East Sussex · Kitchen extract cleaning
Kitchen extraction cleaning in Birling Gap
For kitchen extract cleaning in Birling Gap, one call is all it takes: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- A kitchen taken over without any extract records
- Ductwork thick with old, hardened grease
- Grease dripping from the canopy or filters
What kitchen extract cleaning looks like in Birling Gap
Sea air reaches Birling Gap, which sits within about 1 mile of the coast. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. Fire safety in Birling Gap falls to East Sussex Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Food hygiene inspections in Birling Gap are the job of Eastbourne council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Alfriston Clergy House is about 4.7 miles north-west), access may need planning. Where a hall near The Parish Church of St Simon and St Jude, or anywhere in Birling Gap, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Birling Gap is about 5 miles south-east of Seaford, in East Sussex. From the centre of Birling Gap to the outskirts, we cover kitchen extract cleaning for every kind of premises, from a single unit to a large public building. We cover 289 places across East Sussex, from busy centres to quieter spots. Brighton is in our area too, around 16 miles away.
Work in BN20 is surveyed, quoted and booked the same way as anywhere else. Close by, we work in East Dean (1 mile north), Friston (1 mile north), Meads (3 miles east), Holywell (3 miles east) and Old Town (3 miles north-east). Within a short drive, we also cover Eastbourne (5 miles north-east), Bexhill-on-Sea (14 miles north-east), Seaford (5 miles north-west), Lewes (13 miles north-west), Hailsham (9 miles north) and Newhaven (8 miles north-west).
Local landmarks in Birling Gap
The nearest railway station is Eastbourne station, about 3.9 miles north-east of the centre. Nearby you’ll also find Eastbourne District General Hospital (4.1 miles north-east) and Rnli Eastbourne Lifeboat Museum (3.9 miles east). Not far away are Combe Hill.
Kitchen extract cleaning in Birling Gap
Every time food is cooked, warm vapour carries fat up into the extract. As it cools, it clings to the inside of the ductwork and keeps building. That layer will burn, and cleaning the whole system is how you keep it under control. The work covers horizontal duct runs, discharge points and vertical risers, and common reasons people get in touch are years of baked-on grease in the ducts and a system with no record of a TR19 clean. Searching for commercial kitchen extraction cleaning in Birling Gap? We have been cleaning kitchen extracts across the South East since 2009, with a certificate and photo report after every clean.
Each job starts with a look at where grease has built up: wet film or deposit thickness readings show which parts of the duct need the most attention, and readings afterwards go into your report.
In a small place like Birling Gap, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
Think of the report as the system’s health record: a dated account with photos of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Where
- Birling Gap (BN20)
- Wider area
- East Sussex
- Paperwork
- TR19® certificate and photo report
- Quote
- Fixed quote, typically within a working day
- When we work
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Also in Birling Gap
Questions from Birling Gap
Does being near the coast affect kitchen extract cleaning in Birling Gap?
It can. Being within about 1 mile of the sea means more corrosion on metalwork in Birling Gap than inland. A fan housing that’s rusting near the coast can fail sooner, so it’s worth catching early.
Do you cover smaller places like Birling Gap?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before work begins, and anything we remove is contained. Before we leave, we tidy up and clean down.
What about areas you cannot get to?
They’re listed in the report, never skipped quietly. The report says which parts couldn’t be reached and why, along with a quote to put access in.
Will I get a certificate after the clean?
A TR19 certificate, plus a full photo report. It records what was cleaned, what wasn’t accessible and the recommended next clean date.
What happens to the waste?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on, so it does not spread.
When do you clean the extract?
The clean is done when the kitchen isn’t cooking, so evenings, overnight, early mornings and weekends are all options. Equipment needs to be off and cool before any work starts.
Which kinds of sites do you work on?
Any commercial site with kitchens or ventilation, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
Between visits
No system stays clean for ever, but care slows the build-up. A few tips:
- Wipe the canopy down at the end of each day
- Keep the cleaning records where you can find them
- Book the next clean before the date on the report
- Clean the grease filters regularly between TR19 cleans
Any section without access is marked on the report. A TR19 report should record what wasn’t cleaned as well as what was, and we can fit access panels so it’s reached next time.
Run the extract whenever the kitchen is cooking. Switching it off early leaves vapour to settle on the canopy and plenum, and the next clean has more to do.
In-house cleaning or a specialist?
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
Staff cleaning does not replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
What the work involves, part by part
Grease filters
A filter that’s missing or bent lets grease straight past. Each filter is checked as it goes back in, and flag any that do not.
Extract fan and discharge
The discharge is where air leaves the building, which can collect grease and stain the surface around it. We clean it where it can be safely reached, and any limits are recorded.
What affects the cost of kitchen extract cleaning
The price is fixed before any work begins. It’s based on:
- How easy every part is to reach
- What state the system is in
- Travel, parking and unloading
- The number of sites or systems
Every site is different, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
What we need to know
There’s no need for technical detail. Just send:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Your last certificate, test record or report
- When the site is open and when it’s quiet
- Close-ups of filters, grilles, hatches or access panels
For kitchen extract cleaning in Birling Gap, call us on 0345 646 2711, or send details by email. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. A fixed quote typically follows within one working day.
What a clean won’t put right
Not every problem is solved by kitchen extract cleaning, and we’d rather say so up front. It does not solve:
- A damper that sticks or has a damaged link
- A duct that is holed or coming apart
- Extraction that can’t cope with the cooking because of its design
If you are not sure, just call 0345 646 2711 or email us and we will give you a straight answer.
Parts of the system we cover
- Plenums and filters
- Vertical risers
- Extract fans
- Discharge points
- Horizontal duct runs
- Canopies and hoods
When to call us in Birling Gap
A kitchen in Birling Gap builds up grease in the same places as any other: long horizontal runs, bends, the base of risers and around the fan. The cooler the duct, the more grease drops out of the air.
What we’re most often called out for:
- An overdue clean flagged by an EHO or fire officer
- Stale cooking odours from the system
- Missing paperwork after a change of operator
- An extract that has never been cleaned to TR19
Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Birling Gap is Eastbourne District General Hospital, about 4.1 miles north-east.
Comparing quotes
- Whether the quote is based on a survey or pictures
- Proof of insurance
- Whether the price is fixed
- Whether the work can be done while the site is closed
How the visit works
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. All told, the work takes as long as the system needs, from a few hours to several planned visits. Somewhere as small as Birling Gap, the date and timings are agreed with you well before the day.
- We survey the system, from your photos or on site, canopy to discharge.
- We take grease readings at set points and give you a fixed quote.
- The kitchen is closed, the equipment cooled and everything nearby protected.
- Filters, canopy and plenum are cleaned, then the ducts, risers, fan and discharge.
- We re-test, photograph and send your certificate and photo report.
Before we arrive
- Mention any locked doors, roof access or ceiling voids
- Make sure equipment near the work can be switched off and left to cool
- Make sure someone can let us in and lock up afterwards
How to get a quote
To get a fixed quote, phone us on 0345 646 2711, or email photos with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. You’ll typically have a quote within one working day.