Greater London · TR19 inspections and grease testing
TR19 inspections and grease testing in Kingsland, Greater London
One call covers TR19 inspections and grease testing in Kingsland, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Missing access panels found on survey
- Surveys needed before quoting a full clean
- Post-clean verification after another contractor’s clean
Do you need TR19 inspection in Kingsland?
Menus, opening hours and cooking styles change over time, and more frying or longer hours mean more grease. The old cleaning schedule may not match the kitchen any more.
The symptoms we’re asked about most include:
- Cleaning intervals that may not suit the kitchen
- Systems that need surveying before cleaning
- Systems cleaned on a calendar with no measurements
- Missing access panels found on survey
A kitchen near Dalston Junction station that serves breakfast and dinner can run its extract twelve hours or more, which shortens the cleaning interval.
Questions to ask before you book
- What paperwork you get at the end
- Whether the whole system is included, or only the parts that are easy to reach
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- If the quote is a fixed price or an estimate
About our TR19 inspection in Kingsland
TR19® Grease says grease should not exceed a mean of 200 microns between cleans, while a reading of 500 microns or more anywhere calls for immediate spot cleaning. Grease testing shows which side of those lines you’re on. The work covers post-clean checks, deposit thickness tests and pre-clean surveys, and common reasons people get in touch are checking the result of a recent clean and cleaning intervals that may not suit the kitchen.
London kitchens tend to trade late and open early, so work in Kingsland is normally booked for the night or the early hours. Parking, loading and access to the roof are agreed with the building before the night of the clean.
Nothing is signed off by word of mouth: a written report, dated and illustrated with photos, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Location
- Kingsland (N1, E8, N16)
- Wider area
- Greater London
- Records
- Certificate plus before-and-after photos
- Quotes
- A fixed quote up front
- Hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
When something else is needed
We will not sell you work that doesn’t address the problem, so here are the limits:
- Heavy deposits found on test, which still need cleaning
- Installation problems, which fall under design guidance such as DW172
- The legal duty, which stays with the responsible person
If in doubt, give us a ring on 0345 646 2711 or drop us a line and we’ll say what we think.
What the work covers
- Wet film thickness tests
- Post-clean checks
- Pre-clean surveys
- Deposit thickness tests
- Access surveys
- Insurer audits
Grease, kitchens and Kingsland
The FSA’s data shows about 167 pubs, bars and clubs and about 17 hotels and guest houses registered in Kingsland and the streets around it, up to about 1.5 miles out. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. The fire and rescue service for Kingsland is London Fire Brigade. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. Food hygiene inspections in Kingsland are the job of Hackney council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready.
Term dates shape school work: for a school like Holy Trinity Church of England Primary School, an extract clean fits neatly into a half-term or summer break. If your kitchen is in a listed or historic building, like the houses around Kingsland (Sutton House is about 1.1 miles east), fitting access panels needs care.
Kingsland is about 1 mile north-east of Hoxton, in Greater London. Whether your site is in the middle of Kingsland or further out, TR19 inspection is available to all kinds of commercial premises, from small sites to large estates. Kingsland is one of 764 towns, villages and districts in Greater London we cover for TR19 inspection.
TR19 inspection in N1, E8 and N16 follows the same survey, fixed quote and written report as everywhere else we cover. Streets in the area include Dove Road, Glebe Road and Ufton Road, all of which we cover for TR19 inspection. We also cover the places around Kingsland: De Beauvoir Town (1 mile south-west), Dalston (1 mile east), Mildmay (1 mile north-west), Canonbury (1 mile west) and Newington Green (1 mile north-west). Further out, we also cover London (3 miles south), City of Westminster (4 miles south-west), Marylebone (4 miles south-west), Kensington (6 miles south-west), Walthamstow (4 miles north-east) and Hampstead (5 miles west).
Around Kingsland
We work in commercial kitchens and buildings around Bishopsgate Institute Special Collections and Archives, Hackney New School and Kingsland Secondary School, among other places. Nearby too are Shoreditch Park (0.9 miles south-west) and The Prince of Wales pub (within half a mile south). There’s a railway station in Kingsland itself: Dalston Junction station. A little further out are Montfichet's Tower (2.4 miles south-west) and Clowns Gallery-Museum (within half a mile east). Not far away are St. James's Park Lake and Gillespie Park.
Your questions about TR19 inspection in Kingsland
Do you do school kitchen extract cleaning in Kingsland in the summer holidays?
Yes. Half-terms and the summer break are the natural time for school work. Around Kingsland, the Food Standards Agency lists about 43 schools and colleges with registered kitchens within a mile and a half or so. Just call us on 0345 646 2711 or use the quote form with your term dates and we’ll plan around them.
Can you come to Kingsland after we close?
Yes, we can come after you close and finish before you open. The work in Kingsland can fit around your hours. Just call us on 0345 646 2711 or email us with your opening times and we will plan around them.
What information do you need?
Where the site is, what it is and when it’s open, plus pictures of the system and your last certificate or report if you have one.
How often should a kitchen extract be inspected?
Each report recommends when to test and clean next, based on the readings and how the kitchen is used. A risk assessment based on measured grease should set the interval.
What about areas you can’t get to?
The report shows them clearly. Often the fix is extra access, such as new panels in ductwork, which we can install.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
What is grease thickness testing?
Grease thickness testing measures the layer of grease on the duct surfaces, using the Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). Each reading is recorded in microns.
How long does grease testing take?
As a guide, it takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. System size and access decide the rest.
How it works
We start by comparing what we find with the survey or your photos. Anything unexpected is raised with you before we go further. From there, it takes an hour or two for a single kitchen, longer for a large or complex system. Before any visit in Kingsland, we agree where the van can stop and how equipment reaches the system.
- The visit is arranged for when the kitchen isn’t busy.
- We look over the canopy, plenum, ducts, fan and discharge.
- Grease thickness is measured at set points by WFTT or DTT.
- We photograph the test points and record any sections we cannot reach.
- The findings go into a report with readings, photos and a recommended next clean.
Before we arrive
- Clear loose items from the work area
- Allow time for equipment near the work to be turned off and cool down
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Ask for a quote
Quoting starts with a diagnosis, from your pictures and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work so you know the cost before work begins.
Related advice
Towns and villages near Kingsland
Also in Kingsland
Different parts, different methods
Canopy and plenum
Behind the filters, the plenum catches plenty of grease. Readings and photos are taken in the plenum as part of every survey.
Horizontal duct runs
If a run has no access panel, we note it so panels can be added.
What staff can safely do
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
Between visits
Good habits slow the build-up between visits. A few tips:
- Flag oily drips near the extract
- Have the latest report ready for insurance renewals
- Wipe the canopy surfaces regularly
- Keep the route to access panels clear
You get a report with the grease readings, where they were taken and photos of each point. File it alongside your TR19 certificates.
Test grease regularly instead of relying on the calendar. It shows if build-up is speeding up.
Managing agents and facilities teams in Kingsland
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.