Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Grove, Kent
TR19 inspection across Grove and nearby, booked around your opening hours and finished with a written report and photos.
- Sites with gaps in their extract records
- Ductwork where grease may be over the TR19 limits
- An insurer’s request for a TR19 audit
Signs you need TR19 inspection in Grove
TR19® is the benchmark that insurers, fire officers and EHOs refer to. TR19® itself is not law, but the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to assess and reduce fire risk, and in a kitchen that means keeping grease under control.
Any of these means the system needs a check-up:
- Systems cleaned on a calendar with no measurements
- Confirming a clean reached the whole system
- Insurance renewals needing proof of TR19 cleaning
- Missing access panels found on survey
Healthcare kitchens, like those at hospitals such as St Martins Hospital (about 4.9 miles south-west), often cook for long hours, which puts them in BESA’s heavier-use bands.
What your quote should include
- What insurance they carry
- Which accreditations they hold, and whether you can check them
- Whether the quote shows VAT
- Whether the figure could change on the day
TR19 inspection in Grove
BESA sets minimum cleaning intervals by daily use: every 3 months for heavy use of 12 to 16 hours a day, every 6 months for moderate use of 6 to 12 hours, and every 12 months for light use of 2 to 6 hours. Grease testing shows whether your kitchen needs cleaning more often than that. Common call-outs are for pre-clean surveys before a first TR19 clean and confirming a clean reached the whole system, on access surveys, wet film thickness tests and deposit thickness tests.
Work in a small place like Grove starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
The paperwork matters as much as the work. You get a written report with photos after every visit, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Location
- Grove (CT3)
- Region
- Kent
- Records
- Certificate plus before-and-after pictures
- Price
- Fixed quote, typically within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Grease, kitchens and Grove
The FSA’s food hygiene register includes about 3 pubs, bars and clubs within about 1.5 miles of central Grove. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. It’s Canterbury City council that sends environmental health officers to food businesses in Grove. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after photos from each clean are a simple way to show the extract is in hand. Fire safety in Grove falls to Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Church and community hall kitchens, near Church of St Mildred or anywhere around Grove, are easy to forget, but their extracts collect grease like any other. Term dates shape school work: for a school like Preston Primary School, an extract clean fits neatly into a half-term or summer break.
Grove is about 5 miles south-east of Herne Bay, in Kent. Anywhere in CT3, we can take on TR19 inspection. Our Kent coverage runs to 922 places, Grove among them. We also work in Maidstone, around 30 miles away.
Postcode districts we cover here for TR19 inspection: CT3. We also cover the places around Grove: Preston (1 mile south-east), Upstreet (1 mile north), West Stourmouth (1 mile north-east), East Stourmouth (2 miles east) and Sarre (2 miles north-east). We also work in nearby towns such as Canterbury (6 miles west), Margate (9 miles north-east), Dover (13 miles south), Ramsgate (9 miles east), Broadstairs (10 miles east) and Whitstable (8 miles west).
Around Grove
In Grove, that means kitchens and buildings near The Grove Ferry Inn and Grove Ferry Picnic Area and the streets around them. For rail, the closest station is Sturry station, about 3.8 miles west of the centre. Nearby you will also find St Martins Hospital (4.9 miles south-west).
Towns and villages near Grove
More services for Grove
Looking after it afterwards
A little care between visits keeps the system in better shape. We recommend:
- Keep canopy edges and gutters wiped down
- Keep access panels clear and unpainted
- Share inspection reports with your insurer or broker when asked
- Mention new equipment or longer hours at the next test
You get a report with the grease readings, where they were taken and pictures of each point. Keep it with your fire safety and TR19 records.
Regular grease readings keep the cleaning interval honest. It spots changes in how fast grease builds.
Your questions about TR19 inspection in Grove
Which environmental health team covers Grove?
The local authority for Grove is Canterbury City council, and its environmental health team does the inspecting. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Is Grove within the area you cover?
Yes. Villages and rural sites across the South East are part of our work, Grove included. The journey is planned ahead, so a few details about the route help.
Which sectors do you work in?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
How much does TR19 inspection cost?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before we start.
What do the grease readings need to be?
TR19® Grease says grease should not go over a mean of 200 microns between cleans. Any reading of 500 microns or more needs immediate spot cleaning.
What if parts of the system can’t be reached?
Anything we can’t reach goes on the report, with a note of where it is, and we tell you what would make it reachable, such as extra access panels in ductwork.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
What does a pre-clean survey involve?
It’s a look at the whole extract before it’s cleaned, with readings and photos. We can work from pictures and details, or visit, as suits the job.
How it works
When we arrive, we check the system against the survey or the pictures you sent. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes around an hour or two per canopy and duct system. We agree a date with you, plan the drive to Grove and turn up when the site is quiet.
- We go through any past certificates and reports.
- We follow the extract from canopy to discharge.
- We note where access panels are and where more are needed.
- Grease readings are taken and pictures recorded.
- We report back with readings and a fixed quote.
Before we arrive
- Tell us where we can park and unload
- Agree a time when the area can be out of use
- Tell us about site rules, permits or sign-in
How to get a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Related advice
Multi-site and managed buildings
From a single site to a large estate, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with pictures.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
How we price TR19 inspection
Sites vary more than people expect. The main factors:
- How many systems or sites are involved
- What state the system is in
- Parking and loading at the site
- Whether we need access equipment or extra panels
The cost depends on how big the system is, what state it’s in and how easy it is to reach. We give you a fixed price before work begins, so there are no surprises.
Helping us quote
To speed up the quote, please include:
- The paperwork from the last visit, if you have it
- Photos showing the whole system and its surroundings
- Any access panels or hatches you can see
- Problems your staff have spotted
Quotes are quick. Send a few details and photos, and we normally reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
What your team can do, and what needs us
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
Why it’s worth doing now in Grove
Skipping grease testing leaves the cleaning interval to guesswork. If grease reaches 500 microns anywhere, TR19® Grease calls for immediate spot cleaning, and you can only act on that if you’ve measured it. Rural sites can’t always move to another kitchen or room when something fails.
We don’t list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
Why us?
- We are fully insured
- Accredited under CHAS and SafeContractor, with ISO 9001
- A written report with photos after each visit
- A fixed price before any work starts
Read how cleaning jobs are priced or how to check a contractor.