Kent · Fire damper testing
Fire Damper Testing in Sibertswold
Our technicians work in Sibertswold on fire damper drop testing and smoke damper testing, with a record for each damper. Out-of-hours visits, a fixed quote and a written report with pictures as standard.
- Buildings with no damper register
- Dampers hidden with no access panel or hatch
- Fire dampers that haven’t been tested for over a year
Between visits
Think of this as the after-treatment advice, short and simple:
- Add new dampers to the register as they’re fitted
- Keep damper test reports with the fire safety log
- Act on failed dampers rather than leaving them on file
- Fix water leaks in plant rooms and risers promptly
Share the results with your fire risk assessor so their assessment matches what was found. Outstanding faults should be dealt with, not left on file.
Make sure every damper can be reached. If a damper has no access panel, have one fitted before the next test.
How we handle fire damper testing in Sibertswold
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. Spring-operated dampers need testing every year as a minimum. We carry out fire damper testing for buildings in Sibertswold and give you the records to show it’s been done. The work covers wall and floor dampers, fusible link fire dampers and riser dampers, and the jobs we see most are corroded dampers in damp risers and plant rooms and dampers flagged on a fire risk assessment.
For a building in or near Sibertswold, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Duct Doctor has been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Place
- Sibertswold (CT15)
- Region
- Kent
- Reporting
- Photo report after every visit
- Quote
- Fixed quote, usually within a working day
- When we work
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Checked
- 30 October 2026
Also near Sibertswold
Also in Sibertswold
How the job changes from site to site
Smoke dampers
Because they’re linked to controls, smoke damper tests can need some coordination. We plan that with you before the visit.
Ceiling voids and risers
Damp plant areas are hard on dampers. Signs of corrosion or water are recorded so the cause can be tackled.
How we price fire damper testing
The quote reflects the site in front of us. We take into account:
- Whether it’s a one-off visit or part of a schedule
- The number of sites or systems
- The condition of the system
- Parking and loading at the site
We do not list prices on the website, because the cost depends on the site in front of us. Call for a fixed quote, and we’ll talk you through it.
What to send for a quote
Many jobs can be priced from pictures and some basics. Send what you can of the following:
- A few general shots of the system
- The paperwork from the last visit, if you have it
- The roof, plant room or outside wall the system runs to
- The postcode and the type of business
If you need fire damper testing in Sibertswold, phone us on 0345 646 2711, or email photos. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. We usually send a fixed quote within one working day.
When something else is needed
In fairness, some problems need a different fix:
- Signing off a building’s overall fire safety
- Fire-stopping gaps around the duct where it passes through the wall
- Dampers that were never installed where they’re needed
If you are not sure, just call us on 0345 646 2711, or email photos and we will give you a straight answer before you book.
Parts of the system we cover
- Wall and floor dampers
- Hospitals and care homes
- Offices and schools
- Fusible link fire dampers
- Riser dampers
- Motorised smoke dampers
Why act early in Sibertswold
When something goes wrong, people ask what checks were in place. A damper test log helps show the responsible person kept on top of things, and they only exist if the testing happened. It’s simpler to plan the work at Sibertswold now than to arrange it in a hurry later.
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. You’ll have a fixed price before we start.
What you get with us
- A fixed price before any work starts
- A written report with photos after each visit
- Work around your opening hours, with 24/7 emergency cover
- Full insurance on every job
Take a look at how cleaning jobs are priced or our accreditations and certificates.
How it works
We are used to working while the site is closed. A lot of visits happen overnight or at weekends, so a kitchen or building can carry on as usual the next day. On site, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Somewhere as small as Sibertswold, the date and timings are agreed with you well before the day.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
Preparing for the visit
- Make sure someone can let us in and lock up afterwards
- Let us know about permits to work or site inductions
- Tell us the best time to work, such as after service or at a weekend
Getting a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.
Related advice
Common problems we fix in Sibertswold
Fusible links and springs do not last for ever. A link can be damaged, painted over or swapped for the wrong one, and a tired spring may not drive the blade home, and that only becomes clear during a drop test.
If you notice any of these, it’s worth a diagnosis:
- Rusted damper blades and springs
- Smoke dampers that need testing through their controls
- Fire damper items raised by an assessor
- Dampers that stick or will not close fully
For buildings around Shepherds Well station with ducted ventilation, any fire dampers need an annual test at least.
Before you book anyone
- Proof of insurance
- How they set the interval to the next visit
- Whether the quote is based on a survey or pictures
- Whether the price is fixed
Fire dampers in Sibertswold buildings
The FSA’s food hygiene register lists about 4 caring premises (care homes, nurseries and hospitals) with registered kitchens or food service within 1.5 miles or so of the middle of Sibertswold. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. Sibertswold’s nearest hospital, Buckland Hospital, is about 4.6 miles south-east. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Sibertswold is covered by Kent Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
Goodnestone Park, about 3.9 miles north, is one of the historic houses near Sibertswold, and older buildings converted to new uses often have ventilation added later. If you manage a care home or clinic near Sibertswold, the testing that a hospital like Buckland Hospital (about 4.6 miles south-east) relies on applies to your dampers too.
Sibertswold (also: Shepherdswell) is about 4 miles north-west of Dover, in Kent. Wherever you are in the CT15 postcode area, we cover fire damper testing for commercial sites. Our Kent coverage runs to 922 places, Sibertswold among them. For sites nearby, see our Maidstone page, about 31 miles away.
Here we cover the CT15 postcode area for fire damper testing. If you need fire damper testing at premises on Station Road, Hill Avenue and Eythorne Road or anywhere close by, our technicians can take on the work. Neighbouring places we cover for fire damper testing include Halfway Street (1 mile south-west), Coldred (1 mile south-east), Waldershare (1 mile east), Eythorne (2 miles north-east) and Lydden (2 miles south). Further out, we also cover Canterbury (9 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (8 miles south), Ramsgate (13 miles north-east) and Broadstairs (15 miles north-east).
What’s near Sibertswold
Typical jobs here are in premises near The Bricklayers' Arms, among other places. Sibertswold has its own railway station: Shepherds Well station. Other landmarks nearby include Dover Transport Museum (3.6 miles south-east) and Buckland Hospital (4.6 miles south-east).
FAQs for Sibertswold
Who enforces fire safety at workplaces in Sibertswold?
It’s Kent Fire and Rescue Service, which covers Sibertswold. If a fire safety officer audits the building, they may ask for the latest damper test records.
Can you get to a site in Sibertswold?
Yes, smaller places are covered as well as towns. A survey first, from pictures or a visit, means we arrive with the right kit.
Is TR19 cleaning required by law?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Fire Safety Order 2005, the responsible person must reduce fire risk, and without records, many insurers may refuse or reduce a claim.
Do you test smoke dampers as well?
Yes. We test smoke dampers through their control system, as they’re motor driven. We check every blade moves fully and record the outcome.
Is there a survey before the work?
Yes, always. Diagnosis comes before treatment: the survey tells us what the system needs and how to reach it and the fixed quote is built on it.
Do we lose a day’s trading?
Typically not. Booking the work out of hours means the site can carry on as normal. Larger jobs can be phased over several visits so parts stay in use.
Do you have insurance?
Yes. Full insurance covers our work, and we’ve been trading since 2009.
How often does BESA say fire dampers should be tested?
At least once a year, under BESA guidance, plus a test when the damper is first installed. Your fire risk assessment may call for some dampers to be tested more often.