Kent · Grease filter exchange
Grease Filter Exchange in Martin Mill
Looking for grease filter exchange in Martin Mill? We survey first, send you a fixed quote and work around your opening hours, then sign off with a report and pictures.
- A canopy that drips grease
- A canopy running with filters missing
- Grease collecting in the filter channels
Why act early in Martin Mill
When filters block, extraction suffers. The kitchen gets hotter and smokier, and the fan works harder to pull air through. A regular exchange keeps the airflow where it should be. Equipment tucked in a roof space or outbuilding near Martin Mill rarely gets looked at unless someone books it.
Combining work into one visit or one programme can make for a more efficient booking. Mention every system or site you need covered and we will price it together.
What you get with us
- Photo reports with every job
- Survey first, then a fixed quote
- Fully insured
- One contact for all your sites in London and the South East
Take a look at our cost guide or our accreditations.
How we handle grease filter exchange in Martin Mill
A clean set of filters is a simple, regular dose of prevention. Between full cleans, it keeps the airflow healthy and takes a messy task off your team. Full TR19 cleaning still comes at the right interval, with a certificate. Typical jobs include grease building up behind the canopy filters and hand-washed filters that still look greasy, on school and hospital kitchens, baffle filters and island canopies.
In a small place like Martin Mill, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
A written report with photos follows each visit, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Martin Mill (CT15)
- Wider area
- Kent
- Records
- Photo report after every visit
- Price
- A fixed quote up front
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Looking after it afterwards
No system stays clean for ever, but care slows the build-up. A few tips:
- Look out for drips from the canopy
- Keep the extract on whenever the range is in use
- Don’t refit a filter that is bent
- Make sure we can reach the canopy on exchange day
Keep an eye out for filters that have been taken out. Gaps let grease into the plenum, so let us know if one goes missing or gets damaged.
Damaged filters leave gaps in the defence. Sorting them now keeps grease where it can be caught.
FAQs for Martin Mill
Which fire service covers Martin Mill?
It’s Kent Fire and Rescue Service, which covers Martin Mill. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Who carries out food hygiene inspections in Martin Mill?
That’s Dover council, whose environmental health officers carry out food hygiene inspections in Martin Mill. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Do you have a 24/7 line?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we will advise on what to do next.
Are you insured?
Yes. Full insurance covers our work, and we’ve been trading since 2009.
Is there a cleaning option for the filters we have?
Yes, filters can be cleaned on a schedule as well as exchanged. We will explain the options when we quote.
What happens to the waste?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on rather than letting it spread.
Do you handle baffle and mesh filters?
We exchange baffle and mesh filters. At the start, we note what your canopies use so every set we bring fits.
What does grease filter exchange cost?
The cost depends on your filters and the schedule. Just phone us on 0345 646 2711 or email us for a fixed quote, normally within one working day.
How the visit works
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool first, and floors and nearby surfaces are sheeted. On site, it takes a short visit, depending on how many filters the canopies hold. If you can send photos, we can arrive in Martin Mill knowing what to expect.
- The filters in each canopy are measured and counted.
- We set the interval with you.
- On each visit, we remove the greasy filters.
- A clean set is fitted and checked for gaps.
- We take the greasy set away and confirm the next date.
Preparing for the visit
- Make sure equipment near the work can be switched off and left to cool
- Clear the space around the work
- Tell us about site rules, permits or sign-in
Getting a quote
Need a price for grease filter exchange? Please give us a ring on 0345 646 2711 or drop us a line with a few details about the site. We will explain what we’d do and send a fixed quote before anything is booked.
Related advice
Different parts, different methods
Canopy filter housings
Every exchange includes a check of how the filters sit, because gaps let grease through.
Busy restaurant and pub kitchens
The more a kitchen cooks, the more grease the filters see. Changing them on time protects the ducts behind.
Common problems we fix in Martin Mill
However long the kitchen cooks each day, the filters see every minute of it. A kitchen that cooks all day loads its filters quickly, so it needs more frequent changes.
Clients typically contact us when they notice something like this:
- Grease filters clogged with grease
- Missing filters in the filter bank
- Filters that come out of the sink still dirty
- A greasy plenum behind the filters
Term dates shape school work: for a school like Langdon Primary School, an extract clean fits neatly into a half-term or summer break.
What your quote should include
- If the quote is a fixed price or an estimate
- Whether the work can be done while the site is closed
- What happens if part of the system can’t be accessed
- Proof of accreditation you can verify
Multi-site and managed buildings
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Running several sites is easier with one contractor. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.
Staff cleaning versus specialist work
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Kitchen extracts in Martin Mill
The coast is only about 2 miles from Martin Mill. Salt in the air is hard on rooftop fans, discharge cowls and fixings, so we check them for corrosion as well as grease. Kent Fire and Rescue Service covers Martin Mill. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. Kitchens in Martin Mill get their food hygiene inspections from Dover council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Keeping each certificate and photo report on file helps show the extract is looked after.
A hospital like Royal Victoria Hospital, about 3.4 miles south-west, is the kind of site where a kitchen may cook for patients, staff and visitors all day. A hall kitchen that only cooks for events, whether near Church of St Augustine or elsewhere in Martin Mill, still needs its extract cleaned, just less often.
Martin Mill is about 3 miles north-east of Dover, in Kent. From the centre of Martin Mill to the outskirts, grease filter exchange is available to all kinds of commercial premises, from a single unit to a large public building. Our Kent coverage runs to 922 places, Martin Mill among them. We also work in Maidstone, about 36 miles from Martin Mill.
Grease filter exchange in CT15 follows the same survey, fixed quote and written report as everywhere else we cover. If you need grease filter exchange at premises on Station Road, Barley Close and Lucerne Lane or anywhere close by, we can help. Other places close to Martin Mill include Martin (1 mile north-west), East Langdon (1 mile west), West Cliffe (1 mile south), West Langdon (1 mile north-west) and Ringwould (1 mile north-east). Further out, we also cover Canterbury (14 miles north-west), Margate (15 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (14 miles north).
Around Martin Mill
Typical jobs here are in premises near Duke of York's Royal Military School and The Lantern Inn and the streets around them. There’s a railway station in Martin Mill itself: Martin Mill station. Other landmarks nearby include Royal Victoria Hospital (3.4 miles south-west) and Dover Castle (3.1 miles south). Green spaces nearby include Dover Western Heights.