Kent · TR19 inspections and grease testing
Bullingstone TR19 inspection
For TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification in Bullingstone, one call is all it takes: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Kitchens taken over with no cleaning records
- Extracts that may be over the 200 micron mean
- Post-clean verification after another contractor’s clean
Kitchen extracts in Bullingstone
Food Standards Agency records include about 5 pubs, bars and clubs across Bullingstone and its immediate surroundings (about a mile and a half). Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Kent Fire and Rescue Service covers Bullingstone. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Kitchens in Bullingstone get their food hygiene inspections from Tunbridge Wells council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
A hospital like Kent and Sussex Hospital, about 2.2 miles east, is the kind of site where a kitchen may cook for patients, staff and visitors all day. If your kitchen is in a listed or historic building, like the houses around Bullingstone (Penshurst Place is about 2.2 miles north-west), fitting access panels needs care.
Bullingstone is about 3 miles west of Royal Tunbridge Wells, in Kent. Anywhere in TN3, we cover TR19 inspection for commercial sites. Across Kent, we cover 922 places, and Bullingstone is one of them. There’s also a page for Maidstone, about 16 miles away.
All of TN3 is covered for TR19 inspection, from the main roads to the quietest streets. TR19 inspection is available to premises on Bullingstone Lane, Ewehurst Lane and Langton Road and the roads around them. We also cover Speldhurst (1 mile north-east), Poundsbridge (1 mile north-west), Langton Green (1 mile south), Stockland Green (1 mile north-east) and Rusthall (1 mile south-east). Further out, we also cover Sevenoaks (9 miles north), Royal Tunbridge Wells (3 miles east), Tonbridge (5 miles north-east), Kings Hill (12 miles north-east), Paddock Wood (8 miles east) and Edenbridge (7 miles north-west).
Local landmarks in Bullingstone
Typical jobs here are in premises near The George And Dragon pub and Bennett Memorial Diocesan School, among other places. The closest station to Bullingstone is Tunbridge Wells station, roughly 2.5 miles south-east of the centre. Nearby you’ll also find Chiddingstone Castle (4 miles north-west) and Tunbridge Wells Museum and Art Gallery (2.4 miles east). For a walk, there’s Barden Lake and Broadwater Warren RSPB Reserve.
TR19 inspection for kitchens and businesses in Bullingstone
Before any clean in Bullingstone, we survey the canopy, plenum, filters, ducts, fan and discharge. We check where the access panels are and whether every section can be reached, and record grease readings at set points. Typical jobs include systems that need surveying before cleaning and heavy grease suspected in the plenum or ducts, on post-clean checks, insurer audits and pre-clean surveys.
In a village or hamlet like Bullingstone, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease.
The report is your system’s health record: dated, with photos, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Place
- Bullingstone (TN3)
- Region
- Kent
- Records
- Certificate plus before-and-after photos
- Quotes
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Fixed quotes for TR19 inspection in Bullingstone
A fixed price needs a few facts first. We look at:
- Whether it’s a one-off visit or part of a schedule
- How easy every part is to reach
- Any permits to work or inductions
- The size of the system
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered, and you’ll get one fixed quote.
Asking for a quote
Photos and a few facts are often enough to price the work. Send what you can of the following:
- Close-ups of filters, grilles, hatches or access panels
- How we’d reach plant on a roof or in a plant room
- Problems your staff have spotted
- Any previous report or certificate
Here’s what helps us quote: the address, the type of site and when it’s open, a few photos and any previous report or certificate. Once you have those, give us a ring on 0345 646 2711, or send details by email.
Keeping the system healthy
Think of this as the after-treatment advice, in brief:
- Look out for grease drips round the canopy edge
- Never cook with filters missing
- Wipe the canopy surfaces regularly
- Tell us if menus or opening hours change
The audit report is set out to pass straight to your insurer or broker, including readings, pictures and any inaccessible sections.
Test grease regularly instead of relying on the calendar. It spots changes in how fast grease builds.
Different parts, different methods
Vertical risers
In buildings with several floors, the riser may pass through other tenants’ space, so access is planned in advance.
Canopy and plenum
The plenum behind the filters can carry a lot of grease. We take readings there and photograph it as part of every survey.
Staff cleaning versus specialist work
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
Towns and villages near Bullingstone
Other services in Bullingstone
Common problems we fix in Bullingstone
Grease in a duct is flammable fuel. Flames from the range can be pulled into the canopy and travel through the ducts to other parts of the building. Knowing how much there is lets you act before it becomes a hazard.
Most sites get in touch when they notice something like this:
- Pre-clean surveys before a first TR19 clean
- Missing access panels found on survey
- Kitchens taken over with no cleaning records
- Extracts that may be over the 200 micron mean
Volunteers running a hall kitchen near Church of St Mary the Virgin, or anywhere in Bullingstone, may not know when the extract was last cleaned, and a grease test settles it.
What to look for in a quote
- What happens if part of the system cannot be accessed
- Whether the quote shows VAT
- If the quote is a fixed price or an estimate
- Proof of insurance
Questions from Bullingstone
Can school kitchens in Bullingstone be cleaned in the holidays?
Yes, and it’s the easiest time to do it. The FSA’s register shows about 12 schools and colleges with food registrations within roughly a mile and a half of Bullingstone. Tell us your holiday dates and we will book the visit for when the site is empty.
Which fire service covers Bullingstone?
That is Kent Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Do you work out of hours?
Yes. Much of our work happens in the evening, overnight or at weekends, so the site does not lose a service.
What does a pre-clean survey involve?
The survey covers the whole system, grease readings and access to each section. From it, we plan the clean and quote a fixed price.
How much does TR19 inspection cost?
We don’t publish prices, because the cost depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before any work starts.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line for anything that cannot wait until a planned visit. Call us any time and explain what’s happened.
How long does grease testing take?
It takes a morning or less for one kitchen, more where there are several systems. We fit it around when the kitchen is closed or quiet.
What is post-clean verification?
A post-clean check records grease readings and pictures after the work, for our cleans and other firms’ alike.
What happens on the day
Each visit runs to the same pattern: sheeting and protection first, make the system safe, do the work, clear away and hand over the paperwork. The visit itself takes a couple of hours for a typical kitchen extract system. Visits to a village like Bullingstone are booked in advance, at a time that suits whoever runs the site.
- The visit is arranged for when the kitchen isn’t busy.
- The system is checked from canopy to discharge.
- We take WFTT or DTT readings at set points along the system.
- Each test point and any access problems are photographed.
- The findings go into a report with readings, photos and a recommended next clean.
Before we arrive
- Mention any parking or loading restrictions
- Let us know how we reach the system, including roofs, risers and plant rooms
- Make sure equipment near the work can be switched off and left to cool
Ask for a quote
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before any work starts.
Related advice
Managing agents and facilities teams in Bullingstone
Facilities teams in offices, schools and healthcare sites book us too in Bullingstone and across Kent. Work can be phased by floor, building or site around the people who use them.
Multi-site operators often want one contractor and one number. We cover South East England and London, so visits at different addresses can be planned together and kept to a regular schedule.