Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Acton, Kent
Need TR19 inspection in Acton? We diagnose first, fix the price and book the work around your hours, then sign off with a report and photos.
- Pre-clean surveys before a first TR19 clean
- Checking the result of a recent clean
- Insurance renewals needing proof of TR19 cleaning
Staff cleaning versus specialist work
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, which is where we come in.
TR19 inspection in Acton, done properly
Grease thickness testing tells you how much grease is sitting in the canopy, ducts and fan. We use the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT), taking readings at set points. The results show whether the system needs cleaning and how soon. If you are dealing with insurers asking for TR19 evidence and surveys needed before quoting a full clean, we can put it right, from post-clean checks, insurer audits and wet film thickness tests onwards.
In a small place like Acton, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
Nothing is signed off by word of mouth: a dated report with photos of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Where
- Acton (TN30)
- Region
- Kent
- Reporting
- TR19® certificate and photo report
- Price
- A fixed price before work begins
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Keeping the system healthy
Results last longer with the right care. We suggest:
- Store grease readings where your insurer can see them
- Share inspection reports with your insurer or broker when asked
- Wipe the canopy surfaces regularly
- Report grease dripping from the canopy
If any reading is 500 microns or more, the report flags it for immediate spot cleaning, and we can quote to do it.
Close the access gaps found during inspection, so grease is not left building in hidden parts.
Nearby places to Acton
What else we do in Acton
What we do, step by step
Everything the job needs comes with us, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. On site, the work takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. We agree a date with you, plan the drive to Acton and turn up when the site is quiet.
- First we look at the system’s cleaning history, if there is one.
- The layout is traced from the canopy to the discharge.
- Access panels are located and any missing ones noted.
- Grease readings are taken and photos recorded.
- You get a report and a fixed quote for the clean.
Getting ready for the visit
- Allow time for equipment near the work to be turned off and cool down
- Let us know about permits to work or site inductions
- Make sure someone can let us in and lock up afterwards
How to get a quote
Here’s what helps us quote: the address, the type of site and when it’s open, a few pictures and the last certificate or report, if there is one. Then call us on 0345 646 2711 or email us.
Read more
Common questions in Acton
Can you get to a site in Acton?
Yes, we work in villages as well as towns, and Acton is covered. The journey is planned ahead, so a few details about the route help.
Can you work in Acton outside opening hours?
Yes, nights and weekends are routine for us. The work in Acton can fit around your hours. When you ring 0345 646 2711, or email photos, mention when the site is quiet.
How much does TR19 inspection cost in Acton?
The cost depends on the size of the system, its condition, access and timing. Ask us for a fixed quote and we’ll normally reply within one working day.
How often should grease be tested?
Often enough to know the mean stays under 200 microns between cleans. The readings themselves tell you if the interval needs to change.
Can you set up regular visits?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, to suit the system and how it’s used.
What should I send you?
The site address, the type of premises and your opening hours, plus pictures of the system and your last certificate or report if you have one.
Do you offer emergency callouts?
Yes. There’s a 24/7 emergency line for anything that can’t wait until a planned visit. Ring any time and tell us what’s happened.
What grease levels does TR19 allow?
The TR19® Grease figures are a mean of 200 microns or less between cleans, and immediate spot cleaning wherever a reading hits 500 microns. We show your readings against those figures.
What affects the quote in Acton
Your quote is based on your site. We consider:
- The size of the system
- The condition we find in the survey
- Access, including roofs, risers and ceiling voids
- Travel, parking and unloading
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote and give you a fixed price before any work starts.
What to send for a quote
When you contact us, these details help:
- A few general shots of the system
- Problems your staff have spotted
- The roof, plant room or outside wall the system runs to
- Your opening hours and when the area is out of use
To get a fixed quote, call 0345 646 2711 or use the quote form and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We usually come back within one working day.
Why act early in Acton
Skipping grease testing leaves the cleaning interval to guesswork. Any reading of 500 microns or more needs immediate spot cleaning under TR19® Grease, and you can only act on that if you’ve measured it. In a small place like Acton, a system that fails can take a site out of use.
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before any work starts, so you know where you stand.
Why Acton businesses choose us
- Fixed quotes, normally within one working day
- Work around your opening hours, with 24/7 emergency cover
- Full insurance on every job
- Ventilation hygiene specialists since 2009
Read what affects the cost and our accreditations.
Acton kitchens: local notes
Environmental health officers from Ashford council inspect food businesses in Acton. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. A dated certificate in the maintenance file answers the question before it’s asked. The fire and rescue service for Acton is Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Bursars and site managers at schools such as Wittersham Church of England Primary School tend to book extract cleaning for when the kitchen is empty. Historic houses near Acton, such as Smallhythe Place about 1.5 miles north-west, are a reminder that older buildings with event kitchens can have long, awkward duct routes.
Acton is about 10 miles south-west of Ashford, in Kent. Acton gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Acton is one of 922 places in Kent we cover for TR19 inspection. We also work in Maidstone, about 19 miles from Acton.
Work in TN30 follows the same survey, fixed quote and written report as everywhere else we cover. Neighbouring places we cover for TR19 inspection include The Stocks (1 mile south), Stone Corner (1 mile north-east), Wittersham (1 mile south-west), Reading Street (2 miles north-east) and Stone in Oxney (2 miles east). Within a short drive, we also cover Ashford (10 miles north-east), Tenterden (4 miles north), Kennington (12 miles north-east), New Romney (10 miles east), Staplehurst (12 miles north-west) and Stanhope (10 miles north-east).
What’s near Acton
Around Acton, our work takes us to kitchens and buildings near The Ewe And Lamb Inn and the streets around them. The nearest railway station is Appledore (Kent) station, roughly 4.4 miles east. Other landmarks nearby include Smallhythe Place (1.5 miles north-west) and Ypres Tower (4.9 miles south). The countryside around Acton includes Flatropers Wood.
For landlords and multi-site operators
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We are happy to deal with either side, and the report can go to both.
From a single site to a large estate, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
What we are called out for in Acton
Not every section of a kitchen extract is easy to get to, so those sections can be skipped time and again. An inspection of a system in Acton shows where access panels are missing, so the gaps can be closed.
What we are most often called out for:
- Kitchens whose menu or hours have changed
- Insurers asking for TR19 evidence
- Parts of the system left out of past cleans
- Systems that need surveying before cleaning
A hall kitchen that only cooks for events, whether near Parish Church of St John the Baptist or elsewhere in Acton, still needs its extract cleaned, just less often.
What to look for in a quote
- What’s included in the scope, part by part
- Whether the price is fixed
- How VAT is shown on the quote
- Whether a written report and pictures are included