Kent · Ductwork cleaning
Ductwork Cleaning in Bilting
Ductwork cleaning in Bilting, surveyed first and signed off with a written report and photos. Ask us for a fixed quote.
- Years of grease along the duct floor
- Readings above 200 microns from a grease thickness test
- Grease leaking from duct joints
About our ductwork cleaning in Bilting
Not every duct has enough access panels. TR19 calls for any section we couldn’t reach to be recorded, and we can fit new access panels so it’s cleaned next time. It’s better to know than to assume. The work covers access panels, bends and junctions and attenuators, and people most often call us about smells of old cooking grease from the ductwork and readings above 200 microns from a grease thickness test.
In a village or hamlet like Bilting, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
The report is your system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Place
- Bilting (TN25)
- Wider area
- Kent
- Records
- TR19® certificate and photo report
- Quotes
- A fixed price before work begins
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Between visits
After the visit, a few habits help the work last:
- Ask for a grease thickness test if the kitchen gets busier
- File each certificate and photo report in the maintenance log
- Keep the fan on while anything is cooking
- Never cook with a filter missing
The report names every part of the duct that couldn’t be reached, with the reason. You can then decide whether to have access panels fitted.
Extra access panels mean more of the duct gets cleaned each time. Grease you can reach is grease that gets removed.
In-house cleaning or a specialist?
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We will take a look and send you a fixed quote.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
What a clean won’t put right
We’ll always give you a straight diagnosis, so here’s what ductwork cleaning will not do:
- Duct sealed behind fixed ceilings or walls
- Undersized or badly laid-out ducts
- Duct sections that need replacing
If you’re not sure, just phone us on 0345 646 2711 or send us an email and we’ll give you a straight answer.
What we work on in Bilting
- Bends and junctions
- Attenuators
- Vertical risers
- Horizontal duct runs
- Multi-storey ducts
- Access panels
The process
The first job on site is protection: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. The work on site takes a shift or more, depending on the length of the runs and the number of access points, and the area is cleaned down before we leave. Pictures of the system and its access let us plan the work in Bilting before we set off.
- Diagnosis: a survey of the duct’s route, size and access.
- A fixed quote follows, based on what we found.
- Each section is cleaned in turn through its access panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, photos and a next clean date.
How to prepare
- Have your last certificate or report to hand
- Move anything stored near the system
- Mention any locked doors, roof access or ceiling voids
Get a fixed quote
Need a price for ductwork cleaning? Please call us on 0345 646 2711 or send us an email with a few details about the site. We will talk you through the work and send you a fixed quote before anything is booked.
Read more
Towns and villages near Bilting
Also in Bilting
How we price ductwork cleaning
We do not publish a price list, because no two systems are the same. What we look at:
- The scale of the work
- Any permits to work or inductions
- A single visit or a regular plan
- The condition we find in the survey
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, and a neglected system can mean more work. If you are unsure, phone us on 0345 646 2711 or email us for straight advice and a fixed quote.
Asking for a quote
To speed up the quote, send us:
- The site address and the type of premises
- How we’d reach plant on a roof or in a plant room
- When the site is open and when it’s quiet
- Detail shots of panels, filters and grilles
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, call 0345 646 2711, or send details by email.
What ductwork cleaning looks like in Bilting
The fire and rescue service for Bilting is Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. In Bilting, food businesses are inspected by environmental health officers from Ashford council. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after photos from each clean are a simple way to show the extract is in hand.
Volunteers running a hall kitchen near Church of St Lawrence, or anywhere in Bilting, may not know when the extract was last cleaned, and a grease test settles it. School kitchens, at schools like Wye School for example, are normally cleaned in the holidays so no lunches are lost.
Bilting is about 6 miles north-east of Ashford, in Kent. We carry out ductwork cleaning for businesses, landlords and public buildings in Bilting and the rest of Kent. We cover 922 places across Kent, from busy centres to quieter spots. Our Maidstone page covers sites nearby, about 18 miles away.
Work in TN25 is surveyed, quoted and booked the same way as anywhere else. Whether your site is on Canterbury Road and Bilting Lane or anywhere close by, we can help. Close by, we work in Godmersham (1 mile north-east), Mountain Street (2 miles north), Molash (2 miles north-west), Chilham (3 miles north-east) and Shottenden (3 miles north). Within a short drive, we also cover Ashford (6 miles south-west), Canterbury (8 miles north-east), Sittingbourne (13 miles north-west), Folkestone (13 miles south-east), Whitstable (11 miles north) and Faversham (8 miles north).
Landmarks near Bilting
Typical jobs here are in premises near Godmersham Park, among other places. For rail, the closest station is Wye station, roughly 1.7 miles south of the centre. Other landmarks nearby include Tower keep castle at Chilham (2.5 miles north) and William Harvey Hospital (4.8 miles south).
When to call us in Bilting
Slow air leaves the most grease behind. Long horizontal runs, bends, changes in size and the foot of a riser all collect more, and those are the points we pay most attention to.
Clients typically contact us after spotting one of these:
- Sections of duct with no access panels
- Grease seeping out of the duct seams
- Readings above 200 microns from a grease thickness test
- Grease pooling at the foot of the riser
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; William Harvey Hospital is the nearest hospital to Bilting, about 4.8 miles south.
What your quote should include
- Whether a survey comes first
- Whether they recommend a next date
- What’s included in the scope, part by part
- Whether they’re fully insured
What the work involves, part by part
Access panels
Extra panels can be installed where there are gaps, so the next clean reaches more of the system. The survey shows where they’re needed.
Bends and transitions
A bend can hold far more grease than a straight run of the same length. We clean it back by hand and with degreaser, and test it before and after.
Bilting: your questions answered
Which environmental health team covers Bilting?
That is Ashford council, whose environmental health officers carry out food hygiene inspections in Bilting. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Is Bilting within the area you cover?
Yes. Bilting is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Which kinds of sites do you work on?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
Do you survey before quoting?
Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.
Do you install duct access panels?
Yes, we fit access panels where the duct needs them. It means more of the duct can be cleaned next time, and the report will show where they’re needed.
How much notice should we give?
That depends on the slot you want and the size of the job. Mention your preferred dates with your enquiry, and if it’s an emergency, call us any time.
What happens if you cannot reach some of it?
The report shows them clearly. Often the fix is extra access, such as new panels in ductwork, and we can fit those.
Can you quote from pictures?
Yes, if we can see what we need. If not, a site survey comes first, and the quote follows that.