Kent · Ductwork cleaning
Ductwork Cleaning in Martin Mill
Ductwork cleaning in Martin Mill, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- An insurer asking for TR19 evidence
- High readings at a recent grease test
- Gaps where access panels were never fitted
Ductwork cleaning for kitchens and businesses in Martin Mill
Duct Doctor has cleaned kitchen extract ductwork since 2009, working across London and the South East. As a BESCA Vent Hygiene Elite member, our duct cleaning is done to BESA TR19® Grease, and our certificates are issued through the BESCA Vent Hygiene Elite portal. The work covers access panels, attenuators and bends and junctions, and people most often call us about grease leaking from duct joints and readings above 200 microns from a grease thickness test.
Work in a small place like Martin Mill starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Duct Doctor has been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
- Place
- Martin Mill (CT15)
- Wider area
- Kent
- Reporting
- TR19® certificate and photo report
- Quote
- A fixed price before work begins
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
How we price ductwork cleaning
The survey tells us what the work involves. The main factors are:
- How big the system is
- What state the system is in
- When the work can happen, such as evenings, overnight or weekends
- Where the site is and how we reach it
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, which can make the next visit longer. If you are unsure, ring 0345 646 2711, or send details by email and we will give you an honest view and a fixed quote.
What we need to know
You don’t need the technical terms. Just send:
- The paperwork from the last visit, if you have it
- The postcode and the type of business
- Detail shots of panels, filters and grilles
- A few general shots of the system
There’s no standard price list, because every site is different. We look at your system first, from pictures or on a visit, then send a fixed quote. To start, phone us on 0345 646 2711 or send us an email.
Grease, kitchens and Martin Mill
At about 2 miles from the coast, Martin Mill is close enough for sea air to matter. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. Kitchens in Martin Mill get their food hygiene inspections from Dover council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A dated certificate in the maintenance file answers the question before it’s asked. Martin Mill is covered by Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Term dates shape school work: for a school like Langdon Primary School, an extract clean fits neatly into a half-term or summer break. Where a hall near Church of St Augustine, or anywhere in Martin Mill, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Martin Mill is about 3 miles north-east of Dover, in Kent. Across the CT15 area, we can carry out ductwork cleaning at your premises. Martin Mill is one of 922 towns, villages and districts in Kent we cover for commercial clients. For sites nearby, see our Maidstone page, about 36 miles away.
Work in CT15 follows the same survey, fixed quote and written report as everywhere else we cover. You’ll find streets such as Station Road, Barley Close and Lucerne Lane, all of which we cover for ductwork cleaning. If your site is just outside Martin Mill, we cover Martin (1 mile north-west), East Langdon (1 mile west), West Cliffe (1 mile south), West Langdon (1 mile north-west) and Ringwould (1 mile north-east). Further out, we also cover Canterbury (14 miles north-west), Margate (15 miles north), Dover (3 miles south-west), Folkestone (10 miles south-west), Ramsgate (12 miles north) and Broadstairs (14 miles north).
Landmarks near Martin Mill
Locally, jobs take us to businesses close to Duke of York's Royal Military School and The Lantern Inn. There’s a railway station in Martin Mill itself: Martin Mill station. A little further out are Royal Victoria Hospital (3.4 miles south-west) and Dover Castle (3.1 miles south). Green spaces nearby include Dover Western Heights.
Your questions about ductwork cleaning in Martin Mill
Do you cover smaller places like Martin Mill?
Yes, we work in villages as well as towns, and Martin Mill is covered. The journey is planned ahead, so a few details about the route help.
Can sea air affect ductwork cleaning in Martin Mill?
It can. Martin Mill is within about 2 miles of the coast, and salt air speeds up corrosion. A fan housing that is rusting near the coast can fail sooner, so it’s worth catching early.
Are you fully insured?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it, for sites that check contractor safety.
What’s TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
How much does ductwork cleaning cost in Martin Mill?
We do not publish prices, because the cost depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before work begins.
Do you offer maintenance contracts?
Yes. Send details of the systems and how they’re used and we will propose a schedule with a fixed quote.
Do you survey before quoting?
Yes, always. We diagnose before we treat: the survey shows what needs doing and what access we need and the fixed quote is built on it.
What happens if there are not enough access panels?
Without a way in, a section can’t be cleaned properly. Those parts are listed, and we can install panels so they’re reached next time.
Towns and villages near Martin Mill
Also in Martin Mill
What staff can safely do
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.
Managing agents and facilities teams in Martin Mill
When the building owner and the occupier are different, the lease normally sets out who maintains what. We’re happy to deal with either side, and the report can go to both.
Running several sites is easier with one contractor. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.
How it works
Night work is normal for us. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. The visit itself takes a few hours for a short run, longer for long runs and tall risers. Photos of the system and how to reach it help us plan a visit to Martin Mill.
- First we diagnose: the route, the access and the grease levels.
- You get a fixed price before work starts.
- Each section is cleaned in turn through its access panel.
- We take extra care at bends and at the foot of risers.
- Readings, photos and a recommended next clean date complete the job.
How to prepare
- Mention any locked doors, roof access or ceiling voids
- Tell us where we can park and unload
- Move anything stored near the system
How to get a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Read more
When to call us in Martin Mill
Wherever the kitchen is, in Martin Mill or elsewhere, the duct fills in the same way: hours of cooking, the type of food and how well the filters are kept. BESA guidance sets minimum intervals of 3, 6 or 12 months depending on daily use.
Keep an eye out for these warning signs:
- Sections of duct with no access panels
- An insurer asking for TR19 evidence
- Grease seeping out of the duct seams
- Readings above 200 microns from a grease thickness test
Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Martin Mill is Royal Victoria Hospital, about 3.4 miles south-west.
What your quote should include
- Whether the work can be done while the site is closed
- What paperwork you get at the end
- Which accreditations they hold, and whether you can check them
- How areas they can’t reach will be recorded
Different parts, different methods
Bends and transitions
A bend can hold far more grease than a straight run of the same length. It’s scraped out and degreased, and test it before and after.
Attenuators and discharge
The discharge is where the duct ends and air leaves the building. It can gather grease and mark the wall or roof around it, so it’s cleaned as far as safe access allows.
What a clean will not put right
Ductwork cleaning can’t fix everything, and we’ll tell you before work begins. It won’t put right:
- Sections that cannot be reached safely without new access (those are recorded, and panels can be fitted)
- Faulty fire dampers
- A worn-out fan that needs replacing
If you’re not sure, just call 0345 646 2711, or send details by email and we’ll give you a straight answer before booking.
What the work covers
- Multi-storey ducts
- Horizontal duct runs
- Access panels
- Bends and junctions
- Attenuators
- Vertical risers