Kent · TR19 inspections and grease testing
Bilting TR19 inspection
TR19 inspection in Bilting from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Sections of duct that can’t be reached
- Kitchens whose menu or hours have changed
- Systems that need surveying before cleaning
TR19 inspection in Bilting, done properly
Not every kitchen fits neatly into a calendar. In a busy kitchen, grease can build faster than the minimum intervals allow for, and only measurement shows it. We give your risk assessment measured figures rather than guesses. Typical jobs include sections of duct that can’t be reached and pre-clean surveys before a first TR19 clean, on wet film thickness tests, deposit thickness tests and insurer audits.
Somewhere as small as Bilting, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease.
For insurers and inspectors, the record counts. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Bilting (TN25)
- Region
- Kent
- Records
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Bilting: your questions answered
Which fire and rescue service is responsible for Bilting?
It’s Kent Fire and Rescue Service, which covers Bilting. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
Do you work overnight in Bilting?
Yes, evening, overnight and weekend work is normal for us. The work in Bilting can fit around your hours. Tell us your opening hours when you ask for a quote.
Why survey before a clean?
We check the layout, the grease levels and the access, so the clean goes to plan. Any access problems are flagged so they can be sorted first.
Will you produce a report for our insurer?
Yes. Our TR19 audits cover readings, pictures, access and a recommended cleaning interval. You can pass it straight to your insurer or broker.
Can you price the work without visiting?
In many cases, yes. With good pictures, the site type and your last report, we can price many jobs. Where we cannot see enough, we arrange a survey.
What do you need from me for a quote?
Where the site is, what it is and when it’s open, plus photos of the system and your last certificate or report if you have one.
Do you work with multi-site operators?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together on one programme. Every site has its own report.
Is TR19 a legal requirement?
No. TR19® is not law; it’s BESA’s specification. The law is the Fire Safety Order 2005, under which the responsible person must manage fire risk, and TR19® is what insurers and fire officers look to.
Part by part
Vertical risers
In buildings with several floors, the riser may pass through other tenants’ space, so access is planned in advance.
Extract fan and discharge
The discharge at the end of the system is checked as well, since grease reaches the very end of the system.
Kitchen extracts in Bilting
Environmental health officers from Ashford council inspect food businesses in Bilting. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after pictures from each clean are a simple way to show the extract is in hand. At about 49 miles from central London, Bilting sits well inside the area we cover. Visits are booked around your hours, evenings and weekends included.
For schools such as Wye School, kitchen extract cleaning is normally booked for the holidays, when the canteen is closed. Where a hall near Church of St Lawrence, or anywhere in Bilting, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Bilting is about 6 miles north-east of Ashford, in Kent. Anywhere in TN25, we can carry out TR19 inspection at your premises. Our Kent coverage runs to 922 places, and Bilting is one of them. Our Maidstone page covers sites nearby (18 miles or so).
Work in TN25 follows the same survey, fixed quote and written report as everywhere else we cover. Local streets include Canterbury Road and Bilting Lane, all of which we cover for TR19 inspection. Close by, we work in Godmersham (1 mile north-east), Mountain Street (2 miles north), Molash (2 miles north-west), Chilham (3 miles north-east) and Shottenden (3 miles north). Larger places within reach include Ashford (6 miles south-west), Canterbury (8 miles north-east), Sittingbourne (13 miles north-west), Folkestone (13 miles south-east), Whitstable (11 miles north) and Faversham (8 miles north).
Landmarks near Bilting
Around Bilting, our work takes us to kitchens and buildings near Godmersham Park. For rail, the closest station is Wye station, about 1.7 miles south of the centre. A little further out are Tower keep castle at Chilham (2.5 miles north) and William Harvey Hospital (4.8 miles south).
Staff cleaning versus specialist work
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, next to our reports.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
How the visit works
We are used to working while the site is closed. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. On site, the work takes a morning or less for one kitchen, more where there are several systems. For a village or hamlet like Bilting, tell us about narrow lanes, gates and parking when you book.
- Post-clean verification is booked once the clean is done.
- The same access points are opened up.
- Grease readings are taken again at set points.
- Photos are taken to show the condition after the clean.
- We report the findings and flag any areas that need more work.
How to prepare
- Make sure equipment near the work can be switched off and left to cool
- Dig out any earlier paperwork for the system
- Let us know how we reach the system, including roofs, risers and plant rooms
Get a fixed quote
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Read more
When it’s something else
Before booking, it helps to know what’s not included:
- Mechanical faults in the extract
- Ductwork that was designed or installed badly
- Hidden runs that need access panels first
If you’re not sure, just call us on 0345 646 2711 or use the quote form and we’ll give you a straight answer.
What we work on in Bilting
- Access surveys
- Wet film thickness tests
- Post-clean checks
- Pre-clean surveys
- Deposit thickness tests
- Insurer audits
Looking after it afterwards
How long the results last depends on use and care. We suggest:
- Mention new equipment or longer hours at the next test
- Report grease dripping from the canopy
- Never cook with filters missing
- Don’t box in or cover duct access panels
Each report suggests the next clean and the next test, based on the readings and how the kitchen is used.
Keep all TR19 records together so the history is easy to show.
Why it’s worth doing now in Bilting
Without readings, you’re guessing when to clean. If grease reaches 500 microns anywhere, TR19® Grease calls for immediate spot cleaning, which you will not know without measuring. Planning a trip to Bilting ahead is easier for everyone than a rushed one.
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll explain each part.
Why us?
- A written report with photos after each visit
- Ventilation hygiene specialists since 2009
- A fixed price before any work starts
- We are fully insured
Towns and villages near Bilting
Also in Bilting
When to call us in Bilting
Grease is fuel. A flare-up on the range can be drawn into the canopy and duct, and from there a fire can spread through the ductwork. Measuring it is the first step to keeping it under control.
Most sites get in touch after spotting one of these:
- Systems cleaned on a calendar with no measurements
- Confirming a clean reached the whole system
- An insurer’s request for a TR19 audit
- Heavy grease suspected in the plenum or ducts
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; William Harvey Hospital is the nearest hospital to Bilting, about 4.8 miles south.
What to look for in a quote
- What happens if part of the system can’t be accessed
- Proof of accreditation you can verify
- How VAT is shown on the quote
- Whether the work can be done while the site is closed