Isle of Wight · TR19 inspections and grease testing
TR19 inspections in Freshwater
TR19 inspection for Freshwater, with a survey first and a report with photos at the end. Call for a fixed quote.
- Missing TR19 certificates or history
- Systems cleaned on a calendar with no measurements
- Checking the result of a recent clean
Common questions in Freshwater
Is TR19 inspection any different in a coastal place like Freshwater?
It can. Freshwater is within about 1 mile of the coast, and salt air speeds up corrosion. Corroded fixings and housings are noted on the report so they can be dealt with.
Do you work in villages like Freshwater?
Yes, Freshwater is part of our area, however small the site. Photos of the system and directions to the site help us plan the visit.
How much notice do you need?
The more notice, the better, especially for out-of-hours work. We normally quote within one working day, and emergencies are covered by our 24/7 line.
How do you measure grease in a kitchen extract?
Grease thickness testing measures the layer of grease on the duct surfaces, by WFTT or DTT. The results are given in microns.
Is there a survey before the work?
Yes. For many sites, photos and a few details are enough, and larger or hidden systems get a visit.
At what point does grease need cleaning?
Two figures matter: a mean of no more than 200 microns between cleans, and 500 microns at any single point, which needs immediate spot cleaning. We show your readings against those figures.
Can one contract cover all our sites?
Yes. Send the list of sites and the work at each and we’ll quote them together.
When should we have our next grease test?
We suggest a next test date in every report, based on the readings and how the kitchen is used. A risk assessment based on measured grease should set the interval.
TR19 inspection in Freshwater
Think of a TR19 inspection as the diagnosis before the treatment. Readings, pictures and notes on access are gathered from end to end, so the clean can be planned properly. If you have kitchens whose menu or hours have changed and extracts that may be over the 200 micron mean, we can help, from wet film thickness tests, insurer audits and post-clean checks onwards.
In a smaller place like Freshwater, the kitchens with extract systems are more likely to be a pub, a café, a takeaway or a school or care home kitchen than a big restaurant. Quieter kitchens still collect grease in the duct, just more slowly, so cleaning is planned around how much it cooks and what the readings show.
The paperwork matters as much as the work. Each visit is written up with pictures, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Location
- Freshwater (PO40)
- Wider area
- Isle of Wight
- Paperwork
- Certificate and photo report
- Quotes
- A fixed price before we start
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Managing agents and facilities teams in Freshwater
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
What happens if it’s left?
Without readings, you are guessing when to clean. Any reading of 500 microns or more needs immediate spot cleaning under TR19® Grease, and you can only act on that if you’ve measured it. Even a site near Freshwater that is only busy part of the week needs its system checked on a schedule.
Several systems or sites on one quote can make for a more efficient booking. Tell us about everything you’d like looked at, and you’ll get one fixed quote.
Why book with us
- Evenings, overnight and weekends, plus 24/7 emergency callout
- A written report with photos after each visit
- Every job surveyed first
- We are fully insured
Read our cost guide and how to check a contractor.
TR19 inspection around Freshwater
Freshwater lies within about 1 mile of the sea. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. According to Food Standards Agency records, there are about 7 pubs and bars and about 4 hotels and B&Bs in Freshwater and the streets around it, up to about 1.5 miles out. Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. Kitchens in Freshwater get their food hygiene inspections from Isle of Wight council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
If you run a church or community hall kitchen, near All Saints' Church or elsewhere in Freshwater, its extract still collects grease from every lunch and event. If you look after a school kitchen, at a school such as All Saints Church of England Primary School or anywhere near Freshwater, the holidays are the usual time for a TR19® clean. Mottistone Manor, about 4.6 miles south-east, is one of the historic houses near Freshwater; if you run event catering at a venue like that, cleans can be booked between functions.
Freshwater is about 5 miles south of Lymington, in the Isle of Wight. We provide TR19 inspection for businesses, landlords and public buildings in Freshwater and the rest of the Isle of Wight. Freshwater is one of 125 places in the Isle of Wight where we work for commercial clients. There’s also a page for Southampton, about 17 miles away.
We cover every part of the PO40 postcode area for TR19 inspection and the streets around it. That includes premises on Dall Square, High Street and The Square and the roads around them. We also cover the places around Freshwater: Easton (1 mile south-east), Colwell (1 mile north-west), Norton Green (1 mile north), Afton (1 mile south-east) and Totland (1 mile west). Within a short drive, we also cover Newport (10 miles east), Cowes (11 miles north-east), Shanklin (15 miles east), Ventnor (15 miles south-east), East Cowes (12 miles north-east) and Barton (10 miles east). Island and remote sites take a little more planning, so please mention your location when you give us a ring on 0345 646 2711, or email photos.
What’s near Freshwater
In Freshwater, that means kitchens and buildings near The Red Lion pub. Well-known places in the area include Yarmouth Castle (1.9 miles north-east) and Ferguson Family Museum (0.7 miles north-east). Not far away are Lymington and Keyhaven Marshes Nature Reserve and Afton Down.
What we do, step by step
Night work is normal for us. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. The visit itself takes a morning or less for one kitchen, more where there are several systems. Evenings, weekends or a closed day all work for a site in a place like Freshwater.
- We go through any past certificates and reports.
- The layout is traced from the canopy to the discharge.
- Access panels are located and any missing ones noted.
- We measure the grease and photograph each point.
- We report back with readings and a fixed quote.
Getting ready for the visit
- Have your last certificate or report to hand
- Clear loose items from the work area
- Let us know about parking and loading
Getting a quote
Need a price for TR19 inspection? Please call 0345 646 2711, or email photos and tell us about the site. We will talk you through the work and give you a fixed quote before anything is booked.
Related advice
When something else is needed
We’ll always give you a straight diagnosis, so here’s what TR19 inspection will not do:
- Removing the grease, which is a separate clean
- Installation problems, which fall under design guidance such as DW172
- Fan breakdowns, which need a repair visit
Not sure which it is? You can phone us on 0345 646 2711 or drop us a line and we will tell you honestly.
What we work on in Freshwater
- Wet film thickness tests
- Insurer audits
- Access surveys
- Pre-clean surveys
- Post-clean checks
- Deposit thickness tests
Aftercare tips
Once we’ve finished, these simple steps help:
- Have the latest report ready for insurance renewals
- Keep to the recommended interval
- Do not box in or cover duct access panels
- File every inspection report with your certificates
For an insurer audit, send them the report as it is, including readings, photos and any inaccessible sections.
Keep certificates, reports and readings in one place so you can produce them quickly.
Also near Freshwater
Other services in Freshwater
How the job changes from site to site
Extract fan and discharge
A greasy fan works harder and wears faster. Readings show if it needs attention before the next clean.
Canopy and plenum
Clean-looking filters do not mean a clean plenum. So we measure behind the filters, not just in front.
What staff can safely do
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
Staff cleaning does not replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.