Hampshire · Grease trap cleaning
Grease Trap Cleaning in Milford on Sea
Grease trap cleaning in Milford on Sea, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Washing-up water that won’t drain away
- Grease setting in the kitchen pipework
- A grease trap that hasn’t been emptied in a long time
What affects the quote in Milford on Sea
We quote each job individually. These are the things that affect it:
- Parking and loading at the site
- Access, including roofs, risers and ceiling voids
- The size of the system
- A single visit or a regular plan
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re not sure what’s needed, give us a ring on 0345 646 2711, or email photos for straight advice and a fixed quote.
Helping us quote
Photos let us diagnose from a distance. Try to include:
- Your last certificate, test record or report
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Problems your staff have spotted
- Where the site is and what kind of site it is
For grease trap cleaning in Milford on Sea, ring 0345 646 2711 or send us an email. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. A fixed quote usually follows within one working day.
Grease trap cleaning in Milford on Sea, done properly
If the sinks drain slowly or smell, the trap is often the cause. We find the trap, empty it and clean it, then check the water flows properly. If you’re dealing with a routine grease trap service and gurgling from the sink waste, we can put it right, from restaurants and takeaways, school and care home kitchens and under-sink grease traps onwards.
In a smaller place like Milford on Sea, commercial kitchens are more likely to be a pub, a café, a takeaway or a school or care home kitchen. Smaller kitchens still collect grease behind equipment and in the drains.
Every visit ends with a written report and photos, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Where
- Milford on Sea (SO41)
- Region
- Hampshire
- Records
- Photo report after every visit
- Quote
- Fixed quote, normally within a working day
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Do you need grease trap cleaning in Milford on Sea?
Food waste slips past sink strainers or gets rinsed down. It settles in the trap as solids and fill it from below.
The symptoms we are asked about most include:
- A full, neglected grease trap
- Grease setting in the kitchen pipework
- A regular cleaning plan for the grease trap
- A small trap that fills too quickly
Where a church or community hall near Church of All Saints, or anywhere in Milford on Sea, has a kitchen used by volunteers, a periodic deep clean keeps it ready for the next event.
What to look for in a quote
- Whether VAT is included
- Whether the work can be done while the site is closed
- How areas they can’t reach will be recorded
- What’s included in the scope, part by part
How the job changes from site to site
Restaurant and takeaway kitchens
A blocked drain in a busy kitchen can stop service. Regular trap cleaning helps prevent it.
Inline grease traps
Inline traps are fitted into the drain line. They’re larger than under-sink traps but still fill up.
What we do, step by step
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Before we leave, the area is tidied and the paperwork follows. Everything the job in Milford on Sea needs is worked out beforehand, from the survey.
- First, we find the trap and look at its connections.
- We make sure nothing drains into the trap.
- Grease and solids are removed from the trap.
- We clean every part of the inside.
- We refit it, run water through and remove the waste.
How to prepare
- Clear loose items from the work area
- Name a contact who can let us in at the agreed time
- Tell us where we can park and unload
How to get a quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll usually have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Read more
For landlords and multi-site operators
Whether it’s one building or many, you get the same standard: diagnosis, a fixed price, work booked around your hours and a written report with photos.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Keeping the system healthy
A little care between visits keeps the system in better shape. We recommend:
- Collect waste cooking oil separately
- Book trap cleans at a set interval
- Tell us if your menu or hours change
- Tell us when sinks start draining slowly
Scrape plates into the bin before washing up. Sink strainers help catch solids so less solid waste gets through.
Grease that gets past the trap sets in the drains. Clearing it then is a bigger job so prevention is the easier route.
Towns and villages near Milford on Sea
Other services in Milford on Sea
Milford on Sea: your questions answered
Do you work overnight in Milford on Sea?
Yes, out-of-hours work is a big part of what we do. That way a site in Milford on Sea doesn’t have to lose a day’s trading. Let us know the hours you are closed and we’ll book within them.
Who would carry out a food hygiene inspection at a kitchen in Milford on Sea?
That’s New Forest council, whose environmental health officers carry out food hygiene inspections in Milford on Sea. Keep the dates of your last deep clean and grease trap visit with your food safety records, ready if an officer asks.
How often should a grease trap be cleaned?
That depends on the trap and the kitchen. Small under-sink units fill faster than larger traps, and busy kitchens fill them faster still. We will suggest an interval after the first clean.
Do you provide a certificate or report?
Yes, always. It’s a dated, written report with pictures, and TR19® Grease cleans come with a certificate through the BESCA VHE portal. File it with your fire safety records.
What problems does a full grease trap cause?
Once it’s full, grease passes straight through. The grease hardens in the pipes, leading to blocked drains and smells and can end up adding to sewer blockages.
Which records should we keep?
Visit reports, certificates and your in-house cleaning logs. Insurers, fire officers and EHOs may all ask to see them, so keep them where they can be found quickly.
How do you protect the area?
By covering it before any work starts. We keep the work contained and leave the area clean.
Do you survey before quoting?
Yes, every time. We diagnose before we treat: the survey shows what needs doing and what access we need, and the quote is based on that.
What a clean will not put right
To be straight with you, there are a few things this work won’t fix:
- Broken pipework below ground
- Blockages in the public sewer beyond the property
- Drains that need jetting rather than trap cleaning
Not sure which it is? You can phone us on 0345 646 2711 or use the quote form and we will tell you honestly before booking.
What the work covers
- School and care home kitchens
- Restaurants and takeaways
- Inline grease traps
- Pot wash sinks
- Under-sink grease traps
- Kitchen waste pipes
Milford on Sea kitchens: local notes
Food Standards Agency data counts about 15 restaurants, cafés and canteens within roughly a mile and a half of the centre of Milford on Sea. Fat from washing up sets hard in pipes, and kitchens like these produce plenty of it. Food hygiene inspections in Milford on Sea are the job of New Forest council’s environmental health team. Grease behind equipment or on a ceiling is the kind of thing an inspection can note. Photos and dates from each deep clean make a useful record.
If you look after a school kitchen, at a school such as Milford-on-Sea Church of England Primary School or anywhere near Milford on Sea, the holidays are the time for a deep clean or a grease trap clean. If you run catering at a healthcare site, such as a hospital like Lymington New Forest Hospital about 3.6 miles north-east, deep cleans and grease trap visits are planned so meals still go out.
Milford on Sea is about 3 miles south-west of Lymington, in Hampshire. Anywhere in SO41, we cover grease trap cleaning for commercial sites. Our area takes in 683 places across Hampshire, large and small. You can also see our page for Southampton, about 16 miles away.
Here we cover the SO41 postcode area for grease trap cleaning. Whether your site is on High Street, Love Lane and Greenbanks Close or anywhere close by, our technicians can take on the work. If your site is just outside Milford on Sea, we cover Lymore (1 mile north-east), Keyhaven (1 mile east), Everton (1 mile north), Lower Pennington (2 miles north-east) and Pennington (2 miles north-east). We also work in nearby towns such as Totton (14 miles north), Hythe (13 miles north-east), New Milton (4 miles north-west), Ringwood (12 miles north-west), Barton on Sea (3 miles west) and Dibden Purlieu (12 miles north-east).
What’s near Milford on Sea
Typical jobs here are in premises near The Red Lion Public House and Priestlands School and the streets around them. The nearest railway station is Lymington Town station, about 3.4 miles north-east of the centre. Nearby you’ll also find Yarmouth Castle (4.3 miles east) and Lymington New Forest Hospital (3.6 miles north-east). The countryside around Milford on Sea includes Milford on Sea LNR and Tennyson Down.