Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Denton, Kent
TR19 inspection for Denton, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Uncertainty over how often to clean
- Heavy grease suspected in the plenum or ducts
- Confirming a clean reached the whole system
Staff cleaning versus specialist work
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
TR19 inspection in Denton
Taking on a kitchen in Denton with no cleaning records? Start with an inspection. We survey the system, measure the grease and tell you what needs doing, so the next step is based on facts. The work covers deposit thickness tests, pre-clean surveys and post-clean checks, and the jobs we see most are sections of duct that can’t be reached and post-clean verification after another contractor’s clean.
Work in a small place like Denton starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Nothing is signed off by word of mouth: a dated report with pictures of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Denton (CT4)
- Region
- Kent
- Reporting
- TR19® certificate and photo report
- Quote
- Fixed quote, typically within a working day
- Working hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Places near Denton
Also in Denton
What affects the quote in Denton
Your quote is based on your site. We take into account:
- The scale of the work
- When the work can happen, such as evenings, overnight or weekends
- Travel, parking and unloading
- Any permits to work or inductions
No two sites are the same, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
Asking for a quote
We can often survey from photos. The most useful are:
- Any symptoms, from odd noises to smells or leaks
- Any access panels or hatches you can see
- The times we could work without disrupting the site
- The site address and the type of premises
Every quote begins with a look at the system, from your photos and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before work begins.
What the work involves, part by part
Restaurants, pubs and hotels
A kitchen running from breakfast to late service builds grease quickly. Readings show if the cleans are frequent enough.
Schools, hospitals and care homes
We fit testing around service times and school holidays so meals are not affected.
Grease, kitchens and Denton
Food Standards Agency data counts about 3 restaurants, cafés and canteens within roughly a mile and a half of the centre of Denton. For any of them with a canopy, measuring grease is better than guessing when to clean. Food hygiene inspections in Denton are the job of Canterbury City council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after pictures from each clean are a simple way to show the extract is in hand. Denton sits within the area of Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
Church and community hall kitchens, near Church of St Mary Magdalene or anywhere around Denton, are easy to forget, but their extracts collect grease like any other.
Denton is about 6 miles north-west of Dover, in Kent. Whether your site is in the middle of Denton or further out, TR19 inspection is available to all kinds of commercial premises, from small sites to large estates. Across Kent, we cover 922 places, and Denton is one of them. You can also see our page for Maidstone, about 28 miles away.
Work in CT4 is surveyed, quoted and booked the same way as anywhere else. Streets in the area include The Street and Canterbury Road, and we cover them all for TR19 inspection. We also cover the places around Denton: Lodge Lees (1 mile west), Wootton (1 mile south-east), Shelvin (1 mile east), Breach (1 mile west) and Selsted (2 miles south). Further out, we also cover Ashford (13 miles west), Canterbury (8 miles north-west), Dover (6 miles south-east), Folkestone (7 miles south), Ramsgate (15 miles north-east) and Whitstable (13 miles north-west).
Local landmarks in Denton
We work in commercial kitchens and buildings around Jumping Downs and The Jackdaw Inn, among other places. Denton’s nearest station is Shepherds Well station, about 2.7 miles east. Green spaces nearby include Cheriton Hill.
What we are called out for in Denton
Insurers, fire officers and environmental health officers look to TR19® as the benchmark. TR19® itself is not law, but the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to assess and reduce fire risk, and grease in the extract is part of that risk.
Keep an eye out for these warning signs:
- An insurer’s request for a TR19 audit
- Missing access panels found on survey
- Uncertainty over how often to clean
- Missing TR19 certificates or history
If your kitchen is in a listed or historic building, like the houses around Denton (Acrise Place is about 3.4 miles south-west), fitting access panels needs care.
Before booking anyone
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- When the next visit should be, and why
- What’s included in the scope, part by part
- What happens if part of the system cannot be accessed
When it’s something else
TR19 inspection can’t fix everything, and we’ll tell you before we start. It does not solve:
- Sections with no access, until panels are fitted
- Design faults in the extract system
- The legal duty, which stays with the responsible person
If in doubt, call us on 0345 646 2711 or use the quote form and we’ll say what we think before booking.
What we work on in Denton
- Insurer audits
- Wet film thickness tests
- Deposit thickness tests
- Post-clean checks
- Access surveys
- Pre-clean surveys
The process
We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool before work begins, and floors and nearby surfaces are sheeted. The work itself takes around an hour or two per canopy and duct system. Rural roads and tight entrances are worth telling us about before a visit to Denton.
- We agree a time when the kitchen is closed or quiet.
- The system is checked from canopy to discharge.
- We take WFTT or DTT readings at set points along the system.
- Each test point and any access problems are photographed.
- We send a report setting out the readings, pictures and next steps.
Getting ready for the visit
- Agree a time when the area can be out of use
- Clear loose items from the work area
- Plan for cooking equipment or plant to be off before we arrive
Get a fixed quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Related advice
Questions from Denton
Which fire authority looks after Denton?
That is Kent Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Will you come out to Denton?
Yes. Denton is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Can you verify a clean after it’s been done?
It’s an inspection after cleaning, to show what state the system was left in, for our cleans and other firms’ alike.
How much does TR19 inspection cost in Denton?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. We fix the price before any work starts.
What does TR19 mean?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It is not law, but it’s the benchmark.
Can you set up regular visits?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
What information do you need?
Where the site is, what it is and when it’s open, plus photos of the system and your last certificate or report if you have one.
How much notice should we give?
Book as early as you can for planned work, particularly if your next visit is nearly due. Emergencies are different, because our line is open 24/7.
Why it’s worth doing now in Denton
An EHO visit, an insurance renewal or a fire risk assessment is a bad time to find your extract records are thin. A recent inspection report means you’re ready when asked. Out of sight is the usual reason a rural system goes too long without attention.
Putting the work off seldom saves money. Problems in a system tend to grow, and a neglected system can mean more work. If you’re not sure what’s needed, call us on 0345 646 2711, or email photos for straight advice and a fixed quote.
Why us?
- CHAS, SafeContractor and ISO 9001
- Evenings, overnight and weekends, plus 24/7 emergency callout
- In business since 2009
- Fixed quotes from a survey or pictures
Read how cleaning jobs are priced and how to check a contractor.