Surrey · Grease filter exchange
Millbridge grease filter exchange
Our technicians work in Millbridge on a scheduled grease filter exchange, swapping dirty canopy filters for clean ones. Fixed quotes, work around your opening hours and photo reports on every job.
- Staff short of time to wash filters
- Smoke and heat lingering under the hood
- A greasy plenum behind the filters
How we handle grease filter exchange in Millbridge
Grease filters are the first line of defence in a kitchen extract. Their job is to stop grease getting further into the system and they do it best when they’re clean. With grease filter exchange, clean filters replace greasy ones at regular intervals. If you have gaps where filters have been removed and grease building up behind the canopy filters, we can put it right, from baffle filters, wall canopies and island canopies onwards.
For a kitchen in or near Millbridge, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
A written report with pictures follows each visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Millbridge (GU10)
- Wider area
- Surrey
- Records
- Written report with pictures
- Quotes
- Fixed quote, usually within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Landlords, agents and facilities managers
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.
Keeping records across a portfolio is half the battle. Each visit produces a dated report with photos, ready to show insurers, fire officers or EHOs.
Why deal with it now?
Some kitchens in Millbridge wash filters themselves to save the cost of a service, and that can work if it’s done thoroughly and on time. When it doesn’t happen reliably, an exchange makes it automatic. It’s worth booking a check, because nobody sees inside a duct day to day.
Working hours, access and the scale of the site all affect the cost. We take each of them into account and give you a fixed price before we start.
Why us?
- In business since 2009
- Full insurance on every job
- Accredited under CHAS and SafeContractor, with ISO 9001
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
Take a look at how cleaning jobs are priced or how to check a contractor.
Places near Millbridge
Also in Millbridge
Grease, kitchens and Millbridge
Food Standards Agency records list about 4 restaurants, cafés and works canteens in and around Millbridge, up to about a mile and a half out. Each canopy among them has filters that load with grease and need swapping or cleaning. Millbridge sits within the area of Surrey Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. It’s Waverley council that sends environmental health officers to food businesses in Millbridge. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after pictures from each clean are a simple way to show the extract is in hand.
Farnham Castle, about 3.1 miles north, is one of the historic houses near Millbridge; if you run event catering at a venue like that, cleans can be booked between functions. Term dates shape school work: for a school like St Mary's CofE Aided Infant School, an extract clean fits neatly into a half-term or summer break. A hall kitchen that only cooks for events, whether near Church of St Mary the Virgin or elsewhere in Millbridge, still needs its extract cleaned, just less often.
Millbridge is about 2 miles south of Farnham, in Surrey. We provide grease filter exchange for commercial premises of every kind in Millbridge and the rest of Surrey. Millbridge is one of 395 towns, villages and districts in Surrey where we work for grease filter exchange. Guildford is in our area too, about 11 miles from Millbridge.
Our technicians cover all of GU10 for grease filter exchange and the streets around it. If you need grease filter exchange at premises on Shortfield Common Road, The Reeds Road and Fifield Lane or a nearby road, we can help. We also cover the places around Millbridge: Shortfield Common (1 mile west), Frensham (1 mile south), Tilford Reeds (1 mile north-east), Lower Bourne (2 miles north) and Tilford Common (2 miles east). We also work in nearby towns such as Guildford (11 miles north-east), Woking (14 miles north-east), Camberley (11 miles north), Frimley (10 miles north), Haslemere (7 miles south-east) and Cranleigh (14 miles east).
Local landmarks in Millbridge
We work in commercial kitchens and buildings around Edgeborough School, Weydon School and Underdown nature reserve, among other places. Millbridge’s nearest station is Farnham station, about 2.6 miles north of the centre. Other landmarks nearby include Museum of Farnham (2.7 miles north) and Farnham Castle (3.1 miles north). Open spaces near Millbridge include Culverswell Hill and Farnham Heath.
Millbridge questions
Which fire service covers Millbridge?
It’s Surrey Fire and Rescue Service, which covers Millbridge. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Do you do school kitchen extract cleaning in Millbridge in the summer holidays?
Yes. Half-terms and the summer break are the natural time for school work. With about 3 schools and colleges on the FSA’s register within roughly a mile and a half of Millbridge, it pays to plan holiday dates ahead. You can give us a ring on 0345 646 2711, or email photos with the dates the site is empty.
What happens if you cannot reach some of it?
Anything we cannot reach goes on the report, with a note of where it is, and we tell you what would make it reachable, such as extra access panels in ductwork.
Do you survey before quoting?
Yes. Photos often do the job, and larger or hidden systems get a visit.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. We don’t leave it behind.
Can you set up regular visits?
Yes, of course. Tell us what you have and how it’s used, and we will suggest a schedule and quote for it.
Do we need to close the kitchen while filters are changed?
Visits are short, and we can come before or after service. The clean set goes in as soon as the dirty one comes out.
Which grease filters does the service cover?
We exchange baffle and mesh filters. At the start, we note what your canopies use so every set we bring fits.
What grease filter exchange can’t fix
We will not sell you work that doesn’t address the problem, so here are the limits:
- A canopy that doesn’t capture the vapour properly
- A heavily greased plenum or canopy, which needs cleaning to TR19
- Cooking smells reaching neighbours, which need odour control
If you’re not sure, just call 0345 646 2711 or send us an email and we will give you a straight answer before you book.
Where we work
- School and hospital kitchens
- Baffle filters
- Restaurants and pubs
- Island canopies
- Mesh filters
- Wall canopies
How it works
We’re used to working while the site is closed. A lot of visits happen overnight or at weekends, so a kitchen or building can carry on as usual the next day. The visit itself takes anything from a few minutes to an hour or so, depending on the number of filters. A few photos of the system help us make the most of a visit to a place like Millbridge.
- We look at the canopies and the condition of the filters.
- Any damaged or missing filters are noted.
- Greasy filters are swapped for clean ones.
- We check the filters are seated and the canopy is ready to use.
- We tell you if the plenum or canopy needs a clean.
Before we arrive
- Let us know about permits to work or site inductions
- Plan for cooking equipment or plant to be off before we arrive
- Arrange a key holder or contact on site
Get a fixed quote
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, ring 0345 646 2711 or use the quote form.
Read more
Staff cleaning versus specialist work
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
What affects the quote in Millbridge
We quote each job individually. This is what makes a difference:
- Travel, parking and unloading
- The size of the system
- Site requirements such as sign-in and permits
- Whether several sites go on one quote
A single site or a whole portfolio, we price it on the same basis: the work involved, the access and the timing. The price is fixed before any work starts.
Helping us quote
When you contact us, it’s useful to have:
- The site address and the type of premises
- Your last certificate, test record or report
- Your opening hours and when the area is out of use
- A few general shots of the system
For grease filter exchange in Millbridge, call us on 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, plus photos or the previous report if they’re to hand. A fixed quote normally follows within one working day.
Aftercare tips
Aftercare is simple, and it makes the next visit easier:
- Clear anything stored on or near the canopy
- Watch for grease drips between visits
- Never leave gaps in the filter bank
- Wipe the outside of the canopy as part of daily cleaning
Your team carries on as normal, without the filter washing. Make sure we can reach the canopy on exchange day and tell us if service times change.
Clean filters plus regular full cleans keep the system in good health. A maintenance plan that covers both keeps everything on track.