.
About our TR19 inspection in Queen's Bower
After a clean, post-clean verification checks the result, with fresh grease readings, pictures and a look at the areas that were cleaned. It gives you evidence of how the system was actually left. The work covers pre-clean surveys, insurer audits and wet film thickness tests, and the jobs we see most are insurance renewals needing proof of TR19 cleaning and checking the result of a recent clean.
In a village or hamlet like Queen's Bower, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease, whatever the size of the place.
The report is your system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Where
- Queen's Bower (PO36)
- Region
- Isle of Wight
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Staff cleaning versus specialist work
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We’ll take a look and send you a fixed quote.
Queen's Bower kitchens: local notes
Queen's Bower lies within about 2 miles of the sea. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. The FSA’s food hygiene register includes about 6 bars, pubs and nightclubs and about 3 hotels, B&Bs and guest houses in and around Queen's Bower, up to about a mile and a half out. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. It’s Isle of Wight council that sends environmental health officers to food businesses in Queen's Bower. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Queen's Bower is Arthur Webster Memorial Hospital for Children, about 1.7 miles south. If you run catering at a historic house or estate in the area (Haseley Manor is about 1.5 miles west), event kitchens in older buildings often have awkward duct runs that need planning. For schools such as Newchurch Primary School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed.
Queen's Bower is about 5 miles south of Ryde, in the Isle of Wight. For TR19 inspection in and around Queen's Bower, please call 0345 646 2711, or send details by email for a fixed quote. We work across South East England and London, including Queen's Bower. Our the Isle of Wight coverage runs to 125 places, and Queen's Bower is one of them. Portsmouth is in our area too, around 12 miles away.
Postcode districts we cover here for TR19 inspection: PO36. Other places close to Queen's Bower include Skinner's Hill (1 mile north-west), Alverstone Garden Village (1 mile north-east), Alverstone (1 mile north-east), Lake (1 mile south-east) and Sandown (1 mile east). Larger places within reach include Newport (5 miles north-west), Ryde (5 miles north), Cowes (8 miles north-west), Ventnor (4 miles south), East Cowes (8 miles north-west) and Oakfield (5 miles north). If your site is somewhere remote, a little more planning is needed, so let us know when you get in touch.
What’s near Queen's Bower
Typical jobs here are in premises near Sandown Bay Academy and The Pointer Inn. The nearest railway station is Sandown station, about 1.4 miles east of the centre. Nearby you’ll also find Sandown Castle (2 miles east) and Wight Aviation Museum (0.6 miles south-east). Open spaces near Queen's Bower include Brading Down and Alverstone Mead.
How the visit works
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. It takes an hour or two for a single kitchen, longer for a large or complex system, and the area is cleaned down before we leave. Rural roads and tight entrances are worth telling us about before a visit to Queen's Bower.
- First we book a time that will not disrupt cooking.
- Every part of the system is examined, end to end.
- Grease thickness is measured at set points by WFTT or DTT.
- We photograph the test points and record any sections we can’t reach.
- The findings go into a report with readings, photos and a recommended next clean.
Getting ready for the visit
- Make sure someone can let us in and lock up afterwards
- Clear loose items from the work area
- Tell us about site rules, permits or sign-in
How to get a quote
Need a price for TR19 inspection? Please give us a ring on 0345 646 2711, or email photos and tell us about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Related advice
Nearby places to Queen's Bower
More services for Queen's Bower
What affects the cost of TR19 inspection
A fixed price needs a few facts first. We look at:
- A single visit or a regular plan
- Access, including roofs, risers and ceiling voids
- The times the site is available
- The size of the system
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re not sure what’s needed, phone us on 0345 646 2711 or use the quote form for straight advice and a fixed quote.
What to send for a quote
What to send for a quote:
- The paperwork from the last visit, if you have it
- Photos showing the whole system and its surroundings
- The postcode and the type of business
- Your opening hours and when the area is out of use
Quotes are quick. Send a few details and photos, and we normally reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Between visits
To keep the system working properly between visits:
- Keep TR19 certificates, readings and reports together
- Clean grease off the canopy between professional cleans
- Keep grease filters clean and fitted properly
- Book the next test on the date in the report
Where sections couldn’t be reached, the report says where access panels would help. Fitting them before the next clean means the whole system gets done.
Fit access panels where the survey finds sections cannot be reached, so grease isn’t left building in hidden parts.
Why deal with it now?
Without readings, you’re guessing when to clean. If grease reaches 500 microns anywhere, TR19® Grease calls for immediate spot cleaning, and you can only act on that if you’ve measured it. A fault that closes a site in a village like Queen's Bower affects everyone who depends on it.
Several systems or sites on one quote often makes better use of the time. Tell us about everything you’d like looked at and we’ll price it together.
Why choose Duct Doctor in Queen's Bower
- We are fully insured
- Accredited under CHAS and SafeContractor, with ISO 9001
- Fixed quotes from a survey or photos
- Out-of-hours work and a 24/7 emergency line
See our cost guide or our accreditations.
For landlords and multi-site operators
We also work for facilities teams across offices, schools and healthcare in Queen's Bower and across the Isle of Wight. Work can be phased by floor, building or site to keep disruption down.
We regularly work with managing agents. Send the address, what’s needed and how access works and we will come back with a fixed quote.
FAQs for Queen's Bower
Which fire service covers Queen's Bower?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Queen's Bower. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Does being near the coast affect TR19 inspection in Queen's Bower?
It can, as Queen's Bower is within about 2 miles of the sea, where salt in the air is hard on metal. We look at fans, cowls and fixings for rust as well as grease.
Can you look after several sites?
Yes. We work across South East England and London, so we can schedule a run of sites as one programme. Each site gets its own report and photos.
What do you do with what you remove?
We contain it and take it with us. We collect grease, debris and waste water as we go rather than letting it spread.
Is TR19 a legal requirement?
No, TR19® is not legislation. The Fire Safety Order 2005 still requires the responsible person to manage fire risk, which in a kitchen includes grease in the extract. Many insurance policies also require TR19 adherence.
Which accreditations do you hold?
We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
How do you keep the site clean during the work?
By covering it before any work starts. The work is kept contained and leave the area clean.
What is a WFTT or DTT grease test?
Grease thickness testing measures the layer of grease on the duct surfaces, using the Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). Each reading is recorded in microns.