Kent · TR19 inspections and grease testing
Heronden TR19 inspection
Professional TR19 inspection in and around Heronden, booked around your opening hours and signed off in writing with pictures.
- Kitchens whose menu or hours have changed
- Systems cleaned on a calendar with no measurements
- Surveys needed before quoting a full clean
How we handle TR19 inspection in Heronden
A fixed schedule doesn’t always match how a kitchen really cooks. In a busy kitchen, grease can build faster than the minimum intervals allow for, which is why measurement matters. We give your risk assessment measured figures rather than guesses. The work covers pre-clean surveys, deposit thickness tests and wet film thickness tests, and the jobs we see most are pre-clean surveys before a first TR19 clean and systems cleaned on a calendar with no measurements.
Somewhere as small as Heronden, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease.
Accreditations are easy to claim and worth checking. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Where
- Heronden (CT13)
- Region
- Kent
- Paperwork
- Certificate and photo report
- Quotes
- Fixed quote, typically within a working day
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Heronden: your questions answered
Can you work in Heronden outside opening hours?
Yes, we can come after you close and finish before you open. Your customers, staff or residents in Heronden needn’t be disturbed. Let us know the hours you are closed and we’ll book within them.
Do you work in villages like Heronden?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
Where does the waste go?
It leaves the site with us at the end of the visit. While we work, it’s kept contained so the area stays clean.
Can you quote from pictures?
Yes, where the photos show enough. If not, a site survey comes first, then a fixed quote.
What does TR19 inspection cost?
It depends on the site, so we quote each one individually. To get one, call 0345 646 2711 or use the quote form with the site type, opening hours and a few photos.
Can we book visits on a schedule?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. Each report recommends when the next visit should be.
Do you carry out TR19 audits for insurers?
Yes. Our TR19 audits cover readings, photos, access and a recommended cleaning interval. It’s set out for your insurer or broker.
What is post-clean verification?
A post-clean check records grease readings and photos after the work, whoever did the clean.
What we are called out for in Heronden
Not every section of a kitchen extract is easy to get to, so those sections can be skipped time and again. An inspection of a system in Heronden shows where access panels are missing, so the gaps can be closed.
Most sites get in touch after spotting one of these:
- Sites with gaps in their extract records
- Sections of duct that can’t be reached
- Pre-clean surveys before a first TR19 clean
- Insurance renewals needing proof of TR19 cleaning
Bursars and site managers at schools such as Eastry Church of England Primary School tend to book extract cleaning for when the kitchen is empty.
Comparing quotes
- Whether VAT is included
- Proof of insurance
- How they set the interval to the next visit
- Whether the figure could change on the day
Places near Heronden
What else we do in Heronden
Kitchen extracts in Heronden
Food Standards Agency records list about 3 restaurants, cafés and works canteens in Heronden and the streets around it, up to about 1.5 miles out. Kitchens like these cook for very different hours, and grease testing shows which extracts need cleaning soonest. It’s Dover council that sends environmental health officers to food businesses in Heronden. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Heronden is covered by Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
Where a hall near Church of St Mary the Virgin, or anywhere in Heronden, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Goodnestone Park, about 2.7 miles west, is one of the historic houses near Heronden; if you run event catering at a venue like that, cleans can be booked between functions.
Heronden is about 5 miles west of Deal, in Kent. From the centre of Heronden to the outskirts, TR19 inspection is available to all kinds of commercial premises, from a single unit to a large public building. Our Kent coverage runs to 922 places, Heronden among them. We also work in Maidstone, around 33 miles away.
All of CT13 is covered for TR19 inspection, from the main roads to the quietest streets. If your site is just outside Heronden, we cover Hammill Park (1 mile north), Chillenden (2 miles west), Flemings (2 miles north), Barnsole (2 miles north-west) and Tilmanstone (2 miles south). Larger places within reach include Canterbury (9 miles west), Margate (11 miles north-east), Dover (7 miles south), Folkestone (12 miles south-west), Ramsgate (9 miles north-east) and Broadstairs (10 miles north-east).
What’s near Heronden
Around Heronden, our work takes us to kitchens and buildings near The Five Bells pub and the streets around them. Heronden’s nearest station is Sandwich station, roughly 3.1 miles north-east. Well-known places in the area include White Mill (3.2 miles north-east) and Sandown Castle (4.9 miles east). The countryside around Heronden includes Monk's Wall nature reserve.
Fixed quotes for TR19 inspection in Heronden
Some jobs are bigger than they look, and some smaller. The main factors:
- The scale of the work
- Whether it’s a one-off visit or part of a schedule
- How many systems or sites are involved
- Site requirements such as sign-in and permits
You will not find a price list here, because the cost depends on the site in front of us. Call for a fixed quote, and we will talk you through it.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Any symptoms, from odd noises to smells or leaks
- Wide photos of the system and the area around it
- Close-ups of filters, grilles, hatches or access panels
- The site address and the type of premises
For a fixed quote, phone us on 0345 646 2711 or email us and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
Multi-site and managed buildings
Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
How it works
The visit has three parts: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with pictures. Most of the time goes on the work itself, which takes a morning or less for one kitchen, more where there are several systems. A few pictures of the system help us make the most of a visit to a place like Heronden.
- First we book a time that won’t disrupt cooking.
- The system is checked from canopy to discharge.
- Grease readings are taken at set points using WFTT or DTT.
- We photograph the test points and record any sections we cannot reach.
- We send a report setting out the readings, pictures and next steps.
Getting ready for the visit
- Dig out any earlier paperwork for the system
- Plan for cooking equipment or plant to be off before we arrive
- Clear the space around the work
Get a fixed quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Related advice
Between visits
To keep the system working properly between visits:
- Keep access panels clear and unpainted
- Send TR19 audit reports to your insurer on request
- Flag changes in how much frying the kitchen does
- Keep TR19 certificates, readings and reports together
Any access problems we found are listed with a suggested fix. With panels fitted, the next clean can cover every section.
When cooking hours or the menu change, check the interval still fits. A quick grease test answers the question.
Different parts, different methods
Canopy and plenum
Filters can look fine while the plenum behind them is heavily coated. So we measure behind the filters, not just in front.
Horizontal duct runs
If a run has no access panel, we note it so panels can be added.
When something else is needed
Some problems need a different service or another trade:
- A faulty or failing extract fan
- Design faults in the extract system
- The grease itself, which needs a full or spot clean
Not sure which it is? You can give us a ring on 0345 646 2711 or use the quote form and we’ll tell you honestly before you book.
What the work covers
- Access surveys
- Pre-clean surveys
- Insurer audits
- Post-clean checks
- Deposit thickness tests
- Wet film thickness tests