Isle of Wight · TR19 inspections and grease testing
Hamstead TR19 inspection
TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification for commercial sites in Hamstead and across the Isle of Wight. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Systems cleaned on a calendar with no measurements
- Pre-clean surveys before a first TR19 clean
- Post-clean verification after another contractor’s clean
About our TR19 inspection in Hamstead
After a clean, post-clean verification checks the result, with new readings and pictures of the cleaned areas. It gives you evidence of how the system was actually left. The work covers wet film thickness tests, post-clean checks and insurer audits, and the jobs we see most are uncertainty over how often to clean and sections of duct that can’t be reached.
In a village or hamlet like Hamstead, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
- Place
- Hamstead (PO41)
- Region
- Isle of Wight
- Paperwork
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
TR19 inspection in Hamstead: the local picture
Hamstead is within about 1 mile of the coast. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. Fire safety in Hamstead falls to Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. It’s Isle of Wight council that sends environmental health officers to food businesses in Hamstead. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Our report lists what was cleaned and when, which is useful to have ready.
Healthcare kitchens, like those at hospitals such as St Mary's Hospital (about 5.9 miles east), often cook for long hours, which puts them in BESA’s heavier-use bands.
Hamstead is about 6 miles south-east of Lymington, in the Isle of Wight. Every kind of commercial site in Hamstead, TR19 inspection is something we can help with. We can work out of hours so the site keeps running. Across the Isle of Wight, we cover 125 places, and Hamstead is one of them. Our Southampton page covers sites nearby, about 14 miles away.
Here we cover the PO41 postcode area for TR19 inspection. Neighbouring places we cover for TR19 inspection include Cranmore (1 mile south-west), Shalfleet (1 mile south-east), Bouldnor (2 miles south-west), Yarmouth (3 miles west) and Thorns Beach (3 miles north). Larger places within reach include Newport (6 miles east), Ryde (12 miles east), Cowes (6 miles north-east), Sandown (13 miles east), Shanklin (13 miles south-east) and Ventnor (13 miles south-east). For island and remote sites, the visit takes a little more planning, so mention it when you ask for a quote.
Local landmarks in Hamstead
The nearest railway station is Lymington Pier station, about 4.9 miles north-west. Well-known places in the area include Yarmouth Castle (2.9 miles west) and St Mary's Hospital (5.9 miles east). For a walk, there’s Compton Down and Boldre Foreshore.
Different parts, different methods
Extract fan and discharge
We look at where the extract discharges outside, as grease can build up there too.
Schools, hospitals and care homes
Inspections are planned around mealtimes and holidays so meals aren’t affected.
What happens on the day
Every visit runs to the same pattern: protect the area, make the system safe, do the work, tidy up and leave you the report. The visit itself takes a couple of hours for a typical kitchen extract system. Photos of the system and how to reach it help us plan a visit to Hamstead.
- After the clean, we arrange a time to check the system.
- The same access points are opened up.
- Grease readings are taken again at set points.
- Photos are taken to show the condition after the clean.
- The results are reported, with anything missed flagged.
Getting ready for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Tell us where we can park and unload
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Getting a quote
There’s no standard price list, because no two systems are the same. We look at your system first, from pictures or on a visit, then send a fixed quote. To start, phone us on 0345 646 2711 or email us.
Advice
Fixed quotes for TR19 inspection in Hamstead
We don’t publish a price list, because sites vary so much. What we look at:
- What state the system is in
- Parking and loading at the site
- Whether we need access equipment or extra panels
- Working hours and out-of-hours timing
What you pay reflects the actual work. That’s why every job is surveyed first, and why the quote is fixed before any work starts.
What we need to know
To speed up the quote, please include:
- When the site is open and when it’s quiet
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Any access panels or hatches you can see
- Photos showing the whole system and its surroundings
Every quote begins with a look at the system, either from photos and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before we start.
Other services in Hamstead
For landlords and multi-site operators
We regularly work with managing agents. Tell us the site, the work and the access arrangements and we will come back with a fixed quote.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
Signs you need TR19 inspection in Hamstead
Not every section of a kitchen extract is easy to get to, so those sections can be skipped time and again. A survey finds the sections that cannot be reached, so the gaps can be closed.
Most sites get in touch after spotting one of these:
- Kitchen extract systems with no recent grease readings
- Surveys needed before quoting a full clean
- Extracts that may be over the 200 micron mean
- Kitchens whose menu or hours have changed
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Swainston Manor is about 3.3 miles south-east), access may need planning.
Comparing quotes
- Whether a survey comes first
- Proof of accreditation you can verify
- What insurance they carry
- Whether a written report and photos are included
Questions from Hamstead
Who enforces fire safety at workplaces in Hamstead?
It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Hamstead. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Who carries out food hygiene inspections in Hamstead?
Food hygiene inspections in Hamstead are carried out by Isle of Wight council. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
How far ahead should we book?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and if it’s an emergency, call us any time.
Can you look after several sites?
Yes. Send the list of sites and the work at each and we’ll quote them together.
How much time does an inspection need?
Expect it to take an hour or two for a single kitchen, longer for a large or complex system. We fit it around when the kitchen is closed or quiet.
What does TR19 inspection cost?
The cost depends on the size of the system, its condition, access and timing. Ask us for a fixed quote and we will normally reply within one working day.
What does a pre-clean survey involve?
The survey covers the whole system, grease readings and access to each section. From it, we plan the clean and quote a fixed price.
Will you produce a report for our insurer?
Yes, anywhere in the area we cover. Tell us what your insurer has asked for and we’ll set the report out to match.
Staff cleaning versus specialist work
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
Aftercare tips
Simple habits between visits make a real difference. We recommend:
- Do not box in or cover duct access panels
- Share inspection reports with your insurer or broker when asked
- Never cook with filters missing
- Mention new equipment or longer hours at the next test
Keep the verification report next to the certificate it relates to. The pair gives a clear record of the clean and the check.
Keep filters clean and in place. Gaps around filters let grease get past them.