Kent · TR19 inspections and grease testing
TR19 inspections in Sibertswold
For TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification in Sibertswold, one call is all it takes: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Post-clean verification after another contractor’s clean
- Missing access panels found on survey
- Cleaning intervals that may not suit the kitchen
TR19 inspection in Sibertswold
A pre-clean survey is the diagnosis, and the clean is the treatment. We look at the system, take grease readings and photograph what we find, so the clean can be planned properly. If you are dealing with extracts that may be over the 200 micron mean and sections of duct that can’t be reached, we can help, from deposit thickness tests, pre-clean surveys and wet film thickness tests onwards.
For a kitchen in or near Sibertswold, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
The sign-off is always in writing: a dated report with pictures of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.
- Location
- Sibertswold (CT15)
- Wider area
- Kent
- Records
- Certificate plus before-and-after pictures
- Price
- A fixed quote up front
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
When to call us in Sibertswold
Menus, opening hours and cooking styles change over time, and more frying or longer hours mean more grease. A cleaning interval set years ago may no longer fit.
Any of these means the system needs a check-up:
- Cleaning intervals that may not suit the kitchen
- Kitchen extract systems with no recent grease readings
- Confirming a clean reached the whole system
- Heavy grease suspected in the plenum or ducts
If you run a café or takeaway near Shepherds Well station, early starts and late finishes leave little time to clean, so overnight extract cleaning suits.
What your quote should include
- What paperwork you get at the end
- How areas they cannot reach will be recorded
- Whether they’re fully insured
- When they can work, and whether that is outside your opening hours
Nearby places to Sibertswold
More services for Sibertswold
How it works
There’s very little for your team to do on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Afterwards, the area is left tidy and the written report follows. Visits to a village like Sibertswold are booked in advance, at a time that suits whoever runs the site.
- We go through any past certificates and reports.
- We follow the extract from canopy to discharge.
- Access panels are located and any missing ones noted.
- We measure the grease and photograph each point.
- You get a report and a fixed quote for the clean.
Preparing for the visit
- Arrange a key holder or contact on site
- Agree a time when the area can be out of use
- Plan for cooking equipment or plant to be off before we arrive
Get a fixed quote
Need a price for TR19 inspection? Please call us on 0345 646 2711 or email us with a few details about the site. We’ll talk you through the work and send you a fixed quote before you commit to anything.
Related advice
FAQs for Sibertswold
Can you get to a site in Sibertswold?
Yes. Sibertswold is within the area we cover across London and the South East. A survey first, from pictures or a visit, means we arrive with the right kit.
Do you work at weekends in Sibertswold?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Just call us on 0345 646 2711, or email photos with your opening times and we’ll plan around them.
Can you verify a clean after it’s been done?
We visit after a clean, take readings at set points and photograph the system. Any areas that weren’t cleaned properly are flagged.
Is TR19 cleaning the law?
No. TR19® is a specification, not a statute. Without TR19 records, an insurance claim can be reduced or refused, so it matters in practice.
How much time does an inspection need?
It takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. The visit is timed so cooking isn’t disrupted.
When should we have our next grease test?
It depends on how heavily the kitchen cooks. BESA sets minimum cleaning intervals of 3, 6 or 12 months by daily use, and grease readings help set the real interval.
Do you work with multi-site operators?
Yes. Tell us the addresses and what each needs and you’ll get one fixed quote.
How much notice should we give?
For planned work, earlier is better, particularly if your next visit is nearly due. Emergencies are different, because our line is open 24/7.
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Part by part
Canopy and plenum
Clean-looking filters don’t mean a clean plenum. That is why we test behind them.
Horizontal duct runs
Flat duct runs collect grease along their base. We test at points along the run through access panels.
What TR19 inspection looks like in Sibertswold
The FSA’s data shows about 3 pubs and bars registered within roughly a mile and a half of the centre of Sibertswold. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. Kent Fire and Rescue Service covers Sibertswold. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. Kitchens in Sibertswold get their food hygiene inspections from Dover council. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready.
Goodnestone Park, about 3.9 miles north, is one of the historic houses near Sibertswold; if you run event catering at a venue like that, cleans can be booked between functions. If you run catering at a healthcare site, such as a hospital like Buckland Hospital about 4.6 miles south-east, the extract may need cleaning more often than a part-time kitchen.
Sibertswold (also: Shepherdswell) is about 4 miles north-west of Dover, in Kent. Anywhere in CT15, we can take on TR19 inspection. Sibertswold is one of 922 places in Kent where we work for TR19 inspection. We also work in Maidstone, around 31 miles away.
Our technicians cover all of the CT15 postcode area for TR19 inspection and the streets around it. You’ll find streets such as Station Road, Hill Avenue and Eythorne Road, and we cover them all for TR19 inspection. Other places close to Sibertswold include Halfway Street (1 mile south-west), Coldred (1 mile south-east), Waldershare (1 mile east), Eythorne (2 miles north-east) and Lydden (2 miles south). Further out, we also cover Canterbury (9 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (8 miles south), Ramsgate (13 miles north-east) and Broadstairs (15 miles north-east).
Landmarks near Sibertswold
Around Sibertswold, our work takes us to kitchens and buildings near The Bricklayers' Arms and the streets around them. There’s a railway station in Sibertswold itself: Shepherds Well station. Well-known places in the area include Dover Transport Museum (3.6 miles south-east) and Buckland Hospital (4.6 miles south-east).
What TR19 inspection can’t fix
A few issues sit outside what this work can do:
- Fan breakdowns, which need a repair visit
- Removing the grease, which is a separate clean
- Design faults in the extract system
Not sure which it is? You can ring 0345 646 2711 or use the quote form and we will tell you honestly before you book.
Parts of the system we cover
- Pre-clean surveys
- Access surveys
- Post-clean checks
- Wet film thickness tests
- Insurer audits
- Deposit thickness tests
Keeping the system healthy
So the system stays in good health:
- Never cook with filters missing
- Book the next test on the date in the report
- Keep access panels clear and unpainted
- Share inspection reports with your insurer or broker when asked
You get a report with the grease readings, where they were taken and pictures of each point. File it alongside your TR19 certificates.
Close the access gaps found during inspection, so grease isn’t left building in hidden parts.
What affects the cost of TR19 inspection
The price is fixed before any work begins. It’s based on:
- The number of sites or systems
- Access, including roofs, risers and ceiling voids
- Whether it’s a one-off visit or part of a schedule
- The size of the system
Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered and we will price it together.
What we need to know
Many jobs can be priced from photos and some basics. Useful things to send:
- The site address and the type of premises
- Close-ups of filters, grilles, hatches or access panels
- Your last certificate, test record or report
- Your opening hours and when the area is out of use
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before we start.