Kent · TR19 inspections and grease testing
Westbrook TR19 inspection
Our technicians work in Westbrook on TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification. Out-of-hours visits, a fixed quote and a written report with pictures as standard.
- Missing access panels found on survey
- Confirming a clean reached the whole system
- Systems cleaned on a calendar with no measurements
How we handle TR19 inspection in Westbrook
Insurance policies often require evidence of TR19® cleaning and inspection. Missing records can lead to a claim being reduced or refused. A TR19 audit sets out the system’s condition, with readings and pictures, for sites in Westbrook and the rest of Kent. Typical jobs include kitchen extract systems with no recent grease readings and kitchens taken over with no cleaning records, on access surveys, pre-clean surveys and deposit thickness tests.
Around a smaller place like Westbrook, kitchen extracts tend to belong to pubs, cafés, takeaways and school or care home kitchens. Quieter kitchens still collect grease in the duct, just more slowly, so the interval is set by hours of use and grease readings.
Each visit ends with a written report and pictures, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Westbrook (CT9)
- Region
- Kent
- Records
- Certificate plus before-and-after photos
- Quotes
- Fixed quote, normally within a working day
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
TR19 inspection around Westbrook
Westbrook is within about 1 mile of the coast. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. The FSA’s data shows about 44 pubs and bars and about 8 hotels, B&Bs and guest houses registered within about 1.5 miles of central Westbrook. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. In Westbrook, food businesses are inspected by environmental health officers from Thanet council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready.
Term dates shape school work: for a school like Garlinge Primary School and Nursery, an extract clean fits neatly into a half-term or summer break. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Queen Elizabeth the Queen Mother Hospital is the nearest hospital to Westbrook, about 1.3 miles south-east. Commuter trade near Margate station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands.
Westbrook is about 1 mile west of Margate, in Kent. Every kind of commercial site in Westbrook, we can take on TR19 inspection. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. 922 places in Kent are on our list, large and small. You can also see our page for Maidstone, roughly 37 miles from Westbrook.
We work across CT9 for TR19 inspection and the streets around it. Local streets include Bridge Road, Caxton Road and Albert Road, and we cover them all for TR19 inspection. Close by, we work in Garlinge (1 mile south-west), Margate (1 mile east), Westgate-on-Sea (1 mile west), Flete (2 miles south) and Westwood (2 miles south-east). Larger places within reach include Canterbury (14 miles south-west), Ramsgate (4 miles south-east), Broadstairs (3 miles south-east), Whitstable (14 miles west), Deal (12 miles south) and Herne Bay (10 miles west).
Near you in Westbrook
Typical jobs here are in premises near Cinque Ports Public House and Hartsdown Academy. Westbrook has its own railway station: Margate station. Other landmarks nearby include Westwood Cross (2.3 miles south-east) and Queen Elizabeth the Queen Mother Hospital (1.3 miles south-east). The countryside around Westbrook includes Sandwich and Pegwell Bay.
Also in Westbrook
For landlords and multi-site operators
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we’ll send a fixed quote.
How the visit works
The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and pictures. The middle part takes longest, which takes an hour or two for a single kitchen, longer for a large or complex system. Around Westbrook, access is usually simpler than in a town centre, though gates and roof access are worth mentioning.
- We go through any past certificates and reports.
- We follow the extract from canopy to discharge.
- We note where access panels are and where more are needed.
- Grease readings are taken and photos recorded.
- We report back with readings and a fixed quote.
How to prepare
- Find the previous report, if there is one
- Agree a time when the area can be out of use
- Name a contact who can let us in at the agreed time
Getting a quote
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before work begins.
Read more
What the work involves, part by part
Horizontal duct runs
Grease settles on the floor of horizontal ducts as the air cools. We test at points along the run through access panels.
Restaurants, pubs and hotels
We test between services, early in the morning or after close so the kitchen keeps cooking.
Honest limits
Some problems need a different service or another trade:
- Hidden runs that need access panels first
- Ductwork that was designed or installed badly
- The responsible person’s own fire risk assessment
If you are not sure, just ring 0345 646 2711, or send details by email and we will give you a straight answer.
Parts of the system we cover
- Wet film thickness tests
- Deposit thickness tests
- Post-clean checks
- Insurer audits
- Access surveys
- Pre-clean surveys
Westbrook: your questions answered
Do you do school kitchen extract cleaning in Westbrook in the summer holidays?
Yes, and it’s the easiest time to do it. Around Westbrook, the Food Standards Agency lists about 14 schools and colleges with registered kitchens within a mile and a half or so. Tell us your holiday dates and we will book the visit for when the site is empty.
Which fire and rescue service is responsible for Westbrook?
Kent Fire and Rescue Service is the fire and rescue service for Westbrook. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
What do the grease readings need to be?
TR19® Grease says the mean shouldn’t exceed 200 microns between cleans, with 500 microns or more anywhere needing immediate spot cleaning.
How far ahead should we book?
For planned work, earlier is better, particularly if your next visit is nearly due. Emergencies are different, because our line is open 24/7.
What does TR19 mean?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
How often should a kitchen extract be inspected?
Enough to be sure grease stays within the TR19® Grease figures between cleans. The readings themselves tell you if the interval needs to change.
What does a pre-clean survey involve?
A survey finds out how the system is laid out, how dirty it is and what can be reached, before anyone starts cleaning. Any access problems are flagged so they can be sorted first.
What affects the quote in Westbrook
Sites vary more than people expect. The main factors:
- Travel, parking and unloading
- Site requirements such as sign-in and permits
- When the work can happen, such as evenings, overnight or weekends
- The condition of the system
The cost depends on how big the system is, what state it’s in and access to every part of it. We give you a fixed price before we start, so there are no surprises.
What to send for a quote
When you contact us, these details help:
- How we’d reach plant on a roof or in a plant room
- Any access panels or hatches you can see
- Problems your staff have spotted
- The paperwork from the last visit, if you have it
To get a fixed quote, phone us on 0345 646 2711 or use the quote form and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. We usually come back within one working day.
Between visits
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Have the latest report ready for insurance renewals
- Keep grease filters clean and fitted properly
- Clean grease off the canopy between professional cleans
- Diary the next grease test and clean
Readings of 500 microns or more are highlighted as needing immediate spot cleaning, and we can quote to do it.
Revisit the cleaning interval whenever the menu or hours change. Fresh readings show whether it needs to change.
What staff can safely do
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.